{"title":"Wireless Modules","description":"\u003cp\u003eWireless technologies allow different parts of your project to talk to each other without the constraint of wired connections. They also allow connectivity for IoT projects where communication with the internet is required.\u003c\/p\u003e\n\u003cp\u003eFor some projects, a number of wireless technologies can achieve the same result – however, each has its pros and cons which should be considered by the maker when planning a project.\u003c\/p\u003e\n\u003cp\u003eFor example, WiFi – the obvious choice for internet connectivity – has a high data rate which is ideal for IoT, however, comes at the cost of high power consumption. XBee in comparison has a significantly lower data rate but uses a fraction of the power that WiFi uses.\u003c\/p\u003e\n\u003cp\u003eYou then have newer technologies such as \u003ca href=\"\/collections\/lora-modules\"\u003eLoRa\u003c\/a\u003e which uses even lower power than XBee, with much greater ranges possible, but is half-duplex only – meaning it can only send OR receive data at any one time (not both like XBee).\u003c\/p\u003e\n\u003cp\u003eThere’s also \u003ca href=\"\/collections\/bluetooth-modules\"\u003eBluetooth\u003c\/a\u003e which is really easy to set up and use as a wireless link between your project and a smartphone.\u003c\/p\u003e\n\u003cp\u003eWhatever wireless technology is right for your project, The Pi Hut stock everything you need to turn your project into a reality.\u003c\/p\u003e","products":[{"product_id":"adafruit-atwinc1500-wifi-breakout","title":"Adafruit ATWINC1500 WiFi Breakout","description":"\u003cp\u003e\u003cstrong\u003eThe Adafruit ATWINC1500 WiFi Breakout adds fast, reliable 802.11b\/g\/n connectivity with SSL support to your Arduino - ideal for IoT projects needing secure, high-performance wireless networking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eConnect your \u003ca href=\"\/collections\/arduino-store\" title=\"Arduino Store\"\u003eArduino\u003c\/a\u003e to the Internet with this fine new FCC-certified WiFi module from Atmel. This \u003cstrong\u003e802.11bgn-capable WiFi module\u003c\/strong\u003e is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). We like these so much, they've completely replaced the CC3000 module on all our projects.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/adafruit\" title=\"Adafruit Products\"\u003eAdafruit\u003c\/a\u003e ATWINC1500 WiFi Breakout uses \u003cstrong\u003eSPI to communicate\u003c\/strong\u003e, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with \u003cstrong\u003eArduino M0's and M4s\u003c\/strong\u003e but \u003cstrong\u003edoes not work on Uno (328P) and may not work on other Arduinos\u003c\/strong\u003e. You can clock it as fast as \u003cstrong\u003e12MHz\u003c\/strong\u003e for speedy, reliable packet streaming. And scanning\/connecting to networks is very fast, a few seconds.\u003c\/p\u003e\n\u003cp\u003eThis module works with \u003cstrong\u003e802.11b, g, or n networks\u003c\/strong\u003e \u0026amp; \u003cstrong\u003esupports WEP, WPA and WPA2\u003c\/strong\u003e encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!\u003c\/p\u003e\n\u003cp\u003eSince this is our new favourite SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with \u003cstrong\u003e3V or 5V\u003c\/strong\u003e logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0F7mkdvBoHo?si=kxq-SFioLvQ6A57X\u0026amp;start=259\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFCC-certified 802.11bgn WiFi module from Atmel\u003c\/li\u003e\n\u003cli\u003eSPI communication with 6-wire connection\u003c\/li\u003e\n\u003cli\u003eCompatible with Arduino M0 and M4 boards\u003c\/li\u003e\n\u003cli\u003e12MHz clock speed for reliable packet streaming\u003c\/li\u003e\n\u003cli\u003eSupports WEP, WPA, and WPA2 encryption\u003c\/li\u003e\n\u003cli\u003eTLS 1.2 security support (firmware 19.4.4)\u003c\/li\u003e\n\u003cli\u003eSoft AP mode for ad-hoc networking\u003c\/li\u003e\n\u003cli\u003eLevel shifting for 3V or 5V logic compatibility\u003c\/li\u003e\n\u003cli\u003e3.3V voltage regulator with 300mA spike handling\u003c\/li\u003e\n\u003cli\u003ePowered from 3-5.5VDC input range\u003c\/li\u003e\n\u003cli\u003e3 controllable LEDs for connection and data transmission status\u003c\/li\u003e\n\u003cli\u003eFast network scanning and connection in seconds\u003c\/li\u003e\n\u003cli\u003eSSL support included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: \u003cspan\u003e33mm x 28mm x 4mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 4.4g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eRevision History\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAs of October 27, 2023\u003c\/strong\u003e - we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Datasheets\" href=\"https:\/\/learn.adafruit.com\/adafruit-atwinc1500-wifi-module-breakout\/downloads\" target=\"_blank\"\u003e\u003cspan\u003eDatasheets\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Adafruit ATWINC1500 WiFi Breakout\" href=\"https:\/\/learn.adafruit.com\/adafruit-atwinc1500-wifi-module-breakout\" target=\"_blank\"\u003e\u003cspan\u003eGuide: Adafruit ATWINC1500 WiFi Breakout\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1x Adafruit ATWINC1500 WiFi Breakout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x Header Strip\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740266257,"sku":"ADA2999","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-atwinc1500-wifi-breakout-adafruit-ada2999-1233370042.jpg?v=1776775990"},{"product_id":"adafruit-rfm69hcw-transceiver-radio-breakout-868-or-915-mhz","title":"Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz (RadioFruit)","description":"\u003cp\u003e\u003cstrong\u003eThe RFM69 900MHz Radio Module enables long-range, low-power wireless communication with built-in encryption - ideal for sensor networks and microcontroller projects needing reliable data over large distances.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\"You see, wire telegraph is a kind of a very, very long cat.  You pull his tail in New York and his head is meowing in Los Angeles.  Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there.  The only difference is that there is no cat.\"\u003c\/p\u003e\n\u003cp\u003eSending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth® Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth®, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'\u003c\/p\u003e\n\u003cp\u003eAlso, these \u003ca title=\"Adafruit Products\" href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e packet radios are simpler than WiFi or BLE, you don't have to associate, pair, scan, or worry about connections. All you do is send data whenever you like, and any other modules tuned to that same frequency (and, with the same encryption key) will receive. The receiver can then send a reply back. The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing.\u003c\/p\u003e\n\u003cp\u003eThese modules are great for use with \u003ca title=\"Arduino Store\" href=\"\/collections\/arduino-store\"\u003eArduinos\u003c\/a\u003e or other microcontrollers, say if you want a sensor node network or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. WiFi and BT, on the other hand, are commonly included in computers and phones.\u003c\/p\u003e\n\u003cp\u003eThese radio modules come in four variants (two modulation types and two frequencies) The RFM69's are easiest to work with, and are well known and understood. The LoRa radios are exciting and more powerful but also more expensive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the 900 MHz radio version\u003c\/strong\u003e, which can be used for either \u003cstrong\u003e868MHz or 915MHz\u003c\/strong\u003e transmission\/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. We also carry an \u003ca title=\"Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz (RadioFruit)\" href=\"\/products\/adafruit-rfm69hcw-transceiver-radio-breakout-433-mhz\"\u003eRFM69HCW 433 MHz version here\u003c\/a\u003e. These are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least \u003cstrong\u003e500 meters\u003c\/strong\u003e line of sight using simple wire antennas, probably up to \u003cstrong\u003e5Km\u003c\/strong\u003e with directional antennas and settings tweaking's.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)\u003c\/li\u003e\n\u003cli\u003e50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions, ~30mA during active radio listening.