{"title":"Adafruit Products","description":"\u003cp\u003eThe Pi Hut are the #1 UK Adafruit Stockist, offering over one thousand Adafruit boards, shields and accessories across the entire Adafruit product range with next day delivery options.\u003c\/p\u003e\n\u003cp\u003eWe hold huge amounts of Adafruit stock, from \u003ca title=\"Adafruit NeoPixels\" href=\"\/collections\/adafruit-neopixels\/\" target=\"_blank\"\u003eAdafruit NeoPixels\u003c\/a\u003e and DotStar LED Strips to the awesome \u003ca href=\"\/collections\/adafruit-feather\" target=\"_blank\"\u003eAdafruit Feather and Featherwing range\u003c\/a\u003e - if Adafruit makes it, we stock it!\u003c\/p\u003e\n\u003cp\u003eAdafruit was originally founded in 2005 by Limor Fried (\"Lady Ada\") with the ultimate aim of creating the best products for makers of all ages and experience levels. Over the last decade, Adafruit has expanded to over one hundred employees in a 50,000+ sq ft. factory in Manhattan NYC, and now offers an endless range of electronics, kits, tools, components and equipment - all of which you can find right here in The Pi Hut Adafruit collection!\u003c\/p\u003e","products":[{"product_id":"adafruit-pitft-2-8-touchscreen-for-the-raspberry-pi","title":"Adafruit PiTFT - 320 x 240 2.8\" TFT+Touchscreen for Raspberry Pi","description":"\u003cp\u003eIs this not the cutest little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 2.8\" display with 320 x 240 16-bit colour pixels and a resistive touch overlay. The plate uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003eIt's designed to fit nicely onto the Pi 1 Model A or B but also works OK with the Pi 4, Pi Zero, Pi 3, Pi 2 or Pi 1 Model A+ or B+ (any Pi with a 2 x 20 connector) as long as you don't mind the PCB overhangs the USB ports by 5mm, see the photos above. If you have a modern Pi with a 2x20 connector, you may want to grab a \u003ca href=\"\/products\/adafruit-pitft-plus-assembled-320x240-2-8-tft-resistive-touchscreen\"\u003ePiTFT 2.8\" Plus\u003c\/a\u003e which does not overhang\u003c\/p\u003e\n\u003cp\u003eUses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there are 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button. See below for the link to get the optional tact switches, they're not included.\u003c\/p\u003e\n\u003cp\u003eAs of \u003cstrong\u003e9\/07\/2024,\u003c\/strong\u003e it comes fully assembled and ready to plug into your Pi! The photos above also show the optional installed slim tactile buttons. The tactile buttons are not included, but you can \u003ca href=\"\/products\/tactile-switch-buttons-6mm-slim-x-20-pack\"\u003epick up a pack of 20 here\u003c\/a\u003e. Some basic soldering is required to install the buttons.\u003c\/p\u003e\n\u003cp\u003eWe've created a custom kernel package based on Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi\"\u003eOur tutorial\u003c\/a\u003e shows you how to install the software, as well as calibrate the touchscreen, show videos, display images such as from your PiCam and more!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDisplay current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default","offer_id":758600257,"sku":"ADA1601","price":33.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-pitft-320-x-240-2-8-tft-touchscreen-for-raspberry-pi-adafruit-ada1601-42622344626371.jpg?v=1724816111"},{"product_id":"gpio-ribbon-cable-for-raspberry-pi-model-a-b-pi-2-pi-3","title":"GPIO Ribbon Cable for Raspberry Pi - 40-pin","description":"\u003cp\u003e\u003cstrong\u003eThe 40-pin GPIO Ribbon Cable connects your Raspberry Pi to external circuits or boards, breaking out the GPIO pins for easy access to power, I2C, SPI, and general input\/output.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThat new \u003ca href=\"\/collections\/raspberry-pi\" title=\"Official Raspberry Pi Products\"\u003eRaspberry Pi®\u003c\/a\u003e Model B+ computer you just got has a row of \u003cstrong\u003e2x20\u003c\/strong\u003e pin headers soldered on - those are the GPIO (general purpose input\/output) pins, and for those of us who like to hack electronics, they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive \u003cstrong\u003eI2C and SPI\u003c\/strong\u003e data, and access the \u003cstrong\u003e3V \u003c\/strong\u003eand \u003cstrong\u003e5V \u003c\/strong\u003epower rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis cable is not compatible with the Raspberry Pi Model B or Model A!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to bridge those contacts out onto another PCB, you'll want this cable! It's \u003cstrong\u003e6 inches long\u003c\/strong\u003e and has \u003cstrong\u003e40 socket \u0026amp; wire sets\u003c\/strong\u003e. Pin #1 is marked with a white wire.\u003c\/p\u003e\n\u003cp\u003eIt's available in custom \u003ca href=\"\/collections\/adafruit\" title=\"Adafruit Products\"\u003eAdafruit\u003c\/a\u003e Black and is an essential accessory for getting started with your brand new B+!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The Raspberry Pi Model A+, Raspberry Pi 2, Raspberry Pi 3, Raspberry Pi 4, and Raspberry Pi 5 are also compatible with this product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/VXgaxtpzoSA?si=qvagZ9kW5-ThHFUl\u0026amp;start=354\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e40-pin GPIO cable for Raspberry Pi Model B+ and later versions\u003c\/li\u003e\n\u003cli\u003e6 inches long with 40 socket and wire sets\u003c\/li\u003e\n\u003cli\u003ePin #1 marked with white wire for easy identification\u003c\/li\u003e\n\u003cli\u003eBridges GPIO pins to external PCBs and components\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Model A+, Pi 2, Pi 3, Pi 4, and Pi 5\u003c\/li\u003e\n\u003cli\u003eNot compatible with original Model A or Model B\u003c\/li\u003e\n\u003cli\u003eAdafruit Black colour\u003c\/li\u003e\n\u003cli\u003eEssential for breadboard prototyping and hardware projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct dimensions: 150mm x 50mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x GPIO Ribbon Cable for Raspberry Pi - 40-pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130974172,"sku":"ADA1988","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gpio-ribbon-cable-for-raspberry-pi-40-pin-adafruit-ada1988-1234222674.jpg?v=1777028017"},{"product_id":"adafruit-perma-proto-hat-for-raspberry-pi-no-eeprom","title":"Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM","description":"\u003cp\u003eDesign your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit.\u003c\/p\u003e\n\u003cp\u003eTo kick off the Adafruit HAT party, we have this Perma-Proto-inspired plug-in daughter board. It has a grid of 0.1\" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless \u003ca href=\"\/collections\/solderless-breadboards\"\u003ebreadboards\u003c\/a\u003e with which you're familiar. There are also long power strips for +3V, +5V and Ground connections to the Pi. Near the top, we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).\u003c\/p\u003e\n\u003cp\u003eThis is just the basic version of our Perma-Proto HAT.  It comes with a printed circuit board and a single \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3-pi-4-zero\"\u003e2 x 20 GPIO Header for Raspberry Pi\u003c\/a\u003e to put your Perma-Proto on top of your \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e (like a nice little hat...) This version does not come with an EEPROM so you can 'stack' it with other HATs without worrying about an EEPROM address collision.\u003c\/p\u003e\n\u003cp\u003eYou can customize your Perma-Proto setup using a standard 2 x 20 stacking header or an \u003ca href=\"\/products\/40-pin-extra-tall-header-push-fit-version-single-shroud\"\u003eextra tall 2 x 20 stacking header\u003c\/a\u003e. You can also swap out the 2 x 20 header with a \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-hat-2x20-short-female-header\"\u003eslim 2x20 type\u003c\/a\u003e if you want it to sit closer to the Pi, or an extra tall one if you want it to sit above the USB\/Ethernet ports.\u003c\/p\u003e\n\u003cp\u003eFor the same Proto HAT with EEPROM \u003ca href=\"\/products\/adafruit-perma-proto-hat-for-raspberry-pi-with-eeprom\"\u003eclick here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eA bit of light soldering is required to attach the header to the PCB but it's easy work.\u003c\/p\u003e\n\u003cp\u003eThis hat is only compatible with the Raspberry Pi Zero\/A+\/B+\/2\/3\/4\/5 (any Pi with a 2 x 20 connector)! \u003cstrong\u003eIt will not work with the Raspberry Pi Model A or B with a 2x13 connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur initial version has the +3V and +5V markings in blue, and the GND markings in red, future orders will have these colours swapped to better match a solderless breadboard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e​Header Dimensions: 5mm x 51mm x 12mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 66mm x 57mm x 2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Fritzing-Library\" target=\"\"\u003eAdafruit Fritzing Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-Perma-Proto-HAT-PCB\" target=\"\"\u003eEagleCAD PCB Files\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130974700,"sku":"ADA2310","price":4.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-perma-proto-hat-for-pi-mini-kit-no-eeprom-adafruit-ada2310-42622774575299.jpg?v=1724816464"},{"product_id":"adafruit-perma-proto-hat-for-raspberry-pi-with-eeprom","title":"Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM","description":"\u003cp\u003eDesign your own Pi HAT, attach custom circuitry and otherwise dress your Raspberry Pi with this jaunty prototyping HAT kit \u003cstrong\u003ewith EEPROM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo kick off the Adafruit HAT party, we have this Perma-Proto-inspired plug-in daughter board. It has a grid of 0.1\" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with which you're familiar. There are also long power strips for +3V, +5V and Ground connections to the Pi. Near the top, we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).\u003c\/p\u003e\n\u003cp\u003eThis is the fancier version of our Perma-Proto HAT. It comes with a printed circuit board and a single \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3-pi-4-zero\"\u003e2x20 GPIO Header for \u003c\/a\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3-pi-4-zero\"\u003eRaspberry Pi\u003c\/a\u003e to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version comes with a blank 24C32 I2C EEPROM soldered on and connected to the EEDAT\/EECLK lines so \u003cem\u003eyou cannot 'stack' it with other HATs\u003c\/em\u003e. \u003ca href=\"https:\/\/github.com\/raspberrypi\/hats\"\u003eHowever, you \u003cem\u003ecan\u003c\/em\u003e program in the EEPROM to make a self-identifying setup using the Pi Foundations' HAT specs\u003c\/a\u003e - please note the specifications are still under development.\u003c\/p\u003e\n\u003cp\u003eYou can customize your Perma-Proto setup using a \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3-pi-4-zero\"\u003estandard 2x20 stacking header\u003c\/a\u003e or \u003ca href=\"\/products\/stacking-header-for-pi-a-b-pi-2-pi-3-2x20-extra-tall-header\"\u003ean extra tall 2x20 stacking header\u003c\/a\u003e. You can also swap out the 2x20 header with \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-hat-2x20-short-female-header\"\u003ea slim 2x20 type if you want it to sit closer to the Pi\u003c\/a\u003e, or \u003ca href=\"\/products\/gpio-header-for-raspberrypi-a-b-pi-2-pi-3\"\u003ean extra tall one if you want it to sit above the USB\/Ethernet ports\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eA bit of light soldering is required to attach the header to the PCB but it's easy work.\u003c\/p\u003e\n\u003cp\u003eFor the same Proto HAT with no EEPROM \u003ca href=\"\/products\/adafruit-perma-proto-hat-for-raspberry-pi-no-eeprom\"\u003eclick here\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis hat is only compatible with the Raspberry Pi Zero, A+, B+, 2, 3, 4, 5 etc (any Pi with a 2 x 20 connector)! \u003c\/strong\u003eIt will \u003cstrong\u003enot\u003c\/strong\u003e work with the Raspberry Pi Model A or B with 2 x 13 connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e​Header Dimensions: 5mm x 51mm x 12mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 66mm x 57mm x 2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-Perma-Proto-HAT-PCB\" target=\"\"\u003eEagleCAD PCB Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Fritzing-Library\" target=\"\"\u003eAdafruit Fritzing Library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130974760,"sku":"ADA2314","price":7.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-perma-proto-hat-for-pi-mini-kit-with-eeprom-adafruit-ada2314-42631428604099.jpg?v=1750781193"},{"product_id":"adafruit-pitft-2-2-hat-mini-kit-320x240-2-2-tft-no-touch","title":"Adafruit PiTFT 2.2\" HAT Mini Kit - 320 x 240 2.2\" TFT - No Touch","description":"\u003cp\u003eThe cute PiTFT got even more adorable with this little primary display for \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e in HAT form! It features a 2.2\" display with 320 x 240 16-bit colour pixels. The HAT uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all, it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.\u003c\/p\u003e\n\u003cp\u003eIt's designed to plug directly into the Raspberry Pi 2, Pi 3, Pi 4, Pi 5, Pi Zero, or Raspberry Pi 1 Model A+ or B+. While not specifically designed for Pi Model A or B, you can use it with A\/B if you solder in an extra-tall 2x13 header (\u003cstrong\u003enot included\u003c\/strong\u003e) instead of the included 2 x 20 header\u003c\/p\u003e\n\u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there are 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eComes as a fully assembled display PCB and an additional 2 x 20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT, but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a '\u003ca href=\"\/products\/stacking-header-for-pi-a-b-pi-2-pi-3-2x20-extra-tall-header\"\u003estacky' type\u003c\/a\u003e that lets you plug in a hat or GPIO cable on top or a \u003ca href=\"\/products\/gpio-header-for-raspberry-pi-hat-2x20-short-female-header\"\u003eslim ultra-low-profile header.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTo make it super easy to use: we've created a custom kernel package based on Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-2-pitft-hat-320-240-primary-display-for-raspberry-pi\"\u003eOur tutorial series\u003c\/a\u003e shows you how to install the software, play small videos, or display images such as from your PiCam and more!\u003c\/p\u003e\n\u003ch3\u003eRevision History:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of July 10, 2024\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 65mm x 57mm x 6mm\u003c\/li\u003e\n\u003cli\u003eScreen Dimensions: 55mm x 40mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-2-pitft-hat-320-240-primary-display-for-raspberry-pi\/downloads\"\u003eProduct Tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130975056,"sku":"ADA2315","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-pitft-2-2-hat-mini-kit-320-x-240-2-2-tft-no-touch-adafruit-ada2315-42632942125251.jpg?v=1724828697"},{"product_id":"adafruit-16-channel-pwm-servo-hat-for-raspberry-pi","title":"Adafruit 16-Channel PWM \/ Servo HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12-bit precision, all completely free-running.\u003c\/p\u003e\n\u003cp\u003eFor use with Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3, Pi 4, or Pi 5 (any Pi with a 2 x 20 header) can be used with the Model A or B if you use a \u003ca href=\"\/products\/extra-tall-gpio-connector-for-the-raspberry-pi\"\u003etall 2 x 13 header\u003c\/a\u003e instead of the included 2 x 20.\u003c\/p\u003e\n\u003cp\u003eThe Adafruit 16-Channel 12-bit PWM\/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The onboard PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!\u003c\/p\u003e\n\u003cp\u003eWorks with any servo that can be powered by 5V and take 3.3V logic level signals.\u003c\/p\u003e\n\u003cp\u003eBest of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation come to life. The Adafruit PWM\/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Please check out our \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/\"\u003edetailed tutorial\u003c\/a\u003e for lots more information including diagrams, schematics, installation instructions, and more\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Servo HAT, a 2-pin terminal block, four 3 x 4 headers, and a 2 x 20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but it's easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2 x 20 stacking header and a set of \u003ca href=\"\/products\/3x4-right-angle-male-header-4-pack\"\u003eright-angle 3 x 4 headers\u003c\/a\u003e that should be soldered on instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note!\u003c\/strong\u003e \u003cstrong\u003eThis kit does NOT come with Raspberry Pi, servos, or a required 5V power supply.\u003c\/strong\u003e We have recommendations on the required 5-6V power supply on the tutorial page, and a \u003ca href=\"\/collections\/servos\"\u003ewhole bunch of servo options in our shop\u003c\/a\u003e, any 3-pin classic DC hobby servo will work. Also, the terminal blocks included with your product may be blue or black.\u003c\/p\u003e\n\u003ch3\u003eRevision History:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of July 10, 2024\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions with components: 65mm x 56mm x 13mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight (unsoldered HAT only): 14g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/downloads\"\u003e\u003cspan\u003eProduct Tutorial\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130976012,"sku":"ADA2327","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi-mini-kit-adafruit-ada2327-42633853206723.jpg?v=1724826176"},{"product_id":"adafruit-capacitive-touch-hat-for-raspberry-pi","title":"Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121","description":"\u003cp\u003eThis touch-able add-on HAT for \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where you may have used it before. This HAT allows you to create electronics that can react to human touch, with up to 12 individual sensors.