Arducam Pivariety is a camera solution for the Raspberry Pi which takes advantage of the Raspberry Pi hardware Image Signal Processor (ISP) functions. Using Arducam Pivariety camera modules, users can experience better performance and a wider variety of camera and lens options.
For a long time, Raspberry Pi users have been limited to closed-source official supported camera drivers. Now Arducam has made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Auto Gain Control, Lens Shading Correction and more!
This Pivariety module uses a Sony 16MP IMX298 sensor offering up to 4640×3472@10.000 FPS. The module comes with an adapter board, 200mm 15-pin FPC cable (1mm pitch), 73mm 15-pin to 22-pin FPC cable (0.5mm pitch) and an acrylic case with fixings.
NOTE: Pivariety camera modules can only work with libcamera instead of the traditional raspistill application! These modules are intended for experienced users.
Features
- 16MP Sony IMX298 Exmor RS™ colour sensor
- Up to 4640×3472@10.000 FPS
- AEC, AWB
- Programmable focus control
- Gstreamer support
- Upcoming V4L2 support
- Compatible w/ all libcamera-based apps maintained by the Raspberry Pi Foundation
Specifications
- Sensor Type: 16MP IMX298
- Pixel Size: 1.12um x 1.12um
- Optical Size: 1/2.8”
- Active Pixels: 4656 H × 3496 V
- Lens Spec: Focal length: 4.04mm, F.NO: 2.0±5%, FOV: horizontal 62deg
- IR Sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus, programmable focus control
- Frame Rate: 4640×3472@10 fps, 2320×1732@20 fps, 3264×2464@15 fps, 3840×2160@15 fps, 2592×1944@20 fps, 1920×1080@30 fps,
- 1280×800@45 fps, 1280×720@50 fps
- Sensor Output Format: RAW10
- ISP Output Format: Output image format of JPG, YUV420, RAW, DNG; output video format of MJPEG, H.264
- Interface Type: 2-Lane MIPI
- Board Size: 40x40mm
Applications
- UAV/Drones/FPV camera
- Machine Vision
- Robotics
- IoT
- Face Recognition
- Defect Detection
Package Contents
- 1 x Arducam 16MP IMX298 ISP Camera Module
- 1 x Arducam Adapter Board
- 1 x 200mm 15pin 1.0mm FPC cable
- 1 x 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- 1 x acrylic case kit with assembly accessories
Raspberry Pi not included
Resources