Super Fast Shipping
Five Star Service
No Quibble Returns
Next Day Delivery
Introduction
This DC Motor shield for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current each channel. This shield can be directly stacked on standard Arduino Uno and Arduino Mega.
|
Micro:bit Driver Expansion Board |
Gravity: Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) |
Quad DC Motor Driver Shield for Arduino |
||
| SKU |
DRI0001 |
DFR0548 |
DRI0023 |
DRI0039 |
|
Chip |
L293B |
HR8833 |
DRV8825 |
TB6612FNG |
|
Operating voltage |
5V DC | / | 3.3V/5V |
2.7~5.5V |
| Motor drive voltage |
7-12V DC |
3.5~5.5V DC |
8.2-45VDC |
2.5V-13.5V |
|
Maximum drive current |
1A each way | 1.5A | 1.6A |
1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
|
Motor drive using pins |
PIN4/5/6/7 (Arduino Controllor) |
/ |
D4，D5，D6 D7，D8，D12 |
D3,4,5,6,7,8,11,12 |
|
Dimension |
56x57mm |
63 x 58mm |
83*55*25mm |
52mm * 53mm |
|
Weight (g) |
60 | 64 | 48 | 24 |
|
Frequently used With |
FIT0565/FIT0520/ |
FIT0565/FIT0520/ |
FIT0278/FIT0503 |
FIT0565/FIT0520/ |
|
Key Features |
With motor indicator |
8-way servo interface DC motor x4/stepper motor x2(multiplexed with motor interface) |
Full step, 1/2, 1/4, 1/8, 1/16, 1/32 step mode |
High-speed drive capability, can drive ordinary 2-phase stepper motor to 5000RPM, and drive quad DC at the same time |
|
Gravity: 2x2A Motor Shield for Arduino Twin |
TMC260 Stepper Motor Driver Shield |
2x2A DC Motor Shield for Arduino |
||
| SKU |
DFR0502 |
DRI0017 |
DRI0035 |
DRI0009 |
|
Chip |
TB6612FNG |
L298 |
TMC260 |
L298P |
|
Operating voltage |
2.7~5.5V |
5V |
5V |
5V |
| Motor drive voltage |
12V (peak value) |
4.8 ～ 35V |
40V max |
6.5~12v(VIN Power Supply),4.8~35V (External Power Source) |
|
Maximum drive current |
1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
up to 2A/channel |
up to 2A per motor coil |
2A |
|
Motor drive using pins |
D4 D5 D6 D7 |
D10,11,12,13 |
/ |
Pin 4,5,6,7 are used to drive two DC motor |
|
Dimension |
68.5mm×53.3mm |
56x57mm |
55x55mm |
|
|
Weight (g) |
36 | 35 | 35 | 60 |
|
Frequently used With |
FIT0565/FIT0520/ |
FIT0565/FIT0520/ |
FIT0278/FIT0503 |
FIT0565/FIT0520/ |
|
Key Features |
Integrated XBee Slot, XBee, WiFi Bee, Bluetooth Bee, I2C. |
Mirrored version of DRI0009. Drive pins: 10, 11, 12, 13 Not compatible with IO expansion board V7.1. The control port is four, which reduces the overhead of the Arduino digital ports, and easy to program. |
Suitable for driving bipolar stepper motors. SPI serial bus control or STEP/DIR signal control. Controllers such as Mega with full port expansion. 256 times microstep subdivision. |
Use mirror motor to drive DRI0017 to aviod the conflicts . Support PWM speed control. Support PLL advance speed control |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Accreditations
Be among the first to hear about new product launches, discount codes and more!