\u003c\/li\u003e\n\u003cli\u003eRange of approx. 500 meters, depending on obstructions, frequency, antenna and power output\u003c\/li\u003e\n\u003cli\u003eCreate multipoint networks with individual node addresses\u003c\/li\u003e\n\u003cli\u003eEncrypted packet engine with AES-128\u003c\/li\u003e\n\u003cli\u003ePacket radio with ready-to-go Arduino libraries\u003c\/li\u003e\n\u003cli\u003eUses the license-free ISM band: \"European ISM\" @ 868MHz or \"American ISM\" @ 915MHz\u003c\/li\u003e\n\u003cli\u003eUse a simple wire antenna or spot for uFL or SMA radio connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach radio comes with some header, a \u003cstrong\u003e3.3V voltage regulator\u003c\/strong\u003e and level shifter that can handle \u003cstrong\u003e3-5V DC\u003c\/strong\u003e power and logic so you can use it with \u003cstrong\u003e3V or 5V devices\u003c\/strong\u003e. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Antenna's not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RUyTLhZyDr8?si=pCwluVINBchTbv5i\u0026amp;start=248\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e900 MHz radio module (868 MHz or 915 MHz capable)\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm power output (up to 100 mW)\u003c\/li\u003e\n\u003cli\u003eApproximately 500 meter range line of sight with wire antenna\u003c\/li\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003eAES-128 encrypted packet engine\u003c\/li\u003e\n\u003cli\u003eAuto-retransmit and error correction\u003c\/li\u003e\n\u003cli\u003eArduino compatible with ready-to-go libraries\u003c\/li\u003e\n\u003cli\u003eSimple packet radio - no pairing or association required\u003c\/li\u003e\n\u003cli\u003eMultipoint networking with individual node addresses\u003c\/li\u003e\n\u003cli\u003eLicense-free ISM band operation\u003c\/li\u003e\n\u003cli\u003e50-150 mA transmit current, ~30 mA receive current\u003c\/li\u003e\n\u003cli\u003e3.3V regulator and level shifter for 3-5V logic compatibility\u003c\/li\u003e\n\u003cli\u003eWire antenna or optional uFL\/SMA connector for external antenna\u003c\/li\u003e\n\u003cli\u003eRequires soldering of headers and antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.3mm x 29.3mm x 3.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of December 23, 2022\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Datasheet\" href=\"https:\/\/learn.adafruit.com\/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts\/downloads\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Tutorial\" href=\"https:\/\/learn.adafruit.com\/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts\" target=\"_blank\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz (RadioFruit)\u003c\/li\u003e\n\u003cli\u003e1x Header Strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAntenna's not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740302289,"sku":"ADA3070","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-rfm69hcw-transceiver-radio-breakout-868-or-915-mhz-radiofruit-adafruit-ada3070-1233411715.jpg?v=1776795795"},{"product_id":"adafruit-rfm69hcw-transceiver-radio-breakout-433-mhz","title":"Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz (RadioFruit)","description":"\u003cp\u003e\u003cstrong\u003eThe RFM69HCW 433MHz Radio Module is a long-range packet radio for microcontrollers, offering up to +20dBm output, AES-128 encryption, auto-retransmit, and simple SPI interfacing for reliable wireless data links.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\"You see, wire telegraph is a kind of a very, very long cat.  You pull his tail in New York and his head is meowing in Los Angeles.  Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there.  The only difference is that there is no cat.\"\u003c\/p\u003e\n\u003cp\u003eSending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth® Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth®, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren't so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can't send data as fast but you can send data a lot farther.'\u003c\/p\u003e\n\u003cp\u003eAlso, these \u003ca href=\"\/collections\/adafruit\" title=\"Adafruit Products\"\u003eAdafruit\u003c\/a\u003e packet radios are simpler than WiFi or BLE, you don't have to associate, pair, scan, or worry about connections. All you do is send data whenever you like, and any other modules tuned to that same frequency (and, with the same encryption key) will receive. The receiver can then send a reply back. The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing.\u003c\/p\u003e\n\u003cp\u003eThese modules are great for use with \u003ca href=\"\/collections\/arduino-store\" title=\"Arduino Store\"\u003eArduinos\u003c\/a\u003e or other microcontrollers, say if you want a sensor node network or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. WiFi and BT, on the other hand, are commonly included in computers and phones.\u003c\/p\u003e\n\u003cp\u003eThese radio modules come in four variants (two modulation types and two frequencies) The \u003cstrong\u003eRFM69's are easiest to work with\u003c\/strong\u003e, and are well known and understood. The LoRa radios are exciting and more powerful but also more expensive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis module is the RFM69HCW in 433 MHz version\u003c\/strong\u003e! We also carry a \u003ca href=\"\/products\/adafruit-rfm69hcw-transceiver-radio-breakout-868-or-915-mhz\" title=\"Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz (RadioFruit)\"\u003e900 MHz version here\u003c\/a\u003e. These are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least\u003cstrong\u003e 500 meters\u003c\/strong\u003e line of sight using simple wire antennas, probably up to \u003cstrong\u003e5Km \u003c\/strong\u003ewith directional antennas and settings tweaking's\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)\u003c\/li\u003e\n\u003cli\u003e50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions, ~30mA during active radio listening.\u003c\/li\u003e\n\u003cli\u003eRange of approx. 500 meters, depending on obstructions, frequency, antenna and power output\u003c\/li\u003e\n\u003cli\u003eCreate multipoint networks with individual node addresses\u003c\/li\u003e\n\u003cli\u003eEncrypted packet engine with AES-128\u003c\/li\u003e\n\u003cli\u003ePacket radio with ready-to-go Arduino libraries\u003c\/li\u003e\n\u003cli\u003eUses the amateur or license-free ISM band (ITU \"Europe\" license-free ISM or ITU \"American\" amateur with limitations)\u003c\/li\u003e\n\u003cli\u003eUse a simple wire antenna or spot for uFL or SMA radio connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach radio comes with some header, a \u003cstrong\u003e3.3V voltage regulator\u003c\/strong\u003e and level shifter that can handle \u003cstrong\u003e3-5V DC\u003c\/strong\u003e power and logic so you can use it with \u003cstrong\u003e3V or 5V devices\u003c\/strong\u003e. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Antenna's not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RUyTLhZyDr8?si=ivV2MJxTjLd6iioL\u0026amp;start=248\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSX1231 based FSK packet radio module with SPI interface\u003c\/li\u003e\n\u003cli\u003e433 MHz frequency (license-free ISM band)\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm power output, up to 100 mW (software selectable)\u003c\/li\u003e\n\u003cli\u003e500+ meter range with simple wire antenna; up to 5 km with directional antennas\u003c\/li\u003e\n\u003cli\u003eAES-128 encryption and auto-retransmit capability\u003c\/li\u003e\n\u003cli\u003e50-150 mA transmit current; ~30 mA during active listening\u003c\/li\u003e\n\u003cli\u003eCompatible with 3-5V microcontrollers (Arduino and others)\u003c\/li\u003e\n\u003cli\u003eMultipoint networking with individual node addresses\u003c\/li\u003e\n\u003cli\u003eIncludes 3.3V regulator and level shifter\u003c\/li\u003e\n\u003cli\u003eReady-to-use Arduino libraries available\u003c\/li\u003e\n\u003cli\u003eSupports uFL or SMA connectors for external antennas\u003c\/li\u003e\n\u003cli\u003eSold individually; only communicates with same frequency\/model radios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.3mm x 29.3mm x 3.