\u003c\/p\u003e\n\u003cp\u003eThe HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables. Attach one side of the clip to the HAT and the other side to something electrically conductive (like metal) or full of water (like vegetables or fruit!) Then start up our handy Python library code to detect when the object is touched. That's pretty much it, very easy! For advanced users, you can also solder to a pad to make a slimmer \u0026amp; more permanent connection.\u003c\/p\u003e\n\u003cp\u003eWorks great with any Raspberry Pi that has a 2 x 20 connector This HAT can be used with Model A or Model B but requires the purchase\/soldering of an \u003ca href=\"\/products\/extra-tall-gpio-connector-for-the-raspberry-pi\"\u003eextra-tall 2 x 13 header\u003c\/a\u003e instead of the 2 x 20 included.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-mpr121-12-key-capacitive-touch-sensor-breakout-tutorial\/python-circuitpython\"\u003eCheck out the MPR121 sensor guide for CircuitPython and Python usage\u003c\/a\u003e!. We have examples for reading touches, turning touches into keyboard KeyUp\/KeyDown presses (so you can make a veggie keyboard) as well as an audio player that will play a sound per sensor (fruit drums!)\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Capacitive Touch HAT and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but it's easy to do with basic soldering tools like a \u003ca href=\"\/products\/antex-xs25-soldering-iron-uk-plug\"\u003esoldering iron\u003c\/a\u003e and rosin core electronics solder. You'll also likely want to pick up a \u003ca href=\"\/search?q=12+alligator+clips\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e12-pack of alligator clips\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note! This kit does NOT come with Raspberry Pi, alligator clips, \u003ca href=\"\/products\/usb-powered-speakers\"\u003espeakers,\u003c\/a\u003e or delicious fruit!\u003c\/strong\u003e However, we do have all of those in the store. Well, all except fruit - despite being called Adafruit, we do not actually sell fruit. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of July 10, 2024\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e57mm x 65mm x 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-Capacitive-Touch-HAT-PCB\" target=\"\"\u003eEagleCAD PCB files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Fritzing-Library\"\u003eAdafruit Fritzing Library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1130976480,"sku":"ADA2340","price":14.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-capacitive-touch-hat-for-raspberry-pi-mini-kit-mpr121-adafruit-ada2340-42635286511811.jpg?v=1724819522"},{"product_id":"adafruit-pitft-plus-320x240-3-2-tft-resistive-touchscreen","title":"PiTFT Plus 320 x 240 3.2\" TFT + Resistive Touchscreen","description":"\u003cp\u003eIs this not the cutest little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 3.2\" display with 320 x 240 16-bit colour pixels and a resistive touch overlay. The plate uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis design fits perfectly onto the Pi Zero, Pi5, Pi4, Pi 3, Pi 2 or Model A+, B+!\u003c\/strong\u003e (Any Pi with a 2 x 20 connector) \u003cstrong\u003eNot for use with an old Pi 1 with a 2x13 connector\u003c\/strong\u003e. This display is functionally the same as our \u003ca href=\"\/products\/adafruit-pitft-2-8-touchscreen-for-the-raspberry-pi\"\u003eclassic PiTFT 2.8\"\u003c\/a\u003e and \u003ca href=\"\/products\/adafruit-pitft-plus-assembled-320x240-2-8-tft-resistive-touchscreen\"\u003ePiTFT Plus 2.8\"\u003c\/a\u003e - same pins used, same resolution, same drivers, but is just a bit bigger. It also has 26-pin GPIO pins brought out so you can connect a \u003ca href=\"\/products\/gpio-ribbon-cable-for-raspberry-pi-model-a-and-b-26-pin\"\u003e26-pin Raspberry Pi GPIO cable\u003c\/a\u003e underneath. It's the same outline as a Pi 3 \/ 2 \/ B+ so it fits well on top of a Pi in our Raspberry Pi Enclosure base.\u003c\/p\u003e\n\u003cp\u003eThe display and touchscreen use the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there are 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button. See below for the link to get the optional tact switches, they're not included.\u003c\/p\u003e\n\u003cp\u003eUse it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although it's rather small at 320 x 240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi computer and enclosure NOT included\u003c\/strong\u003e! This display comes fully assembled, just plug it onto your Raspberry Pi and install our software to rock out. Check out our detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT (the tutorial is identical to the 2.8\" PiTFT)\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eScreen Dimensions: 50mm x 71mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePCB Dimensions: 56mm x 85mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeight with socket: 19mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 50g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-PiTFT-Plus-3.2-PCB\" target=\"\"\u003eEagleCAD PCB Files\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930051140,"sku":"ADA2616","price":43.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pitft-plus-320-x-240-3-2-tft-resistive-touchscreen-adafruit-ada2616-42635872174275.jpg?v=1724808536"},{"product_id":"adafruit-pitft-2-4-hat-mini-kit-320x240-tft-touchscreen","title":"Adafruit PiTFT 2.4\" HAT Mini Kit - 320 x 240 TFT Touchscreen","description":"\u003cp\u003eIs this not the cutest little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 2.4\" display with 320 x 240 16-bit colour pixels and a resistive touch overlay. The HAT uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt's designed to fit nicely onto the Pi Model Zero, A+, B+, Pi 2, Pi 3, Pi 4 or 5 - any Pi with a 2 x 20 connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there are 5 spots for optional \u003ca href=\"\/products\/tactile-switch-buttons-6mm-slim-x-20-pack\"\u003eslim tactile switches\u003c\/a\u003e wired to five GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eWe have a right-angle 26-pin connector off to the side. You can connect a \u003ca href=\"\/products\/gpio-ribbon-cable-for-raspberry-pi-model-a-and-b-26-pin\"\u003eclassic 26-pin Raspberry Pi GPIO cable\u003c\/a\u003e in order to access the rest of the GPIO through a \u003ca href=\"\/products\/adafruit-assembled-pi-cobbler-plus-breakout-cable\"\u003eCobbler\u003c\/a\u003e, etc.\u003c\/p\u003e\n\u003cp\u003eTo make it super easy to use: we've created a custom kernel package based on Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands.\u003c\/p\u003e\n\u003cp\u003eEach order ships with an assembled HAT with a 2.4\" TFT display with a resistive touchscreen and a 2 x 20 female socket header. Some light soldering is required to attach the header but it is easy work for anyone with a soldering iron \u0026amp; solder. Alternatively, you can use a stacking type header instead if you'd like to plug a 2 x 20 GPIO cable on top\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, Pi enclosure, 26-pin GPIO cable, and tactile switches are NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-4-pitft-hat-with-resistive-touchscreen-mini-kit\"\u003eOur tutorial series\u003c\/a\u003e shows you how to install the software, as well as calibrate the touchscreen, display videos, display images such as from your PiCam and more!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBoard Dimensions: 65mm x 57mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eScreen Dimensions: 55mm x 40mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e320 x 240 resolution, 2.4\" diagonal TFT with 16-bit colour\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-4-pitft-hat-with-resistive-touchscreen-mini-kit\/downloads\"\u003eProduct Tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930056004,"sku":"ADA2455","price":33.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-pitft-2-4-hat-mini-kit-320-x-240-tft-touchscreen-adafruit-ada2455-42636183503043.jpg?v=1724828709"},{"product_id":"adafruit-pitft-plus-assembled-320x240-2-8-tft-resistive-touchscreen","title":"PiTFT Plus Assembled 320 x 240 2.8\" TFT + Resistive Touchscreen","description":"\u003cp\u003eIs this not the cutest little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 2.8\" display with 320x240 16-bit colour pixels and a resistive touch overlay. The plate uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003eThis updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+, Pi 4 and 5! (Any Pi with a 2 x 20 connector) Not for use with an old Pi 1 with a 2 x 13 connector If you'd like to use a 2.8\" display with the original Pi A or Pi B,  check out the \u003ca href=\"\/products\/adafruit-pitft-2-8-touchscreen-for-the-raspberry-pi\"\u003eModel B\u003c\/a\u003e version. This one also has all 40-pin GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi Zero\/3\/2\/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base and can use our \u003ca href=\"\/products\/faceplate-and-buttons-pack-for-2-8-pitfts\"\u003efaceplate for a compact touchscreen Pi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe display and touchscreen use the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there are 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eUse it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although it's rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi\"\u003eCheck out our detailed tutorial\u003c\/a\u003e on how to play videos, display images, and otherwise customize your PiTFT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi computer and enclosure NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of July 10th, 2024\u003c\/strong\u003e, this display comes fully assembled and includes 4 tactile switches soldered on.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eScreen Dimensions: 50mm x 69mm x 4mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePCB Dimensions: 56mm x 85mm x 11mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 42g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi\/downloads\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930061124,"sku":"ADA2298","price":33.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pitft-plus-assembled-320-x-240-2-8-tft-resistive-touchscreen-adafruit-ada2298-42651634172099.jpg?v=1724829964"},{"product_id":"adafruit-pitft-plus-480x320-3-5-tft-touchscreen-for-raspberry-pi","title":"PiTFT Plus 480 x 320 3.5\" TFT+Touchscreen for Raspberry Pi","description":"\u003cp\u003eIs this not the cutest, little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 3.5\" display with 480 x 320 16-bit colour pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer \"2x20 connector\" Raspberry Pis. The plate uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis PiTFT 3.5\" is designed to fit nicely onto the Raspberry Pi Zero, Pi5, Pi 4, Pi 3, Pi 2 or Model A+ \/ B+ (any Pi with a 2x20 connector). Not for use with an old Pi 1 with a 2 x 13 connector.\u003c\/strong\u003e If you'd like to use a 3.5\" display with the original Pi A or Pi B, \u003ca href=\"\/products\/adafruit-pitft-assembled-480x320-3-5-tft-touchscreen-for-raspberry-pi\"\u003echeck out this version\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2 x 13 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO.\u003c\/p\u003e\n\u003cp\u003eBest of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display separately connected. Four mounting ears can be used to attach the display \u0026amp; Pi to a bezel or snap them off with pliers (they're perforated) for a slick exactly the same-size-as-a-Pi look.\u003c\/p\u003e\n\u003cp\u003eWe've created a custom kernel package based on Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi\"\u003eOur tutorial\u003c\/a\u003e shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi\/downloads\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930062980,"sku":"ADA2441","price":43.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pitft-plus-480-x-320-3-5-tft-touchscreen-for-raspberry-pi-adafruit-ada2441-42652352315587.jpg?v=1724808548"},{"product_id":"adafruit-pitft-plus-320x240-2-8-tft-capacitive-touchscreen","title":"Adafruit PiTFT Plus 320 x 240 2.8\" TFT + Capacitive Touchscreen","description":"\u003cp\u003eIs this not the cutest little display for the \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e? It features a 2.8\" display with 320 x 240 16-bit colour pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay. If you don't need a capacitive touchscreen, \u003ca href=\"\/products\/adafruit-pitft-plus-assembled-320x240-2-8-tft-resistive-touchscreen\"\u003echeck out the resistive touch version\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis updated design fits perfectly onto the Pi 5, Pi 4, Pi Zero, Pi 3, Pi 2 or Model A+, B+!\u003c\/strong\u003e (Any Pi with a 2 x 20 connector) \u003cstrong\u003eNot for use with an old Pi 1 with a 2 x 13 connector.\u003c\/strong\u003e This version also has all 40-pin GPIO pins brought out so you can connect a 40-pin GPIO cable underneath.\u003c\/p\u003e\n\u003cp\u003eThe display and touchscreen use the hardware I2C Pins (SDA \u0026amp; SCL), SPI pins (SCK, MOSI, MISO, CE0), and GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there are 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eUse it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although it's rather small at 320 x 240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-8-pitft-capacitive-touch\"\u003eCheck out our detailed tutorial\u003c\/a\u003e on how to play videos, display images, and otherwise customise your PiTFT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi computer is NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of July 11, 2024\u003c\/strong\u003e, this display comes fully assembled with tactile switches too\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScreen Dimensions: 50mm x 69mm x 4mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 56mm x 85mm x 11mm\u003c\/li\u003e\n\u003cli\u003eWeight: 47g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-8-pitft-capacitive-touch\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930065476,"sku":"ADA2423","price":43.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-pitft-plus-320-x-240-2-8-tft-capacitive-touchscreen-adafruit-ada2423-42653643604163.jpg?v=1724815736"},{"product_id":"adafruit-pi-protector-for-raspberry-pi-model-a","title":"Adafruit Pi Protector for Raspberry Pi Model A+","description":"\u003cp\u003eNow that we're carrying the pocket-sized Raspberry Pi Model A+ PaintYourDragon is back with another gorgeous laser-cut showpiece. This time he's taken a pass at a Pi Protector for Raspberry Pi Model A+, not quite a full case, it will keep your Pi A+ safe and svelte.\u003c\/p\u003e\n\u003cp\u003eKeep your \u003ca href=\"\/products\/raspberry-pi-3-model-a-plus\"\u003eRaspberry Pi® Model A+ computer\u003c\/a\u003e tidy and safe in this lovely clear acrylic enclosure. We designed this  simple protector to be beautiful, easy to assemble and perfect for any use (but especially for those who want to carry their Pi around in their pocket!) \u003cstrong\u003eThis enclosure is only compatible with the Raspberry Pi Model A+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe case is as minimal as it gets coming in just two pieces of acrylic that are secure with six screws. Made of crystal-clear acrylic, this case keeps the Pi secure. You can use all of the connectors on the edges of the Pi: HDMI, Audio\/Video, \u003ca href=\"\/products\/sandisk-microsd-card-class-10-a1\"\u003emicroSD slot\u003c\/a\u003e, micro USB power, and the USB port. There's also a cutout to allow a 40-pin IDC cable to the GPIO breakout pins on the Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product comes with two acrylic pieces and assembly hardware. Raspberry Pi A+ computer is NOT included. No other cables, connectors or accessories are included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930075524,"sku":"ADA2281","price":7.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-pi-protector-for-raspberry-pi-model-a-adafruit-ada2281-42654622908611.jpg?v=1724816100"},{"product_id":"adafruit-raspberry-pi-case-smoke-base-w-clear-top","title":"Adafruit Raspberry Pi B+ \/ Pi 2 \/ Pi 3 Case - Smoke Base - with Clear Top","description":"\u003cp\u003eIt took a while to perfect - but that's okay since we can now safely say that the Adafruit case for Raspberry Pi Model B+ \/ Pi 2 \/ Pi 3 is The Single Greatest Raspberry Pi Model B+ Case Ever.\u003c\/p\u003e\n\u003cp\u003eThis enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B.  Made of ultra-durable, super-glossy polycarbonate, it is both good-looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove bevelled slot for your \u003ca href=\"\/products\/sandisk-microsd-card-class-10-a1\"\u003eMicro SD card\u003c\/a\u003e, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi.\u003c\/p\u003e\n\u003cp\u003eThe Pi snaps into the base and the lid fits snugly onto the top.  If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease.\u003c\/p\u003e\n\u003cp\u003eThis is the basic, classic enclosure with a smoke base and a clear top.  More colours are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi B+ enclosure fun, but we'll be starting out with this very neutral grey\/clear combo.\u003c\/p\u003e\n\u003cp\u003eThis case works for Raspberry Pi Model B+ \/ Pi 2 \/ \u003ca href=\"\/products\/raspberry-pi-3-model-b\"\u003ePi 3 Model B\u003c\/a\u003e and \u003ca href=\"\/products\/raspberry-pi-3-model-b-plus\"\u003ePi 3 Model B+\u003c\/a\u003e only. \u003cstrong\u003eIt does not work for the Raspberry Pi Model A or B or the Pi 4\u003c\/strong\u003e.  It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with the Raspberry Pi 5.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Pi, cables, or Pi Camera included. This product is just the case!