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of December 5, 2022\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"FCC Test Report\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/3071\/p3071p3077_RFM69HCW-433S2-FCC.pdf\" target=\"_blank\"\u003eFCC Test Report\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Datasheets\" href=\"https:\/\/learn.adafruit.com\/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts\/downloads\" target=\"_blank\"\u003eDatasheets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Tutorial\" href=\"https:\/\/learn.adafruit.com\/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts\" target=\"_blank\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz (RadioFruit)\u003c\/li\u003e\n\u003cli\u003e1x Header Strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAntenna's not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740303185,"sku":"ADA3071","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/adafruit-rfm69hcw-transceiver-radio-breakout-433-mhz-radiofruit-adafruit-ada3071-1233862799.jpg?v=1776855373"},{"product_id":"adafruit-radio-featherwing-rfm69hcw-900mhz","title":"Adafruit Radio FeatherWing - RFM69HCW 900MHz (RadioFruit)","description":"\u003cp\u003eAdd short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433\/900 MHz to the Internet or your mobile device.\u003c\/p\u003e\u003cp\u003eThese radio modules come in four variants (two modulation types and two frequencies) The RFM69's are easiest to work with, and are well known and understood. The LoRa radios are exciting, longer-range and more powerful but also more expensive.\u003c!--EndFragment--\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-radio-featherwing-rfm69hcw-433mhz\"\u003eRFM69 @ 433 MHz\u003c\/a\u003e\u003c\/strong\u003e - basic packetized FSK\/GFSK\/MSK\/GMSK\/OOK radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local  amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-radio-featherwing-rfm69hcw-900mhz\"\u003eRFM69 @ 900 MHz\u003c\/a\u003e\u003c\/strong\u003e - basic packetized FSK\/GFSK\/MSK\/GMSK\/OOK radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-lora-radio-featherwing-rfm95w-433-mhz\"\u003eRFM98 @ 433 MHz\u003c\/a\u003e\u003c\/strong\u003e - LoRa capable radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-lora-radio-featherwing-rfm95w-900-mhz\"\u003eRFM95 @ 900 MHz\u003c\/a\u003e\u003c\/strong\u003e - LoRa capable radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis is the RFM69 @ 900 MHz version,\u003c\/strong\u003e it can be used for 868 MHz or 915 MHz (the radios use software configured frequency) These are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least 500 meters line of sight using simple wire antennas, probably up to 5Km with directional antennas and settings tweakings\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003ePacket radio with ready-to-go Arduino libraries\u003c\/li\u003e\n\u003cli\u003eUses the license-free ISM bands\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)\u003c\/li\u003e\n\u003cli\u003e50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions\u003c\/li\u003e\n\u003cli\u003eRange of approx. 350 meters, depending on obstructions, frequency, antenna and power output\u003c\/li\u003e\n\u003cli\u003eCreate multipoint networks with individual node addresses\u003c\/li\u003e\n\u003cli\u003eEncrypted packet engine with AES-128\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCurrently tested to work with the \u003cstrong\u003eFeather ESP8266\u003c\/strong\u003e, \u003cstrong\u003eFeather 32u4, WICED Feather, Teensy 3 Feather\u003c\/strong\u003e and \u003cstrong\u003eFeather M0 \u003c\/strong\u003eseries, some wiring is required to configure the FeatherWing for the chipset you plan to use.\u003c\/p\u003e\u003cp\u003eAll radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc.\u003c\/p\u003e\u003cp\u003eEach radio 'Wing comes with some header. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally \u003ca href=\"https:\/\/thepihut.com\/products\/ufl-smt-antenna-connector\"\u003eyou can pick up a uFL\u003c\/a\u003e or \u003ca href=\"https:\/\/thepihut.com\/products\/edge-launch-sma-connector-for-1-6mm-0-062-thick-pcbs\"\u003eSMA edge-mount connector\u003c\/a\u003e and attach an external duck.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/radio-featherwing\/downloads\"\u003eEagleCAD PCB files, Fritzing, datasheets, and schematic available in the product tutorial\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 51.0mm x 22.8mm x 3.7mm \/ 2.0\" x 0.9\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 4.7g \/ 0.2oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740386961,"sku":"ADA3229","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-radio-featherwing-rfm69hcw-900mhz-radiofruit-adafruit-ada3229-28609999831235.jpg?v=1646681593"},{"product_id":"adafruit-radio-featherwing-rfm69hcw-433mhz","title":"Adafruit Radio FeatherWing - RFM69HCW 433MHz (RadioFruit)","description":"\u003cp\u003eAdd short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433\/900 MHz to the Internet or your mobile device.\u003c\/p\u003e\u003cp\u003eThese radio modules come in four variants (two modulation types and two frequencies) The RFM69's are easiest to work with, and are well known and understood. The LoRa radios are exciting, longer-range and more powerful but also more expensive.\u003c!--EndFragment--\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-radio-featherwing-rfm69hcw-433mhz\"\u003eRFM69 @ 433 MHz\u003c\/a\u003e\u003c\/strong\u003e - basic packetized FSK\/GFSK\/MSK\/GMSK\/OOK radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local  amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-radio-featherwing-rfm69hcw-900mhz\"\u003eRFM69 @ 900 MHz\u003c\/a\u003e\u003c\/strong\u003e - basic packetized FSK\/GFSK\/MSK\/GMSK\/OOK radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-lora-radio-featherwing-rfm95w-433-mhz\"\u003eRFM98 @ 433 MHz\u003c\/a\u003e\u003c\/strong\u003e - LoRa capable radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-lora-radio-featherwing-rfm95w-900-mhz\"\u003eRFM95 @ 900 MHz\u003c\/a\u003e\u003c\/strong\u003e - LoRa capable radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThis is the RFM69 @ 433 MHz version \u003c\/strong\u003eThese are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least 500 meters line of sight using simple wire antennas, probably up to 5Km with directional antennas and settings tweakings\u003c!--EndFragment--\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003ePacket radio with ready-to-go Arduino libraries\u003c\/li\u003e\n\u003cli\u003eUses the license-free ISM bands\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)\u003c\/li\u003e\n\u003cli\u003e50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions\u003c\/li\u003e\n\u003cli\u003eRange of approx. 350 meters, depending on obstructions, frequency, antenna and power output\u003c\/li\u003e\n\u003cli\u003eCreate multipoint networks with individual node addresses\u003c\/li\u003e\n\u003cli\u003eEncrypted packet engine with AES-128\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCurrently tested to work with the \u003cstrong\u003eFeather ESP8266\u003c\/strong\u003e, \u003cstrong\u003eTeensy 3 Feather, WICED Feather, Feather 32u4\u003c\/strong\u003e and \u003cstrong\u003eFeather M0 \u003c\/strong\u003eseries, some wiring is required to configure the FeatherWing for the chipset you plan to use.\u003c\/p\u003e\u003cp\u003eAll radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433, etc.\u003c\/p\u003e\u003cp\u003eEach radio 'Wing comes with some header. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally \u003ca href=\"https:\/\/thepihut.com\/products\/ufl-smt-antenna-connector\"\u003eyou can pick up a uFL\u003c\/a\u003e or \u003ca href=\"https:\/\/thepihut.com\/products\/edge-launch-sma-connector-for-1-6mm-0-062-thick-pcbs\"\u003eSMA edge-mount connector\u003c\/a\u003e and attach an external duck.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/radio-featherwing\/downloads\"\u003eEagleCAD PCB files, Fritzing, datasheets, and schematic available in the product tutorial\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 51.0mm x 22.8mm x 3.7mm \/ 2.0\" x 0.9\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 4.6g \/ 0.2oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740387857,"sku":"ADA3230","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-radio-featherwing-rfm69hcw-433mhz-radiofruit-adafruit-ada3230-28610000421059.jpg?v=1646681772"},{"product_id":"xbee-usb-adapter-ftdi-ready","title":"Xbee USB Adapter (FTDI Ready)","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThe upgraded DFRobot Xbee USB adapter is designed for the XBee module configuration parameters to facilitate using or to work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino FIO\/pro\/mini、lilypad Arduino and so on. It's a must-have for interactive electronic installations and projects.\u003c\/p\u003e\n\u003cdiv\u003eThe adapter allows the PC to configure XBee \/ Bluetooth module and the controller \/ development board for wireless data transmission via USB cable. You can upload your program through the wireless controller module, or conduct wireless real-time data transmission. The adapter uses a FTDI232 USB-UART converter chip to ensure stable and reliable data transmission.\u003c\/div\u003e\n\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\nVersion Upgrade\u003c\/span\u003e: New Version has replaced MiniUSB port with Micro USB port.\n\u003cbr\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eProject 1. \u003ca href=\"https:\/\/www.dfrobot.com\/blog-609.html\"\u003eBuild An Automatic Plant Watering System with ESP8266\u003c\/a\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware needs:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/esp8266-wifi-bee-arduino-compatible\"\u003eESP8266 Wifi Bee (Arduino Compatible)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/xbee-usb-adapter-ftdi-ready\"\u003eXbee USB adapter (FTDI ready)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/ecoduino-an-auto-planting-kit\"\u003eEcoDuino - An Auto Planting Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/blog-593.html\" target=\"_self\"\u003e\u003cb\u003eESP8266 Arduino Programming Tutorial - DFRobot.com\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\nHardware\u003cbr\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/dfrduino-uno-r3-arduino-compatible\" target=\"_self\"\u003eDFRduino UNO R3\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/thepihut.com\/products\/xbee-usb-adapter-ftdi-ready\" target=\"_self\"\u003eXbee USB adapter (FTDI ready)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-rs485-io-expansion-shield-for-arduino\" target=\"_self\"\u003eIO Expansion Shield for Arduino (V6)\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/thepihut.com\/products\/usb-cable-a-b-for-arduino-uno-mega\" target=\"_self\"\u003eUSB Cable A-B for Arduino\u003c\/a\u003e\u003cbr\u003eMini USB cable\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Features\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e Used for the XBee module configuration parameters\u003c\/li\u003e\n\u003cli\u003e Easily connected to a PC via micro USB cable\u003c\/li\u003e\n\u003cli\u003e XBee-setting support software X-CTU\u003c\/li\u003e\n\u003cli\u003e Also used as a USB-TTL adapter\u003c\/li\u003e\n\u003cli\u003e Voltage: +5V(USB Power)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/DFR0050\/XBEE%20Adapter%20SCH%20DFR0050.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eXbee configuration tutorial\u003c\/li\u003e\n\u003cli\u003eArduino xbee library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eXbee USB Adapter x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740627217,"sku":"DFR0050","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/xbee-usb-adapter-ftdi-ready-dfrobot-dfr0050-28601737085123.jpg?v=1646391620"},{"product_id":"apc220-radio-communication-module","title":"APC220 Radio Communication Module","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e The APC220 radio module provides a simple and economic solution to wireless data communications. Integrates an embedded high speed microprocessor and high performance IC that creates a transparent UART\/TTL interface, and elminates any need for packetizing and data encoding. If you are looking for a low-cost solution with better range performance, this has being our customer choice for a long time now.\u003cbr\u003e\n\u003cbr\u003eWith this module, you can build wireless projects in an easy way.\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 5V\u003c\/li\u003e\n\u003cli\u003eTransmit distance up to 1000m (line of sight) @9600 bps\u003c\/li\u003e\n\u003cli\u003e256 bytes data buffer\u003c\/li\u003e\n\u003cli\u003eHigh sensitivity (-112dbbm @9600 bps)\u003c\/li\u003e\n\u003cli\u003eGFSK modulation\u003c\/li\u003e\n\u003cli\u003eUART\/TTL interface\u003c\/li\u003e\n\u003cli\u003eEmbedded watch dog\u003c\/li\u003e\n\u003cli\u003eSize: 37 x 17 x 6.5 mm (1.46x 0.67x 0.26 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/TEL0005\/APC220_Manual_en.pdf\"\u003eUser guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/TEL0005\/APC220_Datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/APC220_Radio_Data_Module(SKU:TEL0005)\"\u003eWiki (APC220 Radio Communication Module)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/TEL0005\/rfmagic.rar\"\u003eRF-Magic Configure software\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eAPC220 module   x2\u003c\/li\u003e\n\u003cli\u003eAntenna for radio communication   x2\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thepihut.com\/products\/usb-to-ttl-converter-cp210\"\u003eUSB to TTL Converter (CP210)\u003c\/a\u003e   x1\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Projects                \u003c\/h2\u003e\n\u003cp\u003e\n \u003c\/p\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSetting it up and initial testings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e                                 \u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e ","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27741042513,"sku":"TEL0005","price":38.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/apc220-radio-communication-module-dfrobot-tel0005-28601696256195.jpg?v=1646848099"},{"product_id":"bluno-bee-turn-arduino-to-a-bluetooth-4-0-ble-ready-board","title":"Bluno Bee","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003e\u003cspan style=\"line-height: 1.42857;\"\u003eBluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket.  Bluno Bee is designed to have voltage regulator which supports both 5V and 3.3V MCUs.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"line-height: 1.42857;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"line-height: 1.42857;\"\u003eBluno Bee is talking to your Arduino serial port , and able to turn your arduino to bluetooth 4.0 (BLE) ready instantly.  Simply get an \u003ca href=\"https:\/\/thepihut.com\/products\/gravity-io-expansion-shield-for-arduino-v7-1\" target=\"_blank\"\u003eArduino IO Sensor Expansion Shield\u003c\/a\u003e and plug this module to xbee socket, you have an Arduino BLE ready board. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"line-height: 1.42857;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"line-height: 1.42857;\"\u003eWith two Bluno Bee, two arduino are able to communicate with each other via Bluetooth.  Y\u003c\/span\u003e\u003cspan style=\"line-height: 17.1428px;\"\u003eou can enjoy features like point-to-point wireless transparent transmission, master-slave machine setting, wireless code (sketch) uploading and HID connection with PC.\u003c\/span\u003e\u003cspan style=\"line-height: 17.1428px;\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"line-height: 1.42857;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"line-height: 1.42857;\"\u003eFor more compact size or want an all in one \u003ca href=\"https:\/\/thepihut.com\/collections\/arduino-store\" target=\"_blank\"\u003earduino\u003c\/a\u003e ble board, we recommend our Bluno series,  they are based on Arduino Uno or Arduino Mega and with Bluetooth 4.0 (BLE) build-in, they are more cost effective and compact.  \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.42857;\"\u003eWe've also developed Apps (Play Bluno) on both Android and IOS platform for you to start playing between phone and arduino immediately. At the same time, we provide developers more freedom and support: users can not only debug \u003c\/span\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bluno-an-arduino-bluetooth-4-0-ble-board\" style=\"line-height: 1.42857;\"\u003eBluno - An Arduino Bluetooth 4.0 (BLE) Board\u003c\/a\u003e\u003cspan style=\"line-height: 1.42857;\"\u003e through AT command, but also update BLE chip firmare via USB. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"line-height: 17.1428px;\"\u003eIt is suitable for applications like wearable device, for example a smart pedometer bracelet with Arduino + Android\/IOS. By linking into star network of low power consumption, BLE achieves rapid real-time communication. \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003ctitle\u003eJavaScript display\u003c\/title\u003e\n\u003cscript language=\"javascript\" type=\"text\/javascript\"\u003e\n\n  function display(){\n\n      var div1 = document.getElementById(\"div1\");\n\n      if(div1.style.display==\"none\"){\n\n          div1.style.display = \"block\";\n\n          div2.style.display = \"none\";\n\n      }else{\n\n          div1.style.display = \"none\";\n\n          div2.style.display = \"block\";\n\n      }\n\n  }\n\n  \u003c\/script\u003e\n\u003cinput type=\"button\" value=\"Check Bluetooth Module Selection Guide For More Information\" onclick=\"display()\"\u003e\n\u003cdiv id=\"div1\" style=\"display: none;\"\u003e\n\u003ctable width=\"891\" style=\"text-align: center; border: 1px solid rgb(255, 255, 255);\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"131\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\"\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"152\"\u003e\n\u003cfont color=\"#1e91cf\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bluetooth-2-0-module-v3-for-arduino\" target=\"_blank\"\u003eBluetooth 2.0 Module V3 For Arduino\u003c\/a\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/font\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"152\"\u003e\n\u003cfont color=\"#14628c\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bluetooth-2-0-bee-module-for-arduino\" target=\"_blank\"\u003eBluetooth 2.0 Bee Module For Arduino\u003c\/a\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/font\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"152\"\u003e\n\u003cfont color=\"#14628c\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bluno-link-a-usb-bluetooth-4-0-ble-dongle-support-wireless-sketch-uploading\" target=\"_blank\"\u003eBluno Link - A USB Bluetooth 4.0 (BLE) Dongle\u003c\/a\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/font\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"152\"\u003e\n\u003cfont color=\"#14628c\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003e\u003cu\u003eBluetooth Adapter Mini\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/font\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eSKU\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eTEL0073\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eTEL0026\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eTEL0023\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eTEL0087\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eTEL0002\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eBLE Chip\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e TI CC2540\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eCSR BC417143\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eCSR BC417143\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e TI CC2540\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eFrequency\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e2.4GHz\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e2.4 ~ 2.48GHz unlicensed ISM band\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e2.4 ~ 2.48GHz unlicensed ISM band\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e2.4GHz\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e2.4 ~ 2.48GHz FHSS\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eTransfer rate\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e1Mbps GFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eAsynchronous: 2.1Mbps (Max) \/ 160 kbps; Synchronous: 1Mbps\/1Mbps\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eAsynchronous: 2.1Mbps (Max) \/ 160 kbps; Synchronous: 1Mbps\/1Mbps\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e1Mbps GFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e3Mbps\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eBLE protocol\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eV4.0\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eV2.0 + EDR\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eV2.0 + EDR\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eV4.0\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eV2.0\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eModulation\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eGFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eGFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eGFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eGFSK\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eFHSS\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003ePower consumption\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10.6mA average, ready mode: 8.7mA\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10.6mA average, ready mode: 8.7mA\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eSensitivity\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-93dBm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e≤-84dBm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e≤-84dBm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-93dBm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e≤-84dBm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eWorking Voltage\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e 3.3V\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e+3.5 V ~ +8 V DC and 3.3V DC\/50mA \u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e3.3V\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e3.3V\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eOperating temperature\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e -40 ℃ ~ +85 ℃\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-20 ℃ ~ +55 ℃\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-20 ℃ ~ +55 ℃\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-10 ℃ ~ +85 ℃\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e-20℃ ~ +55℃\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eTransmission distance\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e30m\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e20 ~ 30m\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e20 ~ 30m\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10 ~ 20m\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u0026lt;10m\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eDimension\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e32*22mm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e40*20*13mm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e32*24*9mm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e32mm * 16mm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e20*16*8mm\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eWeight (g)\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e12\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e10\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eAT command to debug the BLE\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003emaster-salve machine switch\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eTransparent transmission\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eWireless programming\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√ (Available for Bluno series)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eiBeacons\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eBLE HID\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eMobile App Control\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e√\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e—\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e—\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" bgcolor=\"#ed6a00;\" width=\"131\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003esupport Android and IOS applications,open source code,suitable for secondary development by the user\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eCompatible with APC220 communication interface, can be directly used in I\/O Expansion Shield, Romeo, XBoard and etc,.