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere's how to insert a Raspberry Pi into our case:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/eqONp_P2ea0?si=Dn1jRnw9Gw0YTheZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCase Dimensions (without lid): 93mm x 63mm x 25mm\u003c\/li\u003e\n\u003cli\u003eLid Thickness: 4mm\u003c\/li\u003e\n\u003cli\u003eWeight: 47g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":13930087236,"sku":"ADA2258","price":7.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-raspberry-pi-b-pi-2-pi-3-case-smoke-base-with-clear-top-adafruit-ada2258-42655505383619.jpg?v=1724802248"},{"product_id":"white-7-segment-clock-display-0-56-digit-height","title":"White 7-segment clock display - 0.56\" digit height","description":"\u003cp\u003e\u003cstrong\u003eThe 4-Digit Seven-Segment Display adds bright numeric output to clocks, timers, and counters, with decimal points and centre colon dots for time-based projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign a clock, timer or counter into your next project using the pretty \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e 4-digit seven-segment display. \u003c\/p\u003e\n\u003cp\u003eThese bright crisp displays are good for adding numeric output. Besides the \u003cstrong\u003efour 7-segments\u003c\/strong\u003e, there are \u003cstrong\u003edecimal points\u003c\/strong\u003e on each digit and an extra wire for colon-dots in the centre (good for time-based projects).\u003c\/p\u003e\n\u003cp\u003eThese are \u003cstrong\u003e30mcd\u003c\/strong\u003e bright. You can drive these with less current to get the same brightness to save power, or crank them up to \u003cstrong\u003e20mA\u003c\/strong\u003e and have them at their brightest.\u003c\/p\u003e\n\u003cp\u003eThese displays are multiplexed, common-cathode. What that means it that you can use a \u003ca title=\"74HC595 Shift Register - 3 pack\" href=\"\/products\/74hc595-shift-register-3-pack\"\u003e74HC595\u003c\/a\u003e or just 8 microcontroller pins if you can spare them to control the 8 anodes (7-seg + decimal) at about\u003cstrong\u003e ~15mA \u003c\/strong\u003eeach, and then connect \u003ca title=\"NPN Bipolar Transistors (PN2222) - 10 pack\" href=\"\/products\/npn-bipolar-transistors-pn2222-10-pack\"\u003eNPN transistors\u003c\/a\u003e or a \u003cstrong\u003eTPIC6B595\u003c\/strong\u003e to the cathodes to sink the 8*15mA =\u003cstrong\u003e ~120mA\u003c\/strong\u003e maximum per digit.\u003c\/p\u003e\n\u003cp\u003eWe strongly recommend getting our \u003ca title='Adafruit 0.56\" 4-Digit 7-Segment Display w\/I2C Backpack - White' href=\"\/products\/adafruit-0-56-4-digit-7-segment-display-w-i2c-backpack-white\"\u003ebackpack version\u003c\/a\u003e, which comes with an LED driver on the back. \u003cstrong\u003eThis version is just the raw display, and requires a lot more work to get running!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4-digit seven-segment display with decimal points on each digit\u003c\/li\u003e\n\u003cli\u003eExtra centre colon-dots wire for time-based projects\u003c\/li\u003e\n\u003cli\u003e30mcd brightness for crisp, clear numeric output\u003c\/li\u003e\n\u003cli\u003eAdjustable brightness control via current regulation (up to 20mA)\u003c\/li\u003e\n\u003cli\u003eMultiplexed, common-cathode configuration\u003c\/li\u003e\n\u003cli\u003eRequires 8 microcontroller pins or 74HC595 shift register for anode control\u003c\/li\u003e\n\u003cli\u003eNPN transistors or TPIC6B595 needed for cathode control\u003c\/li\u003e\n\u003cli\u003eMaximum current draw: ~120mA per digit\u003c\/li\u003e\n\u003cli\u003eRaw display module (backpack version sold separately with integrated LED driver)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommon Cathode LED display\u003c\/li\u003e\n\u003cli\u003eDimensions: 19.3mm x 50.3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/1001datasheet.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x White 7-segment clock display - 0.56\" digit height\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739182097,"sku":"ADA1001","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/white-7-segment-clock-display-0-56-digit-height-adafruit-ada1001-1241432566.jpg?v=1780569251"},{"product_id":"adafruit-0-56-4-digit-7-segment-display-w-i2c-backpack-white","title":"Adafruit 0.56\" 4-Digit 7-Segment Display w\/I2C Backpack - White","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca href=\"\/search?q=8x8+matrix\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca href=\"\/search?q=4-digit+7-segment+display\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are \u003ca href=\"https:\/\/www.adafruit.com\/products\/453\"\u003edriver chips like the MAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavours - a \u003ca href=\"\/search?q=mini+8x8\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003emini 8x8\u003c\/a\u003e and a 4-digit 0.56\" 7-segment. They work perfectly with the matrices we stock in the shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built-in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (the images above are photographed at the dimmest setting to avoid overloading our camera!), and 1\/16 step display dimming, all via a simple I2C interface. The backpacks come with address-selection jumpers so you can connect up to four mini 8x8's or eight 7-segments (or a combination, such as four mini 8x8's and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003eThe product kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled LED backpack\u003c\/li\u003e\n\u003cli\u003eUltra-bright 4-digit 0.56\" tall white seven-segment display\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eTo get you going fast, we have revised this popular board to be the same size and pinout as before but now with two \u003ca href=\"\/collections\/qwiic-stemma-qt\" title=\"Qwiic and STEMMA QT\"\u003eSTEMMA QT\u003c\/a\u003e connectors on either side that are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the HT16K33 or to chain it with a wide range of other sensors and accessories using a \u003ca href=\"\/search?q=stemma+qt+cable\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003ecompatible cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOf course, in classic Adafruit fashion, we also have a \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\"\u003edetailed tutorial\u003c\/a\u003e showing you how to solder, wire and control the display. We even wrote a \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-LED-Backpack-Library\"\u003every nice library\u003c\/a\u003e for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eyeing matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Cable and board are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 12, 2024\u003c\/strong\u003e - This PCB has been revised to include two vertical-mount STEMMA QT connectors so that the board can be plug-and-play with STEMMA QT cables and devices!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/WtWGz16NiW8?si=KdTLW-SxtzgsZLzF\u0026amp;start=336\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eThis board\/chip uses I2C 7-bit address between 0x70-0x77, selectable with jumpers\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBackpack Dimensions: 50.0mm x 26.7mm x 6.0mm\u003c\/li\u003e\n\u003cli\u003eBackpack Weight: 5.6g\u003c\/li\u003e\n\u003cli\u003e7-Segment Display Dimensions: 19mm x 50mm x 14mm\u003c\/li\u003e\n\u003cli\u003e7-Segment Display Weight: 8.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\"\u003eProduct Tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739182161,"sku":"ADA1002","price":10.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-0-56-4-digit-7-segment-display-w-i2c-backpack-white-adafruit-ada1002-42666954326211.jpg?v=1724823839"},{"product_id":"pig-tail-cables-0-1-2-pin-4-pack","title":"Pig-Tail Cables - 0.1\" 2-pin - 4 Pack","description":"\u003cp\u003e\u003cstrong\u003eThe 2-pin 0.1″ connector cables provide a simple way to connect components to header pins, ideal for tidy wiring in projects like LED control with PWM driver boards.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou'll find these handy \u003cstrong\u003e2-pin 0.1\" spacing pig-tails\u003c\/strong\u003e to be quite helpful when wiring up your project. The connector end snaps cleanly into \u003cstrong\u003e0.1\" spaced header\u003c\/strong\u003e (and fits neatly side by side on 0.1\" spacing as well). We think this would be especially useful when paired with our \u003ca title=\"Adafruit 16-Channel 12-bit PWM\/Servo Driver - I2C interface (PCA9685)\" href=\"\/products\/adafruit-16-channel-12-bit-pwm-servo-driver-i2c-interface-pca9685\"\u003ePWM driver breakout\u003c\/a\u003e, to control \u003cstrong\u003e16 PWM LEDs\u003c\/strong\u003e that are wired, but there are probably a dozen other uses.\u003c\/p\u003e\n\u003cp\u003eCome in a pack of four cables, \u003cstrong\u003e12 inches long\u003c\/strong\u003e, each one has two contacts placed in a housing. We don't have the exact part # for the housing but it is often called a \"DuPont\" or \"Harwin M20\". \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-pin connectors with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003eSnaps cleanly into 0.1\" spaced headers\u003c\/li\u003e\n\u003cli\u003e12 inches long\u003c\/li\u003e\n\u003cli\u003ePack of 4 cables\u003c\/li\u003e\n\u003cli\u003eDuPont\/Harwin M20 style housing\u003c\/li\u003e\n\u003cli\u003eCompatible with PWM driver breakouts and LED projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDupont 0.1\" spaced connector\u003c\/li\u003e\n\u003cli\u003eCable length: approx. 12 inches\u003c\/li\u003e\n\u003cli\u003e24AWG stranded wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of May 14, 2021\u003c\/strong\u003e - these Four 2-pin 0.1\" Pig-Tail Cables are now 24AWG. The previous version cables were 26AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pig-Tail Cables - 0.1\" 2-pin - 4 Pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739182225,"sku":"ADA1003","price":2.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pig-tail-cables-0-1-2-pin-4-pack-adafruit-ada1003-1234234020.jpg?v=1777035337"},{"product_id":"colorful-round-tactile-button-switch-assortment-15-pack","title":"Colourful Round Tactile Button Switch Assortment - 15 pack","description":"\u003cp\u003e\u003cstrong\u003eThese large tactile push buttons with caps provide a simple, momentary input for electronic projects, ideal for use on PCBs or breadboards, with colourful Snap-On caps for easy identification.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eLittle \"clicky\" switches are standard input \"buttons\" on electronic projects. These work best in a \u003cstrong\u003ePCB\u003c\/strong\u003e but can be used on a \u003ca title=\"Solderless Breadboards\" href=\"\/collections\/solderless-breadboards\"\u003esolderless breadboard\u003c\/a\u003e as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.\u003c\/p\u003e\n\u003cp\u003eThese buttons are bigger than the 6mm ones we carry and come in a \u003cstrong\u003epack of 15\u003c\/strong\u003e. Each button comes with a candy-coloured round cap that snaps on. You get \u003cstrong\u003ethree of each colour-- blue, grey, yellow, green, and red\u003c\/strong\u003e. The round plastic button tops affix easily to the tactile switch body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 15 momentary tactile switches\u003c\/li\u003e\n\u003cli\u003eNormally open pins that close when pressed\u003c\/li\u003e\n\u003cli\u003eIncludes coloured Snap-On caps: 3 blue, 3 grey, 3 yellow, 3 green, 3 red\u003c\/li\u003e\n\u003cli\u003eLarger size than standard 6mm switches\u003c\/li\u003e\n\u003cli\u003eCompatible with PCB and solderless breadboards\u003c\/li\u003e\n\u003cli\u003eCandy-coloured round plastic button tops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled button dimensions: 12mm x 12mm x 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ladyada.net\/learn\/arduino\/lesson5.html\" target=\"_blank\" title=\"Tutorial\" rel=\"noopener\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/B3F-1000-Omron.pdf\" target=\"_blank\" title=\"Example Datasheet\" rel=\"noopener\"\u003eExample Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Colourful Round Tactile Button Switch Assortment - 15 pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739182609,"sku":"ADA1009","price":5.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/colourful-round-tactile-button-switch-assortment-15-pack-adafruit-ada1009-1234234014.jpg?v=1777035218"},{"product_id":"adafruit-adxl326-5v-ready-triple-axis-accelerometer-16g-analog-out","title":"ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)","description":"\u003cp\u003eWe've now got a wider range version of our favourite triple-axis accelerometer - it even has an onboard 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75\"x0.75\" breakout board.\u003c\/p\u003e\n\u003cp\u003eThe ADXL326 is the latest and greatest from Analog Devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analogue outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -16g is at 0v and 16g is at 3.3V with full scaling in between.\u003c\/p\u003e\n\u003cp\u003eFully assembled and tested. Comes with an 8-pin 0.1\" standard header in case you want to use it with a \u003ca href=\"\/collections\/solderless-breadboards\"\u003ebreadboard\u003c\/a\u003e or \u003ca href=\"\/collections\/prototyping-pcbs-and-perfboard\"\u003eperfboard\u003c\/a\u003e. Two 2mm (0.08\") mounting holes for easy attachment.\u003c\/p\u003e\n\u003cp\u003eThe XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\u003c\/p\u003e\n\u003cp\u003eSee the \u003ca href=\"http:\/\/www.analog.com\/en\/mems-sensors\/mems-inertial-sensors\/adxl326\/products\/product.html\"\u003eADXL326 webpage\u003c\/a\u003e for datasheets and more\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 12, 2024\u003c\/strong\u003e - we've updated this PCB with \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Pinguin\"\u003eAdafruit Pinguin\u003c\/a\u003e to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eDimensions (without header):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength:19mm\u003c\/li\u003e\n\u003cli\u003eWidth:19mm\u003c\/li\u003e\n\u003cli\u003eHeight:3.14mm\u003c\/li\u003e\n\u003cli\u003eWeight:1.29g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-analog-accelerometer-breakouts\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739183057,"sku":"ADA1018","price":17.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adxl326-5v-ready-triple-axis-accelerometer-16g-analog-out-adafruit-ada1018-42667156209859.jpg?v=1724828513"},{"product_id":"ir-distance-sensor-includes-cable-20cm-150cm","title":"IR distance sensor includes cable (20cm-150cm) (GP2Y0A02YK)","description":"\u003cp\u003e\u003cstrong\u003eThe Sharp IR Distance Sensor (20-150 cm) measures how far away an object is by detecting reflected infrared light and outputs an analogue voltage that can be read by a microcontroller.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis SHARP \u003cstrong\u003edistance sensor\u003c\/strong\u003e bounces IR off objects to determine how far away they are. It returns an analogue voltage that can be used to determine how close the nearest object is. Comes with \u003cstrong\u003e8\" long 3-JST interface wire\u003c\/strong\u003e. These sensors are good for detection between \u003cstrong\u003e20cm-150cm\u003c\/strong\u003e. For over \u003cstrong\u003e1m\u003c\/strong\u003e distance, we suggest using sonar \u003ca href=\"\/collections\/adafruit-sensors\" title=\"Sensors\"\u003esensors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo use\u003c\/strong\u003e, connect black wire to ground, red wire to \u003cstrong\u003e5V\u003c\/strong\u003e and white wire to analogue input. The analogue voltage out will range from \u003cstrong\u003e3V\u003c\/strong\u003e when an object is only 8\" (20 cm) away and \u003cstrong\u003e0.4V\u003c\/strong\u003e when the object is 60\" (150 cm) away.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSHARP infrared distance sensor with analogue voltage output\u003c\/li\u003e\n\u003cli\u003eDetection range: 20cm to 150cm\u003c\/li\u003e\n\u003cli\u003e3V output at 20cm, 0.4V output at 150cm\u003c\/li\u003e\n\u003cli\u003eIncludes 8\" (20cm) 3-JST interface wire\u003c\/li\u003e\n\u003cli\u003eConnect to 5V power supply and analogue input pin\u003c\/li\u003e\n\u003cli\u003eIdeal for object detection and proximity sensing\u003c\/li\u003e\n\u003cli\u003eFor distances over 1m, sonar sensors recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 21.66mm\u003c\/li\u003e\n\u003cli\u003eWidth: 44.39mm\u003c\/li\u003e\n\u003cli\u003eHeight: 18.67mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.06g without cable\/7.88g with cable\u003c\/li\u003e\n\u003cli\u003eScrew holes are 37mm apart - 3.2.mm diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"GP2Y0A02YK Datasheet\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1031\/GP2Y0A02YK-DATA-SHEET.PDF\" target=\"_blank\"\u003eGP2Y0A02YK Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x IR distance sensor includes cable (20cm-150cm) (GP2Y0A02YK)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739184145,"sku":"ADA1031","price":15.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/ir-distance-sensor-includes-cable-20cm-150cm-gp2y0a02yk-adafruit-ada1031-1234234009.jpg?v=1777034977"},{"product_id":"adafruit-l3gd20h-triple-axis-gyro-breakout-board-l3gd20-l3g4200-upgrade","title":"L3GD20H Triple-Axis Gyro Breakout Board - L3GD20\/L3G4200 Upgrade (L3GD20H)","description":"\u003cp\u003eA gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an \u003ca href=\"\/collections\/accelerometers\"\u003eaccelerometer\u003c\/a\u003e, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object is moving!) As these sensors become more popular and easier to manufacture, the prices for them have dropped to the point where you can easily afford a triple-axis gyro! Only a decade ago, this space-tech sensor would have been hundreds of dollars.\u003c\/p\u003e\n\u003cp\u003eThis breakout board is based on the latest gyro technology, the L3GD20H from STMicro. It's the upgrade to the L3G4200 (\u003ca href=\"http:\/\/www.st.com\/internet\/analog\/product\/252443.jsp\"\u003esee this app note on what to look for if upgrading an existing design to the L3GD20\u003c\/a\u003e) with three full axes of sensing. The chip can be set to ±250, ±500, or ±2000 degree-per-second scale for a large range of sensitivity. There's also built-in high and low pass sensing to make data processing easier. The chip supports both I2C and SPI so you can interface with any microcontroller easily.