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eIt can be plugged into the Arduino controller using the XBEE base for Bluetooth wireless control.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eStandard USB interface. Support for firmware update via USB. Install Arduino UNO USB driver, default host mode.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"border: 1px solid #fff;\" width=\"152\" bgcolor=\"#eae4e4\"\u003e\n\u003cspan style=\"font-size: 16px;\"\u003eUSB2.0 standard interface. supports the native Windows Bluetooth stack.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"div2\" style=\"display: block;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Features\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eAT command to debug the BLE\u003c\/li\u003e\n\u003cli\u003esupport the master-salve machine switch\u003c\/li\u003e\n\u003cli\u003eTransparent transmission\u003c\/li\u003e\n\u003cli\u003eWireless programming for Arduino processor (Compatible with Arduino UNO,Fio and Mega)\u003c\/li\u003e\n\u003cli\u003esupport usb update BLE chip program\u003c\/li\u003e\n\u003cli\u003esupport bluetooth HID\u003c\/li\u003e\n\u003cli\u003econvenient to upgrade firmware of BLE\u003c\/li\u003e\n\u003cli\u003esupport Android and IOS applications,open source code,suitable for secondary development by the user\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eChip:TI CC2540\u0026gt;\u003c\/li\u003e\n\u003cli\u003eWorking Voltage: +3.3 -5v DC\u003c\/li\u003e\n\u003cli\u003ePower consumption: working: 10.6mA average, ready mode: 8.7mA\u003c\/li\u003e\n\u003cli\u003ePin Layout: Compatible with Xbee pinout\u003c\/li\u003e\n\u003cli\u003eFrequency: 2.4GHz\u003c\/li\u003e\n\u003cli\u003eTransfer rate:  ≤1Mbps\u003c\/li\u003e\n\u003cli\u003eModulation: GFSK, bluetooth low power, V4.0\u003c\/li\u003e\n\u003cli\u003eSensitivity: -93dB\u003c\/li\u003e\n\u003cli\u003eOperating temperature： -40 ℃ ~ +85 ℃ \u003c\/li\u003e\n\u003cli\u003eTransmission distance: 60m in free space\u003c\/li\u003e\n\u003cli\u003eSize:32mm * 22mm (1.26 * 0.87\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/\/www.dfrobot.com\/wiki\/index.php\/BLE-Link_(SKU:TEL0073)#Specifications\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Arduinolibrary\/DFRobot_BLE_Link\/raw\/master\/BLE-LINK%20V1.1%20sch.pdf\" rel=\"nofollow\"\u003eSchematic V1.1\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eHardware Compaitibility\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/xbee-shield-for-arduino\"\u003eXbee shield for Arduino\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-io-expansion-shield-for-arduino-v7-1\"\u003eIO Expansion shield for Arduino V7\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-io-sensor-shield-for-arduino-mega-due\"\u003eMega IO Expansion Shield V2.3 For Arduino Mega\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/io-expansion-shield-for-launchpad\"\u003eIO Expansion Shield for Launchpad\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eDFRobot Leonardo with Xbee socket\u003c\/li\u003e\n\u003cli\u003eAny devices with xbee socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDemo Tutorial\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Programming Simple Tutorial\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/\/www.dfrobot.com\/wiki\/index.php\/Bluno_SKU:DFR0267#Bluno_Basic_Demo\"\u003eBluno Basic Demo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluno Bee  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27741060689,"sku":"TEL0073","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/bluno-bee-dfrobot-tel0073-28601702285507.jpg?v=1646627767"},{"product_id":"esp8266-wifi-bee-arduino-compatible","title":"ESP8266 WiFi Bee  (Arduino Compatible)","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module or Upgrade firmware.\u003cbr\u003e\nESP8266 arduino module has a powerful on-chip processing and storage capacity, built-in 32-bit processor, built-in Lwip protocol stack. Support AP+STA mode co-exist. And you could configure various parameters via AT commands.\u003cbr\u003e\n\u003cbr\u003e\nNote: Since the STA mode which support the Server mode is not stable, we are working on that you could refer to the ESP8266 manual book to try.\u003cbr\u003e\n \n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e In order to configure this module, you will need an adapter or Xbee shield that lets you communicate with the module, before you can plug it and use on other modules. Compatible device: \u003ca href=\"https:\/\/thepihut.com\/products\/xbee-usb-adapter-ftdi-ready\"\u003eXbee USB adapter (FTDI)\u003c\/a\u003e\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eESP8266 Tutorials:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-604.html\" target=\"_self\" title=\"ESP8266 micropython- Tutorial 1: Introduction\"\u003eESP8266 micropython- Tutorial 1: Introduction\u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/blog-605.html\" target=\"_self\" title=\"ESP8266 micropython- Tutorial 2: Micropython GPIO\"\u003eESP8266 micropython- Tutorial 2: Micropython GPIO\u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/blog-606.html\" target=\"_self\" title=\"ESP8266 micro python - Tutorial 3: Micropython Timer I2C\"\u003eESP8266 micropython - Tutorial 3: Micropython Timer I2C\u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/blog-607.html\" target=\"_self\" title=\"ESP8266 Micropython - Tutorial 4: How To Interrupt Micropython\"\u003eESP8266 Micropython - Tutorial 4: How To Interrupt Micropython\u003c\/a\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/blog-608.html\" target=\"_self\" title=\"ESP8266 Micropython -Tutorial 5: Micropython UDP\"\u003eESP8266 Micropython -Tutorial 5: Micropython UDP\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-626.html\"\u003eESP8266 WiFi Bee: Connecting to an Access Point with AT commands\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-680.html\"\u003eESP8266 Tutorial: MicroPython Support\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-681.html\"\u003eESP8266 MicroPython Tutorial: Simple variables\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-627.html\"\u003eESP8266 WiFi Bee: Setting an Access Point with AT commands\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-687.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Running scripts from a computer\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-689.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: HTTP GET Requests\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-688.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Automatic connection to WiFi\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-712.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Working with lists\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-713.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Lambda functions\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-714.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Applying map function to lists\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-748.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: String split method\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-715.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Applying filter function to lists\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-741.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Working with dictionaries\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-915.html\"\u003eESP32 \/ ESP8266 Arduino: Bitwise shift operators\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-914.html\"\u003eESP32 \/ ESP8266 Tutorial: Class constructors\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-913.html\"\u003eESP32 \/ ESP8266 Arduino Tutorial: Initializer list\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-922.html\"\u003eESP8266 Arduino: Asynchronous HTTP web server\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-918.html\"\u003eESP32 \/ ESP8266 Arduino: The typedef keyword\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-919.html\"\u003eESP32 \/ ESP8266 Arduino Tutorial: Using structs\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-957.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Writing a file\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-930.html\"\u003eESP32 \/ ESP8266 Arduino: The auto keyword\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-956.html\"\u003eESP32 \/ ESP8266 MicroPython Tutorial: Reading a file\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-931.html\"\u003eESP32 \/ ESP8366 Arduino: Creating a simple class\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/blog-960.html\"\u003eESP8266 Tutorial: Adding Swagger UI to REST API\u003c\/a\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWi-Fi Direct (P2P),soft-AP\u003c\/li\u003e\n\u003cli\u003eBuilt-in TCP\/IP protocol stack\u003c\/li\u003e\n\u003cli\u003eBuilt-in low-power 32-bit CPU: can work as an application processor\u003c\/li\u003e\n\u003cli\u003eSupport WPA WPA2\/WPA2-PSK encryption\u003c\/li\u003e\n\u003cli\u003eSupport UART interface\u003c\/li\u003e\n\u003cli\u003eSupport for TTL serial port to wireless application\u003c\/li\u003e\n\u003cli\u003eWorking voltage: 3.3V power \u0026lt;240Ma\u003c\/li\u003e\n\u003cli\u003eWireless standard: IEEE802.11b\/g\/n\u003c\/li\u003e\n\u003cli\u003eFrequency: 2.4 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/SKU:TEL0092_WiFi_Bee-ESP8266_Wirelss_module\"\u003eWIKI (SKU:TEL0092 WiFi Bee-ESP8266 Wirelss module)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Arduinolibrary\/DFRobot_Wifi_Bee_ESP8266\/blob\/master\/ESP8266.rar?raw=true\" rel=\"nofollow\"\u003eESP8266 Arduino library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Arduinolibrary\/DFRobot_Wifi_Bee_ESP8266\/raw\/master\/4A-ESP8266__AT%20Instruction%20Set__EN_v0.23.pdf\" rel=\"nofollow\"\u003eAT Commend Instruction\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/Arduinolibrary\/DFRobot_Wifi_Bee_ESP8266\/blob\/master\/ESP8266Flasher_en.zip?raw=true\" rel=\"nofollow\"\u003eESP8266 Firmware and Tools\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eOfficial Forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWifi Bee-ESP8266    x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Projects\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cb\u003e\nProject 1. \u003ca href=\"https:\/\/www.dfrobot.com\/blog-767.html\" target=\"_blank\"\u003eHow to make a Heart Rate Monitor\u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\nThis project makes a Heart Beat Detection and Monitoring System using Arduino that will detect the heart beat using the Pulse Sensor and will show the readings in BPM (Beats Per Minute). \u003cbr\u003e\nHardware needs:\u003cbr\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArduino UNO Rev3\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-io-expansion-shield-for-arduino-v7-1\"\u003eI\/O Expansion Shield for Arduino\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-heart-rate-monitor-sensor-for-arduino\"\u003eHeart Rate Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/esp8266-wifi-bee-arduino-compatible\"\u003eESP8266 WiFi Bee\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProject 2. \u003ca href=\"https:\/\/www.dfrobot.com\/blog-782.html\"\u003eESP8266 Project: Desktop Weather Station With WIFI\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eHardware needs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFireBeetle Board-ESP8266 WiFi dev board\u003c\/li\u003e\n\u003cli\u003e2.8\" USB TFT Touch Display Screen \u003c\/li\u003e\n\u003cli\u003e3.7V Polymer Lithium lon battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eProject 3. \u003ca href=\"https:\/\/www.dfrobot.com\/blog-609.html\"\u003eBuild An Automatic Plant Watering System with ESP8266\u003c\/a\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eHardware needs:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/esp8266-wifi-bee-arduino-compatible\"\u003eESP8266 Wifi Bee (Arduino Compatible)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/xbee-usb-adapter-ftdi-ready\"\u003eXbee USB adapter (FTDI ready)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/ecoduino-an-auto-planting-kit\"\u003eEcoDuino - An Auto Planting Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\n\u003cb\u003eProject 4. \u003ca href=\"https:\/\/www.dfrobot.com\/blog-593.html\" target=\"_self\"\u003eESP8266 Arduino Programming Tutorial - DFRobot.com\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\nHardware needs:\u003cbr\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/dfrduino-uno-r3-arduino-compatible\" target=\"_self\"\u003eDFRduino UNO R3\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/thepihut.com\/products\/xbee-usb-adapter-ftdi-ready\" target=\"_self\"\u003eXbee USB adapter (FTDI ready)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/gravity-rs485-io-expansion-shield-for-arduino\" target=\"_self\"\u003eIO Expansion Shield for Arduino (V6)\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/thepihut.com\/products\/usb-cable-a-b-for-arduino-uno-mega\" target=\"_self\"\u003eUSB Cable A-B for Arduino\u003c\/a\u003e\u003cbr\u003eMini USB cable\u003cbr\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27741075089,"sku":"TEL0092","price":5.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/esp8266-wifi-bee-arduino-compatible-dfrobot-tel0092-28601845350595.jpg?v=1646552167"},{"product_id":"adafruit-airlift-featherwing-a-esp32-wifi-co-processor-ada4264","title":"Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor","description":"\u003cp\u003eGive your Feather project a \u003cem\u003elift\u003c\/em\u003e with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Feather (\u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-feather-m4-express-featuring-atsamd51-ada3857\"\u003elike the Feather M4\u003c\/a\u003e) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS\/SSL encryption (it has root certificates pre-burned in).\u003c\/p\u003e\u003cp\u003eHaving WiFi managed by a separate chip means your code is simpler, you don't have to cache socket data, or compile in \u0026amp; debug an SSL library. Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer. You can use 3V or 5V Arduino, any chip from the ATmega328 or up, although the '328 will not be able to do very complex tasks or buffer a lot of data. It also works great with CircuitPython, a SAMD51\/Cortex M4 minimum required since we need a bunch of RAM. All you need is an SPI bus and 2 control pins plus a power supply that can provide up to 250mA during WiFi usage.\u003c\/p\u003e\u003cp\u003eWe placed an ESP32 module on a FeatherWing with a separate 3.3V regulator, and a tri-state chip for MISO so you can share the SPI bus with other 'Wings. Comes fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware that \u003ca href=\"https:\/\/github.com\/ladyada\/Adafruit_CircuitPython_ESP32SPI\"\u003eyou can use in CircuitPython to use this into  WiFi co-processsor over SPI + 2 pins\u003c\/a\u003e. We also toss in some headers so you can solder it in and plug into a doubler, but you can also pick up a set of stacking headers to stack above\/below your Feather.\u003c\/p\u003e\u003cp\u003eWe've tested this with all our Feathers and it should work just fine with them except the ESP8266 \u0026amp; ESP32 Feathers (cause they already have WiFi!). \u003cstrong\u003eFor use in Arduino\u003c\/strong\u003e, the '328 and '32u4 you can do basic connectivity and data transfer but they do not have a lot of RAM so we don't recommend them - use the M0, M4 or similar, for best results! \u003cstrong\u003eFor CircuitPython use\u003c\/strong\u003e, a Feather M4 or nRF52840 works best - the M0 series does not have enough RAM in CircuitPython.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/nina-fw\"\u003eThe firmware on board is a slight variant of the Arduino WiFiNINA core, which works great!\u003c\/a\u003e At this time connection to Enterprise WiFi is not yet supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-airlift-featherwing-esp32-wifi-co-processor-featherwing\/\"\u003eCheck out our learning system guide for schematics, files, and to get started AirLift'in' within minutes!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eProduct Dimensions: 50.0mm x 23.0mm x 5.0mm \/ 2.0\" x 0.9\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 0.1g \/ 0.0oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":19932911763518,"sku":"ADA4264","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-airlift-featherwing-esp32-wifi-co-processor-adafruit-ada4264-28610179072195.jpg?v=1646740090"},{"product_id":"adafruit-airlift-a-esp32-wifi-co-processor-breakout-board-ada4201","title":"Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board","description":"\u003cp\u003eGive your plain ol' microcontroller project a \u003cem\u003elift\u003c\/em\u003e with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite microcontroller (like the ATmega328 or ATSAMD51), awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS\/SSL encryption (it has root certificates pre-burned in).