\u003c\/p\u003e\n\u003cp\u003eSince this chip is a 3.3V max device, but many of our customers want to use it with an Arduino, we soldered it to a breakout board with level-shifting circuitry so you can use the I2C or SPI interface safely using a 5V interface device. We also place a 3.3V regulator on there so you can power it from 5V.\u003c\/p\u003e\n\u003cp\u003eSince we expect people will want to attach it firmly to their project, the PCB comes with four 2.1mm mounting holes. Use #2-56 imperial or M2 screws screws.\u003c\/p\u003e\n\u003cp\u003eGetting started is easy - simply connect SDA to your Arduino I2C data pin (On the UNO this is A4), SCL to I2C clock (Uno: A5), GND to ground, and Vin to 3 or 5VDC. Then install and run our easy-to-use \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_L3GD20\"\u003eArduino library\u003c\/a\u003e, which will print out the XYZ sensor data to the serial terminal. Our library also supports SPI on any 4 digital I\/O pins, see the example for wiring.\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of June 12, 2024\u003c\/strong\u003e – We updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen; you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eDimensions (without header):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 30.65mm\u003c\/li\u003e\n\u003cli\u003eWidth: 19.11mm\u003c\/li\u003e\n\u003cli\u003eHeight: 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.02g\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 0x6B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-triple-axis-gyro-breakout\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739184209,"sku":"ADA1032","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/l3gd20h-triple-axis-gyro-breakout-board-l3gd20-l3g4200-upgrade-l3gd20h-adafruit-ada1032-42667422056643.jpg?v=1724811246"},{"product_id":"small-1-2-8x8-ultra-bright-yellow-green-led-matrix","title":"Small 1.2\" 8x8 Ultra Bright Yellow-Green LED Matrix (KWM-30881CUGB)","description":"\u003cp\u003e\u003cstrong\u003eThe 8x8 yellow-green LED matrix is a compact display for scrolling signs, icons, animations, or small visual indicators, with 0.1″ spaced pins for breadboard-friendly wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eMake a scrolling sign, or a small video display with this \u003cstrong\u003e8x8 gridded yellow-green LED matrix\u003c\/strong\u003e. Only \u003cstrong\u003e1.2\"\u003c\/strong\u003e on a side, it is quite visible but not so large it wont plug into a breadboard! There are \u003cstrong\u003e16 pins\u003c\/strong\u003e on the side, 8 on each, with \u003cstrong\u003e0.1\" spacing\u003c\/strong\u003e so you can easily plug it into a breadboard with one row on each side for wiring it up.\u003c\/p\u003e\n\u003cp\u003eSince the display is in a grid, you'll need to \u003cstrong\u003e1:8 multiplex\u003c\/strong\u003e control it. We suggest either using a \u003ca href=\"\/products\/74hc595-shift-register-3-pack\" title=\"74HC595 Shift Register - 3 pack\"\u003e74HC595\u003c\/a\u003e and TPIC6B595 (using the 74HC' to control the 8 anodes at once and then using the TPIC' to drive one cathode at a time) or just using a single \u003ca href=\"\/products\/max7219cng-plus-led-and-8-digit-display-driver\" title=\"MAX7219CNG+ LED \u0026amp; 8-Digit Display Driver\"\u003eMAX7219\u003c\/a\u003e which will do the multiplexing work for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8x8 yellow-green LED matrix display\u003c\/li\u003e\n\u003cli\u003e1.2\" (30mm) square size - visible yet breadboard-compatible\u003c\/li\u003e\n\u003cli\u003e16 pins total with 0.1\" spacing for easy breadboard integration\u003c\/li\u003e\n\u003cli\u003e8 pins per side for convenient dual-row wiring\u003c\/li\u003e\n\u003cli\u003eRequires 1:8 multiplexing control\u003c\/li\u003e\n\u003cli\u003eCompatible with 74HC595 and TPIC6B595 driver combination\u003c\/li\u003e\n\u003cli\u003eCompatible with MAX7219 driver IC\u003c\/li\u003e\n\u003cli\u003eSuitable for scrolling text and video displays\u003c\/li\u003e\n\u003cli\u003eGrid layout for customisable LED patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 9.1g\u003c\/li\u003e\n\u003cli\u003eThis is a Common Cathode LED Matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/KWM-30881XUGB.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/playground.arduino.cc\/\" target=\"_blank\" title=\"The Arduino Playground\" rel=\"noopener\"\u003eThe Arduino playground has a nice set of tutorials introducing the MAX7219 and 8x8 LED matrices\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/fabienroyer.wordpress.com\/2010\/12\/03\/driving-an-8x8-led-matrix-with-a-netduino-using-persistence-of-vision\/\" target=\"_blank\" title=\"Fabiens bit bucket\" rel=\"noopener\"\u003eUsing a high power shift register to drive 8x8 matrices with a NETduino\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Small 1.2\" 8x8 Ultra Bright Yellow-Green LED Matrix (KWM-30881CUGB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739186257,"sku":"ADA1045","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/small-1-2-8x8-ultra-bright-yellow-green-led-matrix-kwm-30881cugb-adafruit-ada1045-1234254333.jpg?v=1777042149"},{"product_id":"small-1-2-8x8-ultra-bright-yellow-orange-led-matrix","title":"8x8 Ultra Bright Yellow-Orange LED Matrix (KWM-30881CUYB) (Small 1.2\")","description":"\u003cp\u003e\u003cstrong\u003eThe 8x8 Yellow-Orange LED Matrix is a compact, breadboard-friendly display for scrolling signs, simple animations, and small video-style projects, with standard 0.1\" pin spacing for easy wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eMake a scrolling sign, or a small video display with this \u003ca href=\"\/collections\/adafruit\" title=\"Adafruit Products\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003e8x8 gridded yellow-orange LED matrix. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly\u003cstrong\u003e 1.2\"\u003c\/strong\u003e on a side, it is quite visible but not so large it won't plug into a breadboard! There are \u003cstrong\u003e16 pins\u003c\/strong\u003e on the side, 8 on each, with \u003cstrong\u003e0.1\"\u003c\/strong\u003e spacing so you can easily plug it into a breadboard with one row on each side for wiring it up.\u003c\/p\u003e\n\u003cp\u003eSince the display is in a grid, you'll need to \u003cstrong\u003e1:8 multiplex\u003c\/strong\u003e to control it. We suggest either using a \u003ca href=\"\/products\/74hc595-shift-register-3-pack\" title=\"74HC595 Shift Register - 3 pack\"\u003e74HC595\u003c\/a\u003e and \u003cstrong\u003eTPIC6B595\u003c\/strong\u003e (using the 74HC' to control the 8 anodes at once and then using the TPIC' to drive one cathode at a time) or just using a single \u003ca href=\"\/products\/max7219cng-plus-led-and-8-digit-display-driver\" title=\"MAX7219\"\u003eMAX7219\u003c\/a\u003e which will do the multiplexing work for you.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"http:\/\/www.arduino.cc\/playground\/Main\/LEDMatrix\" title=\"Arduino playground\" rel=\"noopener\" target=\"_blank\"\u003eArduino playground\u003c\/a\u003e has a nice set of tutorials introducing the MAX7219 and 8x8 LED matrices.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8x8 LED matrix display with yellow-orange LEDs\u003c\/li\u003e\n\u003cli\u003e1.2\" square compact size\u003c\/li\u003e\n\u003cli\u003eBreadboard-compatible with 16 pins (8 per side)\u003c\/li\u003e\n\u003cli\u003e0.1\" pin spacing for easy soldering and connections\u003c\/li\u003e\n\u003cli\u003eRequires 1:8 multiplexing control\u003c\/li\u003e\n\u003cli\u003eCompatible with 74HC595 and TPIC6B595 shift registers\u003c\/li\u003e\n\u003cli\u003eCompatible with MAX7219 LED driver IC\u003c\/li\u003e\n\u003cli\u003eSuitable for scrolling text and video displays\u003c\/li\u003e\n\u003cli\u003eArduino-compatible with available tutorials\u003c\/li\u003e\n\u003cli\u003eThis is a common Cathode LED Matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/KWM-30881XUYB.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.arduino.cc\/playground\/Main\/LEDMatrix\" target=\"_blank\" title=\"Arduino playground\" rel=\"noopener\"\u003eArduino playground\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/fabienroyer.wordpress.com\/2010\/12\/03\/driving-an-8x8-led-matrix-with-a-netduino-using-persistence-of-vision\/\" target=\"_blank\" title=\"Tutorial\" rel=\"noopener\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Small 1.2\" 8x8 Ultra Bright Yellow-Orange LED Matrix\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739186321,"sku":"ADA1046","price":4.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/8x8-ultra-bright-yellow-orange-led-matrix-kwm-30881cuyb-small-1-2-adafruit-ada1046-1241231504.jpg?v=1780412232"},{"product_id":"small-1-2-8x8-ultra-bright-blue-led-matrix","title":"Small 1.2\" 8x8 Ultra Bright Blue LED Matrix (KWM-30881CBB)","description":"\u003cp\u003e\u003cstrong\u003eThe 8×8 Blue LED Matrix is a bright, breadboard-friendly display for scrolling text, simple animations, and compact visual interfaces, with 64 blue LEDs arranged in an easy-to-drive 8×8 grid.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eMake a scrolling sign, or a small video display with this \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003e8x8 gridded blue LED matrix\u003c\/strong\u003e. Only \u003cstrong\u003e1.2\"\u003c\/strong\u003e on a side, it is quite visible but not so large it wont plug into a breadboard!\u003c\/p\u003e\n\u003cp\u003eThere are \u003cstrong\u003e16 pins\u003c\/strong\u003e on the side, 8 on each, with \u003cstrong\u003e0.1\" spacing \u003c\/strong\u003eso you can easily plug it into a breadboard with one row on each side for wiring it up.\u003c\/p\u003e\n\u003cp\u003eSince the display is in a grid, you'll need to \u003cstrong\u003e1:8 multiplex\u003c\/strong\u003e to control it. We suggest either using a \u003ca title=\"74HC595 Shift Register - 3 pack\" href=\"\/products\/74hc595-shift-register-3-pack\"\u003e74HC595\u003c\/a\u003e and \u003cstrong\u003eTPIC6B595 \u003c\/strong\u003e(using the 74HC' to control the 8 anodes at once and then using the TPIC' to drive one cathode at a time) or just using a single \u003ca title=\"MAX7219CNG+ LED \u0026amp; 8-Digit Display Driver\" href=\"\/products\/max7219cng-plus-led-and-8-digit-display-driver\"\u003eMAX7219\u003c\/a\u003e which will do the multiplexing work for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Breadboard is not included. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8x8 gridded blue LED matrix display\u003c\/li\u003e\n\u003cli\u003eCompact 1.2\" square size\u003c\/li\u003e\n\u003cli\u003eBreadboard compatible with 16 pins (8 pins per side)\u003c\/li\u003e\n\u003cli\u003e0.1\" pin spacing for easy integration\u003c\/li\u003e\n\u003cli\u003eRequires 1:8 multiplexing for control\u003c\/li\u003e\n\u003cli\u003eCompatible with 74HC595 and TPIC6B595 shift register configuration\u003c\/li\u003e\n\u003cli\u003eCompatible with MAX7219 driver IC\u003c\/li\u003e\n\u003cli\u003eSuitable for scrolling text and video display applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/1047datasheet.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.arduino.cc\/playground\/Main\/LEDMatrix\" target=\"_blank\" title=\"Arduino playground\" rel=\"noopener\"\u003eArduino playground\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/fabienroyer.wordpress.com\/2010\/12\/03\/driving-an-8x8-led-matrix-with-a-netduino-using-persistence-of-vision\/\" target=\"_blank\" title=\"Learn\" rel=\"noopener\"\u003eLearn\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Small 1.2\" 8x8 Ultra Bright Blue LED Matrix (KWM-30881CBB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Breadboard is not included. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739186449,"sku":"ADA1047","price":7.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/small-1-2-8x8-ultra-bright-blue-led-matrix-kwm-30881cbb-adafruit-ada1047-1241347915.jpg?v=1780491011"},{"product_id":"adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-red","title":"Adafruit Small 1.2\" 8x8 LED Matrix with I2C Backpack - Red","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca href=\"\/search?q=8x8+matrix\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca href=\"\/search?q=4-digit+7-segment+display\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the \u003ca href=\"https:\/\/www.adafruit.com\/products\/453\"\u003eMAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these lovely LED matrix backpacks come in. We have them in three flavors - a mini 0.7\" 8x8, a small \u003ca href='\/search?q=1.2\"+8x8\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e1.2\" 8x8\u003c\/a\u003e and a \u003ca href='\/search?q=4-digit+0.56\"+7-segment\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e4-digit 0.56\" 7-segment\u003c\/a\u003e. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (the images above are photographed at the dimmest setting to avoid overloading our camera!), and 1\/16 step display dimming, all via a simple I2C interface. These 1.2\" matrix backpacks come with three address-selection jumpers so you can connect up to eight 1.2\" 8x8s together (or a combination, such as four 1.2\" 8x8s and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003eThe product kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled 1.2\" LED backpack\u003c\/li\u003e\n\u003cli\u003eUltra-bright 1.2\" 8x8 red matrix\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eOf course, in classic Adafruit fashion, we also have a \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\"\u003edetailed tutorial\u003c\/a\u003e showing you how to solder, wire and control the display. We even wrote a very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eying matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of June 12, 2024\u003c\/strong\u003e - We've updated this PCB to have \u003ca href=\"\/search?q=stemma+qt+cable\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003eStemma QT connectors\u003c\/a\u003e on the I2C lines for plug-and-play usage. We've also updated it with Adafruit Pinguin to make a lovely and legible silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x70-0x77, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739189905,"sku":"ADA1049","price":9.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-red-adafruit-ada1049-42667822973123.jpg?v=1724826362"},{"product_id":"adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-yellow","title":"Adafruit Small 1.2\" 8x8 LED Matrix with I2C Backpack - Yellow","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca title=\"LED Matrices\" href=\"\/collections\/led-matrices\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca title=\"Segment Displays\" href=\"\/collections\/segment-displays\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the \u003ca title=\"MAX7219CNG+ LED \u0026amp; 8-Digit Display Driver\" href=\"\/products\/max7219cng-plus-led-and-8-digit-display-driver\"\u003eMAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space.\u003c\/p\u003e\n\u003cp\u003eHere at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these lovely LED matrix backpacks come in.\u003c\/p\u003e\n\u003cp\u003eWe have them in three flavours - a mini 0.7\" 8x8, a small 1.2\" 8x8 and a 4-digit 0.56\" 7-segment. They work perfectly with the matrices we stock in the shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built-in clock, so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (the images above are photographed at the dimmest setting to avoid overloading our camera!), and 1\/16 step display dimming, all via a simple I2C interface. These 1.2\" matrix backpacks come with three address-selection jumpers so you can connect up to eight 1.2\" 8x8s together (or a combination, such as four 1.2\" 8x8s and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe product kit comes with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled 1.2\" LED backpack\u003c\/li\u003e\n\u003cli\u003e\u003ca title='Small 1.2\" 8x8 Ultra Bright Yellow-Orange LED Matrix (KWM-30881CUYB)' href=\"\/products\/small-1-2-8x8-ultra-bright-yellow-orange-led-matrix\"\u003eUltra-bright 1.2\" 8x8 yellow\/orange matrix\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eThis board\/chip uses I2C 7-bit addresses between 0x70-0x77, selectable with jumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOf course, in classic Adafruit fashion, \u003c\/span\u003e\u003ca rel=\"noopener\" title=\"Adafruit LED Backpacks\" href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\" target=\"_blank\"\u003ewe also have a detailed tutorial showing you how to solder, wire and control the display\u003c\/a\u003e\u003cspan\u003e. We even wrote \u003c\/span\u003e\u003ca rel=\"noopener\" title=\"Adafruit-LED-Backpack-Library\" href=\"https:\/\/github.com\/adafruit\/Adafruit-LED-Backpack-Library\" target=\"_blank\"\u003ea very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment\u003c\/a\u003e\u003cspan\u003e. If you've been eying matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-rf0tDP_exg?si=mD_TUc_OXfPaeocg\u0026amp;start=321\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Adafruit LED Backpack tutorial\" href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/overview\" target=\"_blank\"\u003eAdafruit LED Backpacks Tutorial\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\" href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\" target=\"_blank\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of October 30, 2024\u003c\/strong\u003e – We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen, and with \u003ca title=\"Qwiic and STEMMA QT\" href=\"\/collections\/qwiic-stemma-qt\"\u003eSparkFun Qwiic compatible STEMMA QT\u003c\/a\u003e connectors for the I2C bus, so you don't even need to solder the I2C and power lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739190033,"sku":"ADA1050","price":10.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-small-1-2-8x8-led-matrix-with-i2c-backpack-yellow-adafruit-ada1050-1161513783.jpg?v=1746730886"},{"product_id":"adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-yellow-green","title":"Adafruit Small 1.2\" 8x8 LED Matrix with I2C Backpack - Yellow-Green","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca href=\"\/search?q=8x8+matrix\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca href=\"\/search?q=4-digit+7-segment+display\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the \u003ca href=\"https:\/\/www.adafruit.com\/products\/453\"\u003eMAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these lovely LED matrix backpacks come in. We have them in three flavors - a mini 0.7\" 8x8, a small \u003ca href='\/search?q=1.2\"+8x8\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e1.2\" 8x8\u003c\/a\u003e and a \u003ca href='\/search?q=4-digit+0.56\"+7-segment\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e4-digit 0.56\" 7-segment\u003c\/a\u003e. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built-in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (the images above are photographed at the dimmest setting to avoid overloading our camera!), and 1\/16 step display dimming, all via a simple I2C interface. These 1.2\" matrix backpacks come with three address-selection jumpers so you can connect up to eight 1.2\" 8x8s together (or a combination, such as four 1.2\" 8x8s and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003eThe product kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled 1.2\" LED backpack\u003c\/li\u003e\n\u003cli\u003eUltra-bright 1.2\" 8x8 yellow-green matrix\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eOf course, in classic Adafruit fashion, we also have a \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\"\u003edetailed tutorial\u003c\/a\u003e showing you how to solder, wire and control the display. We even wrote a very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eying matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x70-0x77, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739190097,"sku":"ADA1051","price":10.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-yellow-green-adafruit-ada1051-42667996610755.jpg?v=1724822580"},{"product_id":"adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-blue","title":"Adafruit Small 1.2\" 8x8 LED Matrix with I2C Backpack - Blue","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca href=\"\/search?q=8x8+matrix\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca href=\"\/search?q=4-digit+7-segment+display\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the \u003ca href=\"https:\/\/www.adafruit.com\/products\/453\"\u003eMAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these lovely LED matrix backpacks come in. We have them in three flavors - a mini 0.7\" 8x8, a small \u003ca href='\/search?q=1.2\"+8x8\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e1.2\" 8x8\u003c\/a\u003e and a \u003ca href='\/search?q=4-digit+0.56\"+7-segment\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e4-digit 0.56\" 7-segment\u003c\/a\u003e. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built-in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (the images above are photographed at the dimmest setting to avoid overloading our camera!), and 1\/16 step display dimming, all via a simple I2C interface. These 1.2\" matrix backpacks come with three address-selection jumpers so you can connect up to eight 1.2\" 8x8s together (or a combination, such as four 1.2\" 8x8s and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003eThe product kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled 1.2\" LED backpack\u003c\/li\u003e\n\u003cli\u003eUltra-bright 1.2\" 8x8 Blue matrix\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eOf course, in classic Adafruit fashion, we also have a \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\"\u003edetailed tutorial\u003c\/a\u003e showing you how to solder, wire and control the display. We even wrote a very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eying matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x70-0x77, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739190225,"sku":"ADA1052","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-small-1-2-8x8-led-matrix-w-i2c-backpack-blue-adafruit-ada1052-42668043010243.jpg?v=1724826185"},{"product_id":"adjustable-laser-mounting-stand","title":"Adjustable Laser Mounting Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Adjustable Laser Mount provides a simple way to securely position compatible laser diode modules, with adjustable tilt and a slotted mounting plate for easy installation on robots, workbenches, and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eUse this nice adjustable laser mount to attach any of our \u003cstrong\u003elaser diode modules\u003c\/strong\u003e to your desk, robot, shark, etc. A set-screw holds the laser in place. You can then \u003cstrong\u003eadjust the tilt\u003c\/strong\u003e. Has a flat mounting plate with two slots for easy attachment and adjustment.\u003c\/p\u003e\n\u003cp\u003eWe also sell the fixed stand here: \u003ca href=\"\/products\/fixed-laser-mounting-stand\" title=\"Fixed Laser Mounting Stand\"\u003eFixed Laser Mounting Stand\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that the laser is not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable laser mount for laser diode modules\u003c\/li\u003e\n\u003cli\u003eSet-screw secures laser in place\u003c\/li\u003e\n\u003cli\u003eTilt adjustment capability\u003c\/li\u003e\n\u003cli\u003eFlat mounting plate with two slots\u003c\/li\u003e\n\u003cli\u003eEasy attachment and adjustment\u003c\/li\u003e\n\u003cli\u003eLaser module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 61.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adjustable Laser Mounting Stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739190417,"sku":"ADA1055","price":8.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adjustable-laser-mounting-stand-adafruit-ada1055-1241231497.jpg?v=1780412110"},{"product_id":"ttl-laser-diode-5mw-650nm-red-50khz-max","title":"TTL Laser Diode - 5mW 650nm Red - 50KHz Max","description":"\u003cp\u003e\u003cstrong\u003eThe Modulated Red Laser Diode Module delivers a 650nm laser beam with external on\/off control, making it ideal for laser light shows, trip-wire sensors, optical communications, and robotics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou have some frickin' sharks at your lair, and you're thinking \"it would be really great if I could attach some lasers to them\" and then you see these little laser diode modules: what great timing! \u003c\/p\u003e\n\u003cp\u003eThese encapsulated laser diodes are \u003cstrong\u003eClass IIIa 5mW\u003c\/strong\u003e, with a \u003cstrong\u003e650nm\u003c\/strong\u003e red wavelength. They can be driven from \u003cstrong\u003e4.8V to 5.2V\u003c\/strong\u003e so they're great for your embedded electronics project.\u003c\/p\u003e\n\u003cp\u003eThis module in particular is designed to be modulated\/pulsed via the yellow wire. So you can use these for laser light shows, laser harps, 'wireless' communications and data transmission, electronic 'trip wires', laser-vision guidance, and more! Simply connect \u003cstrong\u003e5V\u003c\/strong\u003e power to the red and black wires, and pull the yellow wire to \u003cstrong\u003e5V\u003c\/strong\u003e or ground to turn on and off, respectively. You will be lasing in no time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003ethis is not a laser pointer. It's a diode with integrated driver. You still need a \u003ca href=\"\/products\/mean-well-5v-4a-20w-power-supply-gst25a05-p1j\" title=\"Mean Well 5V 4A 20W Power Supply (GST25A05-P1J)\"\u003e5VDC power supply\u003c\/a\u003e. These diodes are \u003cstrong\u003e5mW\u003c\/strong\u003e output, and have a safety label marked on them. For more information on laser safety and ratings check out the \u003ca rel=\"noopener\" title=\"Wikipedia page\" href=\"http:\/\/en.wikipedia.org\/wiki\/Laser_safety\" target=\"_blank\"\u003eWikipedia page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClass IIIa 5mW red laser diode module\u003c\/li\u003e\n\u003cli\u003e650nm wavelength\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 4.8V to 5.2V\u003c\/li\u003e\n\u003cli\u003eIntegrated driver circuit\u003c\/li\u003e\n\u003cli\u003eModulation\/pulsing capability via control wire\u003c\/li\u003e\n\u003cli\u003eSuitable for laser shows, communications, data transmission, and electronic trip wires\u003c\/li\u003e\n\u003cli\u003eThree-wire connection: power (red), ground (black), modulation (yellow)\u003c\/li\u003e\n\u003cli\u003eRequires external 5VDC power supply\u003c\/li\u003e\n\u003cli\u003eIncludes safety label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 11.85g\u003c\/li\u003e\n\u003cli\u003eDiameter: 10.11mm\u003c\/li\u003e\n\u003cli\u003eLength: 32.82mm\u003c\/li\u003e\n\u003cli\u003eWire length: 100mm\u003c\/li\u003e\n\u003cli\u003e650nm wavelength\u003c\/li\u003e\n\u003cli\u003e4.8 - 5.2V DC voltage input\u003c\/li\u003e\n\u003cli\u003e35mA max current draw\u003c\/li\u003e\n\u003cli\u003eMax TTL frequency: 50KHz\u003c\/li\u003e\n\u003cli\u003eOperating temperature -10°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1056\/1056-ds.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x TTL Laser Diode - 5mW 650nm Red - 50KHz Max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739190481,"sku":"ADA1056","price":19.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/ttl-laser-diode-5mw-650nm-red-50khz-max-adafruit-ada1056-1241339227.jpg?v=1780483992"},{"product_id":"line-laser-diode-5mw-650nm-red","title":"Line Laser Diode - 5mW 650nm Red","description":"\u003cp\u003e\u003cstrong\u003eThe Red Laser Line Diode Module projects a wide 120° laser line, making it ideal for 3D scanning, alignment, positioning, and sensing applications in embedded electronics and robotics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou have some frickin' sharks at your lair, and you're thinking \"it would be really great if I could attach some lasers to them\" and then you see these little laser diode modules: what great timing!\u003c\/p\u003e\n\u003cp\u003eThese encapsulated laser diodes are \u003cstrong\u003eClass IIIa 5mW\u003c\/strong\u003e, with a \u003cstrong\u003e650nm\u003c\/strong\u003e red wavelength. They can be driven from\u003cstrong\u003e 2.8V to 5.2V\u003c\/strong\u003e so they're great for your embedded electronics project.\u003c\/p\u003e\n\u003cp\u003eThis particular laser diode has a lens attached to turn the dot into a line. We think this would be particularly good for making a 3D scanner, but there are probably many other cool uses! Simply connect power to the red and black wires and you will be lasing in no time.\u003c\/p\u003e\n\u003cp\u003eThe line beam spread is \u003cstrong\u003e120°\u003c\/strong\u003e - so from a distance of \u003cstrong\u003e5cm\u003c\/strong\u003e the line is \u003cstrong\u003e15cm\u003c\/strong\u003e long. The line fades out and doesn't have a sharp cut-off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this is not a laser pointer. It's a diode with integrated driver. You still need a \u003ca title=\"Mean Well 5V 4A 20W Power Supply (GST25A05-P1J)\" href=\"\/products\/mean-well-5v-4a-20w-power-supply-gst25a05-p1j\"\u003e3 to 5VDC\u003c\/a\u003e power supply. These diodes are \u003cstrong\u003e5mW\u003c\/strong\u003e output, and have a safety label marked on them.\u003c\/p\u003e\n\u003cp\u003eFor more information on laser safety and ratings check out the \u003ca rel=\"noopener\" title=\"Wikipedia page\" href=\"http:\/\/en.wikipedia.org\/wiki\/Laser_safety\" target=\"_blank\"\u003eWikipedia page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClass IIIa 5mW laser diode module\u003c\/li\u003e\n\u003cli\u003e650nm red wavelength\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 2.8V to 5.2V DC\u003c\/li\u003e\n\u003cli\u003eIntegrated line-generating lens\u003c\/li\u003e\n\u003cli\u003e120° line beam spread\u003c\/li\u003e\n\u003cli\u003ePre-wired with red and black leads for easy connection\u003c\/li\u003e\n\u003cli\u003eSuitable for 3D scanning and embedded electronics projects\u003c\/li\u003e\n\u003cli\u003eIntegrated driver circuitry\u003c\/li\u003e\n\u003cli\u003eSafety label included\u003c\/li\u003e\n\u003cli\u003eLine output fades gradually without sharp cut-off\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 11.85g\u003c\/li\u003e\n\u003cli\u003eDiameter: 10.11mm\u003c\/li\u003e\n\u003cli\u003eLength: 32.82mm\u003c\/li\u003e\n\u003cli\u003eWire length: 100mm\u003c\/li\u003e\n\u003cli\u003e650nm wavelength\u003c\/li\u003e\n\u003cli\u003e2.8 - 5.2V DC voltage input\u003c\/li\u003e\n\u003cli\u003e25mA max current draw\u003c\/li\u003e\n\u003cli\u003eOperating temperature -10°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAs of Oct 29, 2023 The mechanical configuration has changed: there used to be a separate lens part screwed on, now the lens is integrated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Line Laser Diode - 5mW 650nm Red\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739191633,"sku":"ADA1057","price":8.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/line-laser-diode-5mw-650nm-red-adafruit-ada1057-1241249572.jpg?v=1780419433"},{"product_id":"cross-laser-diode-5mw-650nm-red","title":"Cross Laser Diode - 5mW 650nm Red","description":"\u003cp\u003e\u003cstrong\u003eThe Red Laser Cross Diode Module projects a clearly defined cross-shaped laser pattern, making it ideal for alignment, targeting, machine vision, and positioning applications in robotics and embedded projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou have some frickin' sharks at your lair, and you're thinking \"it would be really great if I could attach some lasers to them\" and then you see these little laser diode modules: what great timing!\u003c\/p\u003e\n\u003cp\u003eThese encapsulated laser diodes are\u003cstrong\u003e Class IIIa 5mW\u003c\/strong\u003e, with a\u003cstrong\u003e 650nm\u003c\/strong\u003e red wavelength. They can be driven from \u003cstrong\u003e2.8V to 5.2V\u003c\/strong\u003e so they're great for your embedded electronics project.\u003c\/p\u003e\n\u003cp\u003eThis particular module has a lens attached that will turn the dot into a cross. This makes it particularly good for laser-vision guidance, targeting, and more! Simply connect power to the red and black wires and you will be lasing in no time.\u003c\/p\u003e\n\u003cp\u003eThe cross has a beam spread of approximately \u003cstrong\u003e60°\u003c\/strong\u003e in both directions. So from a distance of \u003cstrong\u003e5cm\u003c\/strong\u003e, the cross is\u003cstrong\u003e 5cm tall and 5cm wide\u003c\/strong\u003e. The cross ends have a sharp cut-off so the shape is very clearly defined.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this is not a laser pointer. It's a diode with integrated driver. You still need a \u003ca title=\"Mean Well 5V 4A 20W Power Supply (GST25A05-P1J)\" href=\"\/products\/mean-well-5v-4a-20w-power-supply-gst25a05-p1j\"\u003e3 to 5VDC power supply\u003c\/a\u003e. These diodes are \u003cstrong\u003e5mW\u003c\/strong\u003e output, and have a safety label marked on them. For more information on laser safety and ratings check out the \u003ca rel=\"noopener\" title=\"Wikipedia page\" href=\"http:\/\/en.wikipedia.org\/wiki\/Laser_safety\" target=\"_blank\"\u003eWikipedia page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClass IIIa 5mW red laser diode module\u003c\/li\u003e\n\u003cli\u003e650nm red wavelength\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 2.8V to 5.2V DC\u003c\/li\u003e\n\u003cli\u003eCross-pattern lens attachment for targeting and alignment\u003c\/li\u003e\n\u003cli\u003e60° beam spread in both directions\u003c\/li\u003e\n\u003cli\u003eSharp, clearly defined cross pattern\u003c\/li\u003e\n\u003cli\u003eIntegrated driver circuit\u003c\/li\u003e\n\u003cli\u003eSimple two-wire connection (red and black)\u003c\/li\u003e\n\u003cli\u003eSuitable for embedded electronics projects\u003c\/li\u003e\n\u003cli\u003eIncludes laser safety label\u003c\/li\u003e\n\u003cli\u003eRequires external 3-5VDC power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 11.85g\u003c\/li\u003e\n\u003cli\u003eDiameter: 10.11mm\u003c\/li\u003e\n\u003cli\u003eLength: 32.82mm\u003c\/li\u003e\n\u003cli\u003eWire length: 100mm\u003c\/li\u003e\n\u003cli\u003e650nm wavelength\u003c\/li\u003e\n\u003cli\u003e2.8 - 5.2V DC voltage input\u003c\/li\u003e\n\u003cli\u003e25mA max current draw\u003c\/li\u003e\n\u003cli\u003eOperating temperature -10°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Cross Laser Diode - 5mW 650nm Red\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739192081,"sku":"ADA1058","price":8.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/cross-laser-diode-5mw-650nm-red-adafruit-ada1058-1241339223.jpg?v=1780483871"},{"product_id":"adafruit-electret-microphone-amplifier-max4466-with-adjustable-gain","title":"Electret Microphone Amplifier - MAX4466 with Adjustable Gain","description":"\u003cp\u003eAdd an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!\u003c\/p\u003e\n\u003cp\u003eThis breakout is best used for projects such as voice changers, audio recording\/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6\" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds get loud, the output can go up to 5Vpp!\u003c\/p\u003e\n\u003cp\u003eUsing it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the \"quietest\" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC\/2 so when it's perfectly quiet, the voltage will be a steady VCC\/2 volt (it is DC coupled). If the audio equipment you're using requires AC-coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.\u003c\/p\u003e\n\u003cp\u003eThe output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (\u003ca href=\"\/products\/adafruit-stereo-3-7w-class-d-audio-amplifier-max98306\"\u003esuch as our 3.7W stereo amp\u003c\/a\u003e) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.\u003c\/p\u003e\n\u003cp\u003eFor audio-reactive Arduino projects, we suggest using an FFT driver library (\u003ca href=\"http:\/\/learn.adafruit.com\/piccolo\"\u003esuch as the one in this library\u003c\/a\u003e) which can take the audio input and 'translate' it into frequencies. Also, check out this awesome \u003ca href=\"http:\/\/learn.adafruit.com\/wave-shield-voice-changer\"\u003eVoice Changer project\u003c\/a\u003e that uses this mic and an Adafruit Wave Shield!\u003c\/p\u003e\n\u003cp\u003eIf you're using with CircuitPython, this \u003ca href=\"https:\/\/learn.adafruit.com\/sound-reactive-neopixel-peace-pendant\/circuitpython-code\"\u003eaudio-reactive pendant project\u003c\/a\u003e is pretty easy and works great with any CircuitPython board.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePCB thickness - 1.60mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMeasurement including the Microphone - 7.8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-MAX4466-Electret-Mic-Amplifier-PCBs\"\u003eEagleCAD PCB files on GitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/MAX4465-MAX4469.pdf\"\u003eMAX4466 Low-Noise Microphone Amp Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/CMA-4544PF-W.pdf\"\u003eElectret Capsule Microphone Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/adafruit\/Fritzing-Library\"\u003eFritzing object in Fritzing library\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739195601,"sku":"ADA1063","price":6.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/electret-microphone-amplifier-max4466-with-adjustable-gain-adafruit-ada1063-42668316786883.jpg?v=1724814113"},{"product_id":"electret-microphone-20hz-20khz-omnidirectional","title":"Electret Microphone - 20Hz-20KHz Omnidirectional","description":"\u003cp\u003e\u003cstrong\u003eThe Electret Microphone Capsule is a compact omnidirectional microphone with a 20Hz–20kHz frequency response, making it ideal for audio sensing, sound detection, recording, and voice-reactive electronics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis electret capsule microphone is the same one we use in our great \u003ca href=\"\/products\/adafruit-electret-microphone-amplifier-max4466-with-adjustable-gain\" title=\"Electret Microphone Amplifier - MAX4466 with Adjustable Gain\"\u003emicrophone amplifier board\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIt contains a small vibrating element that will output a few millivolts peak-to-peak. You will need an op-amp to amplify the signal, some chips are designed with the amplifier built-in in which case you can wire it up directly.\u003c\/p\u003e\n\u003cp\u003eThis is an \"omnidirectional\" microphone, with \u003cstrong\u003e-44dB sensitivity\u003c\/strong\u003e, and has \u003cstrong\u003e20-20KHz\u003c\/strong\u003e frequency response. You can plug it into a \u003ca href=\"\/collections\/solderless-breadboards\" title=\"Solderless Breadboards\"\u003ebreadboard\u003c\/a\u003e or \u003ca href=\"\/collections\/prototyping-pcbs-and-perfboard\" title=\"Prototyping PCBs and Perfboard\"\u003eperfboard\u003c\/a\u003e or solder wires to the little wires sticking out the back.\u003c\/p\u003e\n\u003cp\u003eCheck out OpenMusicLab's great \u003ca href=\"http:\/\/www.openmusiclabs.com\/learning\/sensors\/electret-microphones\/\" title=\"Tutorial\" rel=\"noopener\" target=\"_blank\"\u003etutorial\u003c\/a\u003e on Electret Microphones for a deeper look at how these sensors work. \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElectret capsule microphone with built-in vibrating element\u003c\/li\u003e\n\u003cli\u003eOutputs a few millivolts peak-to-peak\u003c\/li\u003e\n\u003cli\u003eOmnidirectional pickup pattern\u003c\/li\u003e\n\u003cli\u003e-44dB sensitivity\u003c\/li\u003e\n\u003cli\u003e20-20kHz frequency response\u003c\/li\u003e\n\u003cli\u003eRequires op-amp amplification (or use with pre-amplified boards)\u003c\/li\u003e\n\u003cli\u003eCompatible with breadboard and perfboard\u003c\/li\u003e\n\u003cli\u003eSolderable wire connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/CMA-4544PF-W.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Electret Microphone - 20Hz-20KHz Omnidirectional\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739195665,"sku":"ADA1064","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/electret-microphone-20hz-20khz-omnidirectional-adafruit-ada1064-1241347910.jpg?v=1780490857"},{"product_id":"short-flex-sensor","title":"Short Flex Sensor","description":"\u003cp\u003e\u003cstrong\u003eThe Flex Sensor changes resistance as it bends, making it ideal for motion sensing, wearable projects, robotics, and gesture-based interfaces where detecting flex or movement is required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.\u003c\/p\u003e\n\u003cp\u003eThese sensors are easy to use, they are basically \u003ca href=\"\/collections\/resistors\" title=\"Resistors\"\u003eresistors\u003c\/a\u003e that change value based on how much they are flexed. If they're unflexed, the resistance is about \u003cstrong\u003e~25KΩ\u003c\/strong\u003e. When flexed all the way the resistance rises to \u003cstrong\u003e~100KΩ\u003c\/strong\u003e. They're pretty similar to FSRs so following this \u003ca rel=\"noopener\" title=\"Tutorial\" href=\"http:\/\/learn.adafruit.com\/force-sensitive-resistor-fsr\" target=\"_blank\"\u003etutorial\u003c\/a\u003e will get you started. You can use an analogue input on a micro-controller (with a pullup resistor) or a digital input with the use of a \u003cstrong\u003e0.1uF\u003c\/strong\u003e capacitor for RC timing.\u003c\/p\u003e\n\u003cp\u003eThe bottom part of the sensor (where the pins are crimped on) is very delicate so make sure to have strain relief - such as clamping or gluing that part so as not to rip out the contacts!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDetects flexing or bending in one direction\u003c\/li\u003e\n\u003cli\u003eResistance ranges from approximately 25kΩ when unflexed to 100kΩ when fully flexed\u003c\/li\u003e\n\u003cli\u003eFunctions as a variable resistor that changes value based on flex intensity\u003c\/li\u003e\n\u003cli\u003eCompatible with analogue microcontroller inputs using a pull-up resistor\u003c\/li\u003e\n\u003cli\u003eCompatible with digital inputs using a 0.1µF capacitor for RC timing\u003c\/li\u003e\n\u003cli\u003eRequires strain relief on the crimped pin connection to prevent contact damage\u003c\/li\u003e\n\u003cli\u003eOriginally popularised by Nintendo PowerGlove gaming interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 77.57mm\u003c\/li\u003e\n\u003cli\u003eWidth: 6.41mm\u003c\/li\u003e\n\u003cli\u003eThickness: 0.48mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.27g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/SpectraFlex2inch.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Short Flex Sensor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739199569,"sku":"ADA1070","price":7.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/short-flex-sensor-adafruit-ada1070-1241347913.jpg?v=1780490801"},{"product_id":"configurable-spring-terminal-blocks-3-pin-0-1-pitch-r-a-x-5","title":"Configurable Spring Terminal Blocks - 3 Pin 0.1\" Pitch R\/A - Pack of 5","description":"\u003cp\u003e\u003cstrong\u003eThe Spring Terminal Blocks (Right Angle, 3-Pin, Pack of 5) provide a quick, solder-free way to connect wires to your projects, with reconfigurable snap-together sections and secure spring-loaded terminals for 20–26 AWG wire.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSpring terminal blocks\u003c\/strong\u003e will simplify your wiring and make your project more rugged.\u003c\/p\u003e\n\u003cp\u003eInstead of \u003ca title=\"Soldering Supplies\" href=\"\/collections\/soldering-supplies\"\u003esoldering\u003c\/a\u003e wires to your perf board, solder in these \u003cstrong\u003e0.1\" \u003c\/strong\u003epitch terminal blocks. There's a little spring contact so you can pull back on the plastic bit and slip in your \u003cstrong\u003e20 to 26 AWG\u003c\/strong\u003e solid or stranded-core wires. Each terminal block is electrically isolated from those next to it. Each block also has two solder pins per contact for strong mechanical strength when soldering in place.\u003c\/p\u003e\n\u003cp\u003eThese are the\u003cstrong\u003e \"right angle\"\u003c\/strong\u003e style - the wires go in from the side.\u003c\/p\u003e\n\u003cp\u003eWhat we like about these terminal blocks is that they are re-configurable! The pack comes in a set of 5 pieces of 3-pin blocks. However, by carefully removing the end cap on each one you can snap together any number and then reattach the end cap. So you could use this to have\u003cstrong\u003e 5 x 3 pin contacts, or 1 x 15 pin contact, or 3 x 5 pin contacts\u003c\/strong\u003e, etc. Keep these around in your toolkit, and arrange them as needed!\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003ca title=\"Solderless Breadboards\" href=\"\/collections\/solderless-breadboards\"\u003ebreadboard\u003c\/a\u003e is not included. \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.1\" pitch terminal blocks for perf board soldering\u003c\/li\u003e\n\u003cli\u003eSpring contacts for secure 20-26 AWG solid or stranded-core wire insertion\u003c\/li\u003e\n\u003cli\u003eRight-angle design with side wire entry\u003c\/li\u003e\n\u003cli\u003eElectrically isolated individual contacts\u003c\/li\u003e\n\u003cli\u003eDual solder pins per contact for strong mechanical strength\u003c\/li\u003e\n\u003cli\u003eReconfigurable - snap blocks together for custom pin counts\u003c\/li\u003e\n\u003cli\u003eSet of 5 x 3-pin blocks included\u003c\/li\u003e\n\u003cli\u003eSimplifies wiring without soldering individual wires\u003c\/li\u003e\n\u003cli\u003eRugged construction for robust projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 1.73g each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/19898.pdf\" target=\"_blank\" title=\"Product datasheet\" rel=\"noopener\"\u003eProduct datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Configurable Spring Terminal Blocks - 3 Pin 0.1\" Pitch R\/A - Pack of 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739199761,"sku":"ADA1074","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/configurable-spring-terminal-blocks-3-pin-0-1-pitch-r-a-pack-of-5-adafruit-ada1074-1241249576.jpg?v=1780419315"},{"product_id":"miniature-ultra-bright-8x8-white-led-matrix","title":"Miniature Ultra-Bright 8x8 White LED Matrix","description":"\u003cp\u003e\u003cstrong\u003eThe Mini 8×8 White LED Matrix packs 64 bright LEDs into a compact 0.8\" square display, making it ideal for icons, animations, scrolling text, and space-constrained breadboard projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou will squeak with delight when you hold this adorable \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003eminiature LED matrix. 0.8\" square\u003c\/strong\u003e, its got everything a big LED matrix has, but bite-sized!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e64 bright white LEDs\u003c\/strong\u003e are contained inside the plastic body, in an\u003cstrong\u003e 8x8 matrix\u003c\/strong\u003e. There are 16 pins on the side, 8 on each, with \u003cstrong\u003e0.1\"\u003c\/strong\u003e spacing so you can easily plug it into a breadboard with plenty of space to wire it up\u003c\/p\u003e\n\u003cp\u003eSince the display is in a grid, you'll need to \u003cstrong\u003e1:8 multiplex\u003c\/strong\u003e to control it. We suggest either using a \u003ca title=\"74HC595 Shift Register - 3 pack\" href=\"\/products\/74hc595-shift-register-3-pack\"\u003e74HC595\u003c\/a\u003e and \u003cstrong\u003eTPIC6B595\u003c\/strong\u003e (using the 74HC' to control the 8 anodes at once and then using the TPIC' to drive one cathode at a time) or just using a single \u003ca title=\"MAX7219CNG+ LED \u0026amp; 8-Digit Display Driver\" href=\"\/products\/max7219cng-plus-led-and-8-digit-display-driver\"\u003eMAX7219\u003c\/a\u003e which will do the multiplexing work for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eBreadboard and wires not included. \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.8\" square miniature LED matrix display\u003c\/li\u003e\n\u003cli\u003e64 bright white LEDs in 8x8 matrix configuration\u003c\/li\u003e\n\u003cli\u003e16 pins total (8 pins each side) with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003eCompatible with breadboard integration\u003c\/li\u003e\n\u003cli\u003eRequires 1:8 multiplexing control\u003c\/li\u003e\n\u003cli\u003eCompatible with 74HC595 and TPIC6B595 shift registers\u003c\/li\u003e\n\u003cli\u003eCompatible with MAX7219 LED driver IC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/1079datasheet.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.arduino.cc\/playground\/Main\/LEDMatrix\" target=\"_blank\" title=\"Arduino playground\" rel=\"noopener\"\u003eArduino playground\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/fabienroyer.wordpress.com\/2010\/12\/03\/driving-an-8x8-led-matrix-with-a-netduino-using-persistence-of-vision\/\" target=\"_blank\" title=\"Learn\" rel=\"noopener\"\u003eLearn\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Miniature Ultra-Bright 8x8 White LED Matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Breadboard and wires not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739200593,"sku":"ADA1079","price":7.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/miniature-ultra-bright-8x8-white-led-matrix-adafruit-ada1079-1241339218.jpg?v=1780483750"},{"product_id":"adafruit-mini-8x8-led-matrix-w-i2c-backpack-ultra-bright-white","title":"Adafruit Mini 8x8 LED Matrix with I2C Backpack - Ultra Bright White","description":"\u003cp\u003eWhat's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an \u003ca href=\"\/search?q=8x8+matrix\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e8x8 matrix\u003c\/a\u003e or a \u003ca href=\"\/search?q=4-digit+7-segment+display\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003e4-digit 7-segment display\u003c\/a\u003e. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the \u003ca href=\"https:\/\/www.adafruit.com\/products\/453\"\u003eMAX7219\u003c\/a\u003e that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit, we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavours - a \u003ca href=\"\/search?q=8x8+mini\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003emini 8x8\u003c\/a\u003e and a \u003ca href='\/search?q=4-digit+0.56\"+7-segment\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1'\u003e4-digit 0.56\" 7-segment\u003c\/a\u003e. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.\u003c\/p\u003e\n\u003cp\u003eThe matrices use a driver chip that does all the heavy lifting for you: They have a built-in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent colour (\u003cstrong\u003ethe images above are photographed at the dimmest setting to avoid overloading our camera!\u003c\/strong\u003e), and 1\/16 step display dimming, all via a simple I2C interface. The backpacks come with address-selection jumpers so you can connect up to four mini 8x8's or eight 7-segments (or a combination, such as four mini 8x8's and four 7-segments, etc) on a single I2C bus.\u003c\/p\u003e\n\u003cp\u003eThe product kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA fully tested and assembled LED backpack\u003c\/li\u003e\n\u003cli\u003eUltra-bright 8x8 white matrix\u003c\/li\u003e\n\u003cli\u003e4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA bit of soldering is required to attach the matrix onto the backpack but it's very easy to do and only takes about 5 minutes.\u003c\/p\u003e\n\u003cp\u003eOf course, in classic Adafruit fashion, we also have a \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-led-backpack\/\"\u003edetailed tutorial\u003c\/a\u003e showing you how to solder, wire and control the display. We even wrote a \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit-LED-Backpack-Library\"\u003every nice library\u003c\/a\u003e for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eyeing matrix displays but hesitated because of the complexity, this is the solution you've been looking for!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Breadboard and cables are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x70-0x73, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBackpack Dimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20mm x 28mm x 4mm\u003c\/li\u003e\n\u003cli\u003eMounting Holes: 12mm x 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\" data-mce-href=\"https:\/\/learn.adafruit.com\/adafruit-led-backpack\/downloads\"\u003eTutorial and Downloads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739200721,"sku":"ADA1080","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-mini-8x8-led-matrix-with-i2c-backpack-ultra-bright-white-adafruit-ada1080-1161513779.jpg?v=1746730873"},{"product_id":"mechanical-decade-counters-large-size-pack-of-5","title":"Mechanical Decade Counters - Large Size - Pack of 5","description":"\u003cp\u003e\u003cstrong\u003eThe Mechanical Decade Counters (5 Pack) provide a satisfying tactile interface with snap-together modular counters, up\/down buttons, and PCB outputs for each digit, making them ideal for custom controls, counters, and interactive electronics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eClick click click - oh pardon me I was having fun clicking away on my \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003eMechanical Decade Counter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach order comes with\u003cstrong\u003e five individual counters\u003c\/strong\u003e. They snap together so you can connect as many or as few as you'd like. Each one has two buttons - an up counter and down counter. Once you get to 9 it circles back to zero.\u003c\/p\u003e\n\u003cp\u003eOn the back is a PCB with \u003cstrong\u003e11 contacts\u003c\/strong\u003e - one common and then 10 that are shorted to the common one by one as the counter goes by that number.\u003c\/p\u003e\n\u003cp\u003eThese make for an interesting interface! This one is the larger size with a bezel size \u003cstrong\u003e1.3\" x 2.44\"\u003c\/strong\u003e (for 5 counters with 2 end caps)\u003c\/p\u003e\n\u003cp\u003eWe also stock the smaller version here: \u003ca title=\"Mechanical Decade Counters - Small Size - Pack of 5\" href=\"\/products\/mechanical-decade-counters-small-size-pack-of-5\"\u003eMechanical Decade Counters - Small Size - Pack of 5\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/T5oZlidU3QE?si=JViUdQTJiIiOI4K3\u0026amp;start=333\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePack of five mechanical decade counters\u003c\/li\u003e\n\u003cli\u003eSnap-together design for flexible configuration\u003c\/li\u003e\n\u003cli\u003eUp and down counter buttons on each unit\u003c\/li\u003e\n\u003cli\u003eAuto-reset from 9 to 0\u003c\/li\u003e\n\u003cli\u003ePCB contacts with 11-point switching (1 common + 10 individual)\u003c\/li\u003e\n\u003cli\u003eLarge bezel size: 1.3\" x 2.44\" (assembled with end caps)\u003c\/li\u003e\n\u003cli\u003eTactile mechanical clicking interface\u003c\/li\u003e\n\u003cli\u003eSuitable for interactive projects and installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBezel size 1.3\" x 2.44\"(for 5 counters with 2 end caps)\u003c\/li\u003e\n\u003cli\u003eMounting hole size 1.2\" x 2.33\" (for 5 counters with 2 end caps)\u003c\/li\u003e\n\u003cli\u003eTotal depth (from front of button to the edge of the PCB) 1.91\"\u003c\/li\u003e\n\u003cli\u003eSingle counter width .39\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Mechanical Decade Counters - Large Size - Pack of 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739201105,"sku":"ADA1082","price":7.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/mechanical-decade-counters-large-size-pack-of-5-adafruit-ada1082-1241225398.jpg?v=1780404431"},{"product_id":"adafruit-ads1015-12-bit-adc-4-channel-with-programmable-gain-amplifier","title":"ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT \/ Qwiic","description":"\u003cp\u003eFor microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples\/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and it's super easy to use. It is a great general purpose 12 bit converter.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eComes with a bit of 0.1\" standard header in case you want to use it with a \u003ca href=\"\/collections\/solderless-breadboards\"\u003ebreadboard\u003c\/a\u003e or \u003ca href=\"\/collections\/prototyping-pcbs-and-perfboard\"\u003eperfboard\u003c\/a\u003e. Four mounting holes for easy attachment. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo get you going fast, we spun up a custom-made PCB in the STEMMA QT form factor, making it easy to interface with. The \u003ca href=\"\/collections\/qwiic-stemma-qt\" title=\"Qwiic and STEMMA QT\"\u003eSTEMMA QT connectors\u003c\/a\u003e on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the ADS1015 or to chain it with a wide range of other sensors and accessories using a \u003ca href=\"\/search?q=stemma+qt+cable\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003ecompatible cable\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eQT Cable is not included, but we have a variety in the \u003ca href=\"\/search?q=stemma+qt+cable\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003eshop\u003c\/a\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe have \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\"\u003eexample code\u003c\/a\u003e for both the Raspberry Pi, Arduino and CircuitPython. Simply connect GND to ground, VDD to your logic power supply, and SCL\/SDA to your microcontroller's I2C port and run the example code to start reading data.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\/\"\u003edetailed guide\u003c\/a\u003e will get you started with wiring diagrams, example code for Arduino \u0026amp; CircuitPython, datasheets, and more!\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of the 21st September, 2023\u003c\/strong\u003e - we've updated this breakout to be STEMMA QT compatible - that means there's now an easy way to plug-and-play this device without any soldering! The physical shape and pinout have changed a little but overall functionality is identical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/xjULP0p9XGU?si=ZtM_V4nBnxU4_LLV\u0026amp;start=194\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide Supply Range: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eLow Current Consumption: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down\u003c\/li\u003e\n\u003cli\u003eProgrammable Data Rate: 128SPS to 3.3kSPS\u003c\/li\u003e\n\u003cli\u003eInternal Low-Drift Voltage Reference\u003c\/li\u003e\n\u003cli\u003eInternal Oscillator\u003c\/li\u003e\n\u003cli\u003eInternal PGA\u003c\/li\u003e\n\u003cli\u003eI2C Interface: Pin-Selectable Addresses\u003c\/li\u003e\n\u003cli\u003eFour Single-Ended or Two Differential Inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable Comparator\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct Dimensions: 25.4mm x 17.8mm x 4.6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct Weight: 1.8g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\/downloads\"\u003eDatasheets\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739201233,"sku":"ADA1083","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/ads1015-12-bit-adc-4-channel-with-programmable-gain-amplifier-stemma-qt-qwiic-adafruit-ada1083-40935454867651.jpg?v=1695305837"},{"product_id":"mechanical-decade-counters-small-size-pack-of-5","title":"Mechanical Decade Counters - Small Size - Pack of 5","description":"\u003cp\u003e\u003cstrong\u003eThe Mechanical Decade Counters (Small, 5 Pack) offer a compact, tactile counting interface with snap-together modules, up\/down controls, and PCB digit outputs, making them ideal for custom counters, control panels, and interactive electronics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eClick click click - oh pardon me I was having fun clicking away on my \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003eMechanical Decade Counter\u003c\/strong\u003e. Each order comes with five individual counters. They're snap together so you can connect as many or as few as you'd like.\u003c\/p\u003e\n\u003cp\u003eEach pack comes with \u003cstrong\u003efive individual counters.\u003c\/strong\u003e They have two buttons - an up counter and down counter. Once you get to 9 it circles back to zero. On the back is a PCB with \u003cstrong\u003e11 contacts\u003c\/strong\u003e - one common and then 10 that are shorted to the common one by one as the counter goes by that number.\u003c\/p\u003e\n\u003cp\u003eThese make for an interesting interface! This one is the smaller size with a bezel size of \u003cstrong\u003e1.85\" x 0.94\"\u003c\/strong\u003e (for 5 counters with 2 end caps)\u003c\/p\u003e\n\u003cp\u003eWe also stock the larger version here: \u003ca href=\"\/products\/mechanical-decade-counters-large-size-pack-of-5\" title=\"Mechanical Decade Counters - Large Size - Pack of 5\"\u003eMechanical Decade Counters - Large Size - Pack of 5\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/T5oZlidU3QE?si=Y0zdAyO6UKvtnCr7\u0026amp;start=333\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePack of five individual mechanical decade counters\u003c\/li\u003e\n\u003cli\u003eSnap-together design for flexible configuration\u003c\/li\u003e\n\u003cli\u003eTwo buttons per counter: up and down\u003c\/li\u003e\n\u003cli\u003eCounts from 0-9 with automatic wraparound\u003c\/li\u003e\n\u003cli\u003ePCB with 11 contacts on rear (1 common + 10 sequential)\u003c\/li\u003e\n\u003cli\u003eContacts short to common as counter advances through each number\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBezel size 1.85\" x 0.94\" (for 5 counters with 2 end caps)\u003c\/li\u003e\n\u003cli\u003eMounting hole size 1.8\" x 0.875\" (for 5 counters with 2 end caps)\u003c\/li\u003e\n\u003cli\u003eTotal depth (from front of button to the edge of the PCB) 1.6\"\u003c\/li\u003e\n\u003cli\u003eSingle counter width 0.32\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Mechanical Decade Counters - Small Size - Pack of 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739203217,"sku":"ADA1084","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/mechanical-decade-counters-small-size-pack-of-5-adafruit-ada1084-1241231508.jpg?v=1780411899"},{"product_id":"adafruit-ads1115-16-bit-adc-4-channel-with-programmable-gain-amplifier","title":"ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT \/ Qwiic","description":"\u003cp\u003eFor microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples\/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and is super easy to use. It is a great general-purpose 16-bit converter.\u003c\/p\u003e\n\u003cp\u003eThe chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115s connected on a single 2-wire I2C bus for 16 single-ended inputs.\u003c\/p\u003e\n\u003cp\u003eComes with a bit of a 0.1\" standard header in case you want to use it with a \u003ca href=\"\/collections\/solderless-breadboards\"\u003ebreadboard\u003c\/a\u003e or \u003ca href=\"\/collections\/prototyping-pcbs-and-perfboard\"\u003eperfboard\u003c\/a\u003e.  Four mounting holes for easy attachment. \u003c\/p\u003e\n\u003cp\u003eTo get you going fast, we spun up a custom-made PCB in the STEMMA QT form factor, making it easy to interface with. The \u003ca href=\"\/collections\/qwiic-stemma-qt\" title=\"Qwiic and STEMMA QT\"\u003eSTEMMA QT\u003c\/a\u003e connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the ADS1115 or to chain it with a wide range of other sensors and accessories using a compatible cable.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/search?q=stemma+qt+cable\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003eQT Cable is not included, but we have a variety in the shop\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe have an \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\"\u003eexample code for both the Raspberry Pi, Arduino, and CircuitPython\u003c\/a\u003e. Simply connect GND to ground, VDD to your logic power supply, and SCL\/SDA to your microcontroller's I2C port and run the example code to start reading data.\u003c\/p\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\/\"\u003edetailed guide\u003c\/a\u003e will get you started with wiring diagrams, example code for Arduino \u0026amp; CircuitPython, datasheets, and more!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of July 12, 2024\u003c\/b\u003e – we've updated this PCB with \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Pinguin\"\u003eAdafruit Pinguin\u003c\/a\u003e to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 22, 2022 \u003c\/strong\u003e- we've updated this breakout to be STEMMA QT compatible - which means there's now an easy way to plug and play this device without any soldering! The physical shape and pinout have changed a little but overall functionality is identical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xjULP0p9XGU?si=UgbfgX3WUJ5_LFfO\u0026amp;start=194\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide Supply Range: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eLow Current Consumption: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down\u003c\/li\u003e\n\u003cli\u003eProgrammable Data Rate: 8SPS to 860SPS\u003c\/li\u003e\n\u003cli\u003eInternal Low-Drift Voltage Reference\u003c\/li\u003e\n\u003cli\u003eInternal Oscillator\u003c\/li\u003e\n\u003cli\u003eInternal PGA\u003c\/li\u003e\n\u003cli\u003eI2C Interface: Pin-Selectable Addresses\u003c\/li\u003e\n\u003cli\u003eFour Single-Ended or Two Differential Inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable Comparator\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 25.4mm x 17.8mm x 4.6mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 1.8g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-4-channel-adc-breakouts\/downloads\"\u003e\u003cspan\u003eTutorial and Downloads\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739204689,"sku":"ADA1085","price":14.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/ads1115-16-bit-adc-4-channel-with-programmable-gain-amplifier-stemma-qt-qwiic-adafruit-ada1085-42669037289667.jpg?v=1724826716"},{"product_id":"conductive-fiber-stainless-steel-20um-10-grams","title":"Conductive Fibre - Stainless Steel 20um - 10 grams","description":"\u003cp\u003e\u003cstrong\u003eThe Conductive Felting Fibre (10g) lets you create touch-sensitive buttons, interactive textiles, and pressure sensors, making it ideal for wearable electronics, felted controllers, and capacitive touch projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis \u003cstrong\u003econductive fibre\u003c\/strong\u003e is super interesting! It's great for \u003cstrong\u003efelting\u003c\/strong\u003e and could also be spun into yarn if that's your thing.\u003c\/p\u003e\n\u003cp\u003eWe tested many different fibre thicknesses for needle felting and found that this one (\u003cstrong\u003e20um fibre thickness\u003c\/strong\u003e) is the most pleasurable to work with. Use about\u003cstrong\u003e 0.2g\u003c\/strong\u003e of the stuff to make a felt touch button suitable for use with the \u003cstrong\u003eMaKey MaKey\u003c\/strong\u003e or \u003cstrong\u003ecapacitive touch sensing circuit\u003c\/strong\u003e. Make felt controllers or felt buttons onto an existing wool sweater!\u003c\/p\u003e\n\u003cp\u003eYou can also make a squeeze\/pressure sensor with this fibre, as it becomes less resistive the more you squeeze the fibres together. Make sure to combine this fibre with a natural animal fibre (which have \"scales\") for best results. We think \u003cstrong\u003e10g\u003c\/strong\u003e is the perfect amount and will get you through several projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaKey MaKey and alligator clips not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/SlfvQyEQgIc?si=QyiUE_8-hBa8QhFe\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20µm fibre thickness optimised for needle felting\u003c\/li\u003e\n\u003cli\u003eConductive fibre suitable for felting and spinning into yarn\u003c\/li\u003e\n\u003cli\u003e0.2g creates a felt touch button for capacitive touch sensing circuits\u003c\/li\u003e\n\u003cli\u003eCompatible with MaKey MaKey and similar touch-sensing applications\u003c\/li\u003e\n\u003cli\u003eCreate felt controllers or buttons directly onto wool garments\u003c\/li\u003e\n\u003cli\u003eFunctions as a pressure\/squeeze sensor with variable resistance\u003c\/li\u003e\n\u003cli\u003eResistance decreases with increased compression\u003c\/li\u003e\n\u003cli\u003eWorks best when combined with natural animal fibres\u003c\/li\u003e\n\u003cli\u003e10g quantity suitable for multiple projects\u003c\/li\u003e\n\u003cli\u003eMaKey MaKey and alligator clips sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Conductive Fibre - Stainless Steel 20um - 10 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaKey MaKey and alligator clips not included!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739205137,"sku":"ADA1088","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/conductive-fibre-stainless-steel-20um-10-grams-adafruit-ada1088-1241249588.jpg?v=1780419161"},{"product_id":"adafruit-flora-gps-starter-pack","title":"FLORA GPS Starter Pack","description":"\u003cp\u003e\u003cspan\u003eGet started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location data logging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high-quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or TV-B-Gone!): NPN transistors, long-range IR LEDs, and matching resistors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe guarantee lots of safe sewing fun!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: You may get a FLORA with an off-white or black JST connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAs of July 12th, 2024\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Flora GPS Starter Pack now includes v2 of the FLORA\u003c\/li\u003e\n\u003cli\u003eThis pack comes with the Flora GPS module using the MTK3333 chipset which can use multiple GNSS constellations and is a little thicker. Other than that it works the same.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible\" data-mce-href=\"https:\/\/thepihut.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible\"\u003eFLORA main board\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-flora-wearable-ultimate-gps-module\" data-mce-href=\"https:\/\/thepihut.com\/products\/adafruit-flora-wearable-ultimate-gps-module\"\u003eFlora Wearable Ultimate GPS module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-flora-rgb-smart-neopixel-version-2-pack-of-4\" data-mce-href=\"https:\/\/thepihut.com\/products\/adafruit-flora-rgb-smart-neopixel-version-2-pack-of-4\"\u003eEight Flora RGB NeoPixels V2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/3-x-aaa-battery-holder-with-on-off-switch-and-2-pin-jst\" data-mce-href=\"https:\/\/thepihut.com\/products\/3-x-aaa-battery-holder-with-on-off-switch-and-2-pin-jst\"\u003e3xAAA Battery holder with JST connector and on\/off switch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/stainless-thin-conductive-thread-2-ply-23-meter-76-ft\" data-mce-href=\"https:\/\/thepihut.com\/products\/stainless-thin-conductive-thread-2-ply-23-meter-76-ft\"\u003eStainless Thin Conductive Thread - 2 ply - 25 meter\/85 ft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/stainless-medium-conductive-thread-3-ply-18-meter-60-ft\" data-mce-href=\"https:\/\/thepihut.com\/products\/stainless-medium-conductive-thread-3-ply-18-meter-60-ft\"\u003eStainless Medium Conductive Thread - 3 ply - 18 meter\/60 ft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNeedle set with 20 pieces\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/small-alligator-clip-test-lead-set-of-12\" data-mce-href=\"https:\/\/thepihut.com\/products\/small-alligator-clip-test-lead-set-of-12\"\u003eSmall Alligator Clip Test Lead (set of 12)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/usb-to-micro-usb-cable-0-5m\" data-mce-href=\"\/products\/usb-to-micro-usb-cable-0-5m\"\u003eUSB cable - A\/MicroB - 3ft\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e4x \u003ca href=\"https:\/\/thepihut.com\/products\/alkaline-aaa-batteries-2-pack\" data-mce-href=\"https:\/\/thepihut.com\/products\/alkaline-aaa-batteries-2-pack\"\u003eAlkaline AAA batteries\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/thepihut.com\/products\/npn-bipolar-transistors-pn2222-10-pack\" data-mce-href=\"https:\/\/thepihut.com\/products\/npn-bipolar-transistors-pn2222-10-pack\"\u003eNPN Bipolar Transistors (PN2222)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/thepihut.com\/products\/super-bright-5mm-ir-led\" data-mce-href=\"https:\/\/thepihut.com\/products\/super-bright-5mm-ir-led\"\u003eSuper-bright 5mm IR LEDs\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x 100-ohm resistors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eHead to the Adafruit Learning System for the following FLORA tutorials:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/getting-started-with-flora\" data-mce-href=\"https:\/\/learn.adafruit.com\/getting-started-with-flora\"\u003eGetting started with FLORA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/flora-rgb-smart-pixels\" data-mce-href=\"https:\/\/learn.adafruit.com\/flora-rgb-smart-pixels\"\u003eFlora RGB Smart Pixels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/flora-wearable-gps\" data-mce-href=\"https:\/\/learn.adafruit.com\/flora-wearable-gps\"\u003eFlora Wearab\u003c\/a\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/flora-wearable-gps\"\u003el\u003c\/a\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/flora-wearable-gps\" data-mce-href=\"https:\/\/learn.adafruit.com\/flora-wearable-gps\"\u003ee GPS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739207377,"sku":"ADA1090","price":86.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/flora-gps-starter-pack-adafruit-ada1090-42696573255875.jpg?v=1724813229"},{"product_id":"tactile-on-off-switch-with-leads","title":"Tactile On\/Off Switch with Leads","description":"\u003cp\u003e\u003cstrong\u003eThe Adafruit clicky switch is a satisfying squeeze-to-toggle switch that’s ideal for wearable and fabric projects, providing simple on\/off or mode control with support for up to 14V and 2A.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eSqueeze once to turn on, squeeze again to turn off! This \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e '\u003cstrong\u003eclicky' switch\u003c\/strong\u003e makes a great power switch or mode toggler. \u003c\/p\u003e\n\u003cp\u003eWe like this switch because it's easy to embed in a seam for easily powering up\/off \u003ca title=\"Wearables\" href=\"\/collections\/adafruit-wearables\"\u003ewearable\u003c\/a\u003e and fabric projects. Can handle up to \u003cstrong\u003e14V and 2A\u003c\/strong\u003e! This is a really satisfying switch.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSqueeze to toggle on and off\u003c\/li\u003e\n\u003cli\u003eRated for up to 14V and 2 Amps\u003c\/li\u003e\n\u003cli\u003eCompact body: 16mm x 15mm x 6mm\u003c\/li\u003e\n\u003cli\u003e190mm long wires for flexible placement\u003c\/li\u003e\n\u003cli\u003eIdeal for wearable and fabric projects\u003c\/li\u003e\n\u003cli\u003eEasy to embed in seams\u003c\/li\u003e\n\u003cli\u003eLightweight at 4.4g\u003c\/li\u003e\n\u003cli\u003eSatisfying tactile feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions of body: 16mm x 15mm x 6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4g\u003c\/li\u003e\n\u003cli\u003eWire length: 190mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1092\/P1092+C2138-001+datasheet.pdf\" title=\"Diagram\" rel=\"noopener\" target=\"_blank\"\u003eDiagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Tactile On\/Off Switch with Leads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739208529,"sku":"ADA1092","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/tactile-on-off-switch-with-leads-adafruit-ada1092-1241231494.jpg?v=1780411690"},{"product_id":"pulse-sensor-amped","title":"Pulse Sensor Amped Kit","description":"\u003cp\u003e\u003cstrong\u003eThe Pulse Sensor Amped Kit is an easy-to-use heart-rate sensor for Arduino and compatible boards, featuring onboard amplification and noise reduction for fast, reliable pulse monitoring in wearable, educational, and interactive projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pulse Sensor Amped Kit\u003c\/strong\u003e is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for \u003ca href=\"\/collections\/arduino-store\" title=\"Arduino Store\"\u003eArduino\u003c\/a\u003e and Arduino compatibles. It can be used by students, artists, athletes, makers, and game \u0026amp; mobile developers who want to easily incorporate live heart-rate data into their projects.\u003cbr\u003e\u003cbr\u003ePulse Sensor Amped adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. Pulse Sensor Amped works with either a \u003cstrong\u003e3V or 5V\u003c\/strong\u003e Arduino.\u003cbr\u003e\u003cbr\u003eLastly, the Pulse Sensor creators have also streamlined and improved the Processing visualization software and Arduino code that comes with this hardware.\u003cbr\u003e\u003cbr\u003eThe kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 24-inch Colour-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.\u003c\/li\u003e\n\u003cli\u003eAn Ear Clip, perfectly sized to the sensor. It can be hot-glued or epoxied to the back of the sensor to get reading from an ear lobe.\u003c\/li\u003e\n\u003cli\u003eParts to make a handy Velcro finger strap. This is another great way to get heart-rate data.\u003c\/li\u003e\n\u003cli\u003e4 Transparent Stickers, to insulate the front of the Pulse Sensor from oily fingers and sweaty earlobes.\u003c\/li\u003e\n\u003cli\u003eThe Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.\u003c\/li\u003e\n\u003cli\u003eProcessing visualization software and Arduino code (made in Processing) to instantly see output of the sensor and for troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-play heart-rate sensor for Arduino and Arduino compatibles\u003c\/li\u003e\n\u003cli\u003eAmplification and noise cancellation circuitry for reliable pulse readings\u003c\/li\u003e\n\u003cli\u003eCompatible with 3V or 5V Arduino boards\u003c\/li\u003e\n\u003cli\u003e24-inch colour-coded cable with male header connectors – no soldering required\u003c\/li\u003e\n\u003cli\u003eIncludes ear clip attachment for earlobe readings\u003c\/li\u003e\n\u003cli\u003eVelcro finger strap components included\u003c\/li\u003e\n\u003cli\u003eFour transparent stickers to insulate sensor from moisture and oils\u003c\/li\u003e\n\u003cli\u003eThree holes around sensor edge for easy sewing integration\u003c\/li\u003e\n\u003cli\u003eProcessing-based visualisation software included\u003c\/li\u003e\n\u003cli\u003eStreamlined Arduino code and improved documentation\u003c\/li\u003e\n\u003cli\u003eSuitable for students, artists, athletes, makers, and developers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Datasheet\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1093\/Pulse+Sensor+Data+Sheet-2018.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Getting Started Project\" href=\"https:\/\/github.com\/WorldFamousElectronics\/PulseSensorStarterProject\" target=\"_blank\"\u003eGetting Started Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Getting Advanced Code\" href=\"https:\/\/github.com\/WorldFamousElectronics\/PulseSensor_Amped_Arduino\" target=\"_blank\"\u003eGetting Advanced Code\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Pulse Sensor Processing Visualizer\" href=\"https:\/\/github.com\/WorldFamousElectronics\/PulseSensor_Amped_Processing_Visualizer\" target=\"_blank\"\u003ePulse Sensor Processing Visualizer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Apress\/Springer\" href=\"https:\/\/link.springer.com\/book\/10.1007\/978-1-4842-9325-6\" target=\"_blank\"\u003eThere's a book from Apress\/Springer written by the designers of this sensor if you want lots of project ideas and code samples!\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"A 3D-printable holder for the sensor to easily attach it to a finger.\" href=\"https:\/\/pulsesensor.com\/products\/gold-stablizer-ring?variant=40702578688105\"\u003eA 3D-printable holder for the sensor to e\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"A 3D-printable holder for the sensor to easily attach it to a finger.\" href=\"https:\/\/pulsesensor.com\/products\/gold-stablizer-ring?variant=40702578688105\" target=\"_blank\"\u003ea\u003c\/a\u003e\u003ca title=\"A 3D-printable holder for the sensor to easily attach it to a finger.\" href=\"https:\/\/pulsesensor.com\/products\/gold-stablizer-ring?variant=40702578688105\"\u003esily attach it to a finger.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Getting started guide (PDF)\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1093\/PulseSensorAmpedGettingStartedGuide.pdf\" target=\"_blank\"\u003eGetting started guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pulse Sensor Amped Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739208593,"sku":"ADA1093","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pulse-sensor-amped-kit-adafruit-ada1093-1241249589.jpg?v=1780419097"},{"product_id":"fixed-laser-mounting-stand","title":"Fixed Laser Mounting Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Fixed Laser Mount provides a secure way to install compatible laser diode modules, featuring a set-screw clamp and four-hole mounting plate for easy attachment to robots, workbenches, and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eUse this nice fixed laser mount to attach any of our \u003cstrong\u003elaser diode modules\u003c\/strong\u003e to your desk, robot, shark, etc. A set-screw holds the laser in place. Has a \u003cstrong\u003eflat mounting plate\u003c\/strong\u003e with four holes for easy attachment and adjustment. Fits all of our modules.\u003c\/p\u003e\n\u003cp\u003eWe also sell the adjustable version here: \u003ca href=\"\/products\/adjustable-laser-mounting-stand\" title=\"Adjustable Laser Mounting Stand\"\u003eAdjustable Laser Mounting Stand\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that the laser is not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed laser mount for securing laser diode modules\u003c\/li\u003e\n\u003cli\u003eSet-screw fastening system\u003c\/li\u003e\n\u003cli\u003eFlat mounting plate with four attachment holes\u003c\/li\u003e\n\u003cli\u003eEasy adjustment capability\u003c\/li\u003e\n\u003cli\u003eUniversal compatibility with all standard modules\u003c\/li\u003e\n\u003cli\u003eLaser module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 35mm x 30mm x 18mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 3.2mm\u003c\/li\u003e\n\u003cli\u003eMounting hole pitch (centre-to-centre): 15mm x 23.5mm\u003c\/li\u003e\n\u003cli\u003eFits lasers up to 12.6mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: 20.3 grams\u003c\/li\u003e\n\u003cli\u003eM3 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fixed Laser Mounting Stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLaser is not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739209425,"sku":"ADA1094","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/fixed-laser-mounting-stand-adafruit-ada1094-1241249583.jpg?v=1780418979"},{"product_id":"board-edge-mounting-kit-pack-of-4","title":"Board Edge Mounting Kit - Pack of 4","description":"\u003cp\u003e\u003cstrong\u003eThe PCB Mounting Standoff Kit provides a simple, secure way to mount PCBs without mounting holes, using clip-style standoffs and screws to hold standard 0.062\" boards in place without glue or tape.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eHaving difficulty attaching a \u003ca href=\"\/collections\/prototyping-pcbs-and-perfboard\" title=\"Prototyping PCBs and Perfboard\"\u003ePCB\u003c\/a\u003e? This kit is especially useful when there are no mounting holes - as with the original \u003ca href=\"\/collections\/raspberry-pi-store\" title=\"Raspberry Pi Store\"\u003eRaspberry Pi\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eInstead of gluing, taping, epoxying, etc. use these elegant standoffs. They have these round hook things that are designed to grip standard \u003cstrong\u003e0.062\" thickness\u003c\/strong\u003e PCBs either by the edge or by the corner.\u003c\/p\u003e\n\u003cp\u003eComes in a \u003cstrong\u003epack of 4\u003c\/strong\u003e with matching \u003cstrong\u003e#6 \u003c\/strong\u003ethread forming screws. Ideal for use with up to \u003cstrong\u003e1\/8\"\u003c\/strong\u003e mounting material. We have these as part of the \u003ca href=\"\/products\/adafruit-pi-dish-for-raspberry-pi-includes-breadboard\" title=\"Adafruit Pi Dish for Raspberry Pi - Includes Breadboard\"\u003ePi Dish kit\u003c\/a\u003e and they work really well!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Raspberry Pi not included. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 4 adhesive-free PCB standoffs\u003c\/li\u003e\n\u003cli\u003eDesigned for PCBs without mounting holes\u003c\/li\u003e\n\u003cli\u003eRound hook grips standard 0.062\" thickness PCBs\u003c\/li\u003e\n\u003cli\u003eGrips PCB edge or corner\u003c\/li\u003e\n\u003cli\u003eIncludes matching #6 thread forming screws\u003c\/li\u003e\n\u003cli\u003eCompatible with up to 1\/8\" mounting material\u003c\/li\u003e\n\u003cli\u003eNo gluing, taping or epoxying required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Datasheet\" href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/TCEHCBS.pdf\" target=\"_blank\"\u003eDatasheet \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eValues for this item from the datasheet match part TCEHCBS-4-01: A: 1\/4\" (6.4mm) B: 13\/64\" (5.2mm)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Board Edge Mounting Kit - Pack of 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739220817,"sku":"ADA1116","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/board-edge-mounting-kit-pack-of-4-adafruit-ada1116-1241339232.jpg?v=1780483601"},{"product_id":"sewable-snaps-5mm-diameter-card-of-24","title":"Sewable Snaps - 5mm Diameter - Card of 24","description":"\u003cp\u003e\u003cstrong\u003eThese 5mm Sew-On Snaps provide a neat, reliable way to connect wearable electronics, fitting perfectly on Flora pads and making it easy to attach projects using conductive thread.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe small \u003cstrong\u003e5mm\u003c\/strong\u003e size of these tin-plated \u003cstrong\u003ebrass snaps\u003c\/strong\u003e means they fit perfectly on \u003ca href=\"\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible\" title=\"FLORA - Wearable Electronic Platform\"\u003eFlora's\u003c\/a\u003e pads! Snaps make a great connector for wearables - solder one side to the board and sew the other to your project with \u003ca href=\"\/products\/conductive-thread-3m\" title=\"Conductive Thread - 3m\"\u003econductive thread\u003c\/a\u003e! This card comes with \u003cstrong\u003e24 complete snaps\u003c\/strong\u003e (socket and stud pairs).\u003c\/p\u003e\n\u003cp\u003eSome discoloration may occur during soldering. These snaps are washable, oxidation-resistant, and nonmagnetic.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dDwmnfpjlno?si=ja79-Hvv6SNDk2_T\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5mm tin-plated brass snaps\u003c\/li\u003e\n\u003cli\u003eCompatible with Flora pads\u003c\/li\u003e\n\u003cli\u003e24 complete snaps (socket and stud pairs) per card\u003c\/li\u003e\n\u003cli\u003eSolderable connector for one side\u003c\/li\u003e\n\u003cli\u003eSewable with conductive thread\u003c\/li\u003e\n\u003cli\u003eWashable and oxidation-resistant\u003c\/li\u003e\n\u003cli\u003eNonmagnetic\u003c\/li\u003e\n\u003cli\u003eIdeal for wearable electronics projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Sewable Snaps - 5mm Diameter - Card of 24\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739226513,"sku":"ADA1126","price":3.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sewable-snaps-5mm-diameter-card-of-24-adafruit-ada1126-1244812337.jpg?v=1781715612"},{"product_id":"copper-foil-tape-with-conductive-adhesive-25mm-x-15-meter-roll","title":"Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll","description":"\u003cp\u003e\u003cstrong\u003eThe Conductive Copper Foil Tape is a flexible, solderable copper tape with conductive adhesive, making it ideal for EMI shielding, capacitive touch sensors, ultra-thin wiring, and other electronics projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCopper tape\u003c\/strong\u003e can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its \u003cstrong\u003eextremely flexible\u003c\/strong\u003e and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire.\u003c\/p\u003e\n\u003cp\u003eOn the back is an electrically conductive adhesive. The adhesive can't carry significant current but it is very handy for sensing applications where you don't want to solder the copper tape.\u003c\/p\u003e\n\u003cp\u003eWe've seen such tape used for EMI shielding, working with EL, making capacitive touch pads, ultra-thin wiring needs, etc.\u003c\/p\u003e\n\u003cp\u003eComes in a roll \u003cstrong\u003e15 meters long\u003c\/strong\u003e, this tape is \u003cstrong\u003e3mils\/0.07mm thick\u003c\/strong\u003e, \u003cstrong\u003e1\"\/25mm wide \u003c\/strong\u003eand has conductive adhesive on one side and a protective paper backing over the adhesive.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RJ2xGFfrND0?si=HWPrJDN5KnUfPqeq\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper tape, extremely flexible and 'shapeable'\u003c\/li\u003e\n\u003cli\u003eSolderable copper surface for reliable connections\u003c\/li\u003e\n\u003cli\u003eCarries electrical current like standard wire\u003c\/li\u003e\n\u003cli\u003eElectrically conductive adhesive backing for sensing applications\u003c\/li\u003e\n\u003cli\u003eIdeal for EMI shielding, EL applications, and capacitive touch pads\u003c\/li\u003e\n\u003cli\u003ePerfect for ultra-thin wiring needs\u003c\/li\u003e\n\u003cli\u003e15 metre roll length\u003c\/li\u003e\n\u003cli\u003e3mil (0.07mm) thickness\u003c\/li\u003e\n\u003cli\u003e25mm width\u003c\/li\u003e\n\u003cli\u003eProtective paper backing on adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 15 meters\u003c\/li\u003e\n\u003cli\u003eThickness: 3mils\/0.07mm\u003c\/li\u003e\n\u003cli\u003eWidth: 1.25mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739227089,"sku":"ADA1127","price":19.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/copper-foil-tape-with-conductive-adhesive-25mm-x-15-meter-roll-adafruit-ada1127-1243964906.jpg?v=1781196790"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/collections\/Adafruit.jpg?v=1625682484","url":"https:\/\/thepihut.com\/collections\/adafruit.oembed?page=34","provider":"The Pi Hut","version":"1.0","type":"link"}