\u003c\/p\u003e\u003cp\u003eHaving WiFi managed by a separate chip means your code is simpler, you don't have to cache socket data, or compile in \u0026amp; debug an SSL library. Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer. You can use 3V or 5V Arduino, any chip from the ATmega328 or up, although the '328 will not be able to do very complex tasks or buffer a lot of data. It also works great with CircuitPython, a SAMD51\/Cortex M4 minimum required since we need a bunch of RAM. All you need is an SPI bus and 2 control pins plus a power supply that can provide up to 250mA during WiFi usage.\u003c\/p\u003e\u003cp\u003eWe placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices. Comes fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware that \u003ca href=\"https:\/\/github.com\/ladyada\/Adafruit_CircuitPython_ESP32SPI\"\u003eyou can use in CircuitPython to use this into a WiFi co-processsor over SPI + 2 pins\u003c\/a\u003e. We also toss in some header so you can solder it in and plug into a solderless breadboard.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/nina-fw\"\u003eThe firmware on board is a slight variant of the Arduino WiFiNINA core, which works great!\u003c\/a\u003e At this time connection to Enterprise WiFi is not yet supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-airlift-breakout\"\u003eCheck out our learning system guide for schematics, files, and to get started AirLift'in' within minutes!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eProduct Dimensions: 33.0mm x 31.8mm x 4.8mm \/ 1.3\" x 1.3\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 5.7g \/ 0.2oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":19932931719230,"sku":"ADA4201","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-airlift-esp32-wifi-co-processor-breakout-board-adafruit-ada4201-28609998061763.jpg?v=1646740098"},{"product_id":"grove-bee-socket","title":"Grove - Bee Socket","description":"\u003cp\u003eGrove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes of the Grove modules clearly.\u003c\/p\u003e\n\u003cp\u003eGrove-Bee Socket has similar functions to XBee Shield. Grove-Bee Socket and Arduino are connected by cables, and XBee Shield is a standard adapter that can plug to Arduino.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Bee Socket and Grove Interface\u003c\/li\u003e\n\u003cli\u003eOnboard 3.3V regulator to power your XBee\u003c\/li\u003e\n\u003cli\u003eLevel Shifting circuit\u003c\/li\u003e\n\u003cli\u003eReset Button for Bee modules\u003c\/li\u003e\n\u003cli\u003eLEDs for Bee operations\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct number: Seeed 103020002\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.seeedstudio.com\/document\/pdf\/Preface.pdf\" target=\"_blank\"\u003ePreface - Getting Started\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.seeedstudio.com\/document\/pdf\/Introduction%20to%20Grove.pdf\" target=\"_blank\"\u003eIntroduction to Grove\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.seeedstudio.com\/wiki\/Grove_-_Bee_Socket\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":20063082676286,"sku":"MMP-0976","price":5.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/grove-bee-socket-seeed-mmp-0976-40340537671875.jpg?v=1680520283"},{"product_id":"sparkfun-wifi-ir-blaster-esp8266","title":"SparkFun WiFi IR Blaster (ESP8266)","description":"\u003cp\u003eDo you want to control your TV via a web browser? Want to ask Alexa to mute your stereo? Want to schedule triggers to your IR-controlled LED strip? These are all applications that the WiFi IR Blaster is perfect for. The SparkFun WiFi IR Blaster is designed to connect all of those old, legacy IR-controlled devices to a WiFi network exposing them to a new method of control with the Internet of Things.\u003c\/p\u003e\n\u003cp\u003eThe WiFi IR Blaster combines an ESP8266 – a powerful WiFi\/microcontroller SoC – with IR emitters and receivers. With built-in WiFi support, the ESP8266 can be programmed to provide an interface between HTTP, MQTT, TCP, and infrared-controlled devices. This module equips the ESP8266 with a crystal, 4MB flash, and a PCB antenna – just about everything it needs to get going. Please be aware that the antenna sits under the SparkFun logo on the board, so try not to place anything that may interfere with WiFi signals near that area.\u003c\/p\u003e\n\u003cp\u003eThe IR emitter and detector components are packaged with the board, but not soldered in place. This allows you to solder both components at any angle your project requires. It also leaves the option to customize the board and spec out your own emitter and\/or receiver. So some soldering will be required to get the WiFi IR Blaster operational.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-wifi-ir-blaster-hookup-guide?_gl=1*t5hr4a*_ga*MTM0ODM3NjM5Ni4xNjk0MDk0MzAw*_ga_T369JS7J9N*MTY5NTg5NjQyNy4xNi4xLjE2OTU5MDMxMTguMjMuMC4w\u0026amp;_ga=2.220067609.1652722017.1695726563-1348376396.1694094300\"\u003eGet Started with the Sparkfun WIFI IR Blaster Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/mxKUskGUQk0?si=hE6aeZ86x4nyYPPl\u0026amp;start=35\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SparkFun WiFi IR Blaster\u003c\/li\u003e\n\u003cli\u003e1x LTE-302 IR Emitter\u003c\/li\u003e\n\u003cli\u003e1x TSOP382 IR Detector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/0\/2\/7\/7\/esp8266_ir_blaster.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/e\/d\/6\/e\/esp8266_ir_blaster.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-wifi-ir-blaster-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eDatasheets\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/1\/7\/ESP-12S_User_Manual.pdf\"\u003eESP-12S\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/1\/7\/LTE-302.pdf\"\u003eLTE-302\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/1\/7\/tsop382.pdf\"\u003eTSOP382\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/markszabo\/IRremoteESP8266\"\u003eArduino Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/mdhiggins\/ESP8266-HTTP-IR-Blaster\"\u003eFirmware\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/ESP8266_WiFi_IR_Blaster\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":39559658012867,"sku":"WRL-15031","price":21.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sparkfun-wifi-ir-blaster-esp8266-sparkfun-wrl-15031-40963637903555.jpg?v=1700911206"},{"product_id":"sparkfun-xbee-explorer-usb","title":"SparkFun XBee Explorer USB","description":"\u003cp\u003eThis is a simple to use, USB to serial base unit for the \u003ca href=\"\/collections\/vendors?q=Digi\" target=\"_blank\"\u003eDigi XBee line\u003c\/a\u003e. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.\u003c\/p\u003e\n\u003cp\u003eThe highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.\u003c\/p\u003e\n\u003cp\u003eThis board also breaks out each of the XBee’s I\/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThere is no XBee included with this Explorer USB.\u003c\/li\u003e\n\u003cli\u003eThis board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/Zigbee\/XBee-Explorer-v21b.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/Zigbee\/XBee-Explorer-v21b.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digi.com\/support\/productdetail?pid=3352\"\u003eX-CTU Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/tutorials\/257\"\u003eXBee Introduction and Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/exploring-xbees-and-xctu\"\u003eXBee and X-CTU Hookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/xbee-wifi-hookup-guide\"\u003eXBee WiFi Hookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/XBee_Explorer_USB\/tree\/V_2.1\"\u003eGitHub\u003c\/a\u003e (Design Files)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":39726972698819,"sku":"WRL-11812","price":31.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sparkfun-xbee-explorer-usb-sparkfun-wrl-11812-40963958243523.jpg?v=1695911888"},{"product_id":"sparkfun-xbee-explorer-dongle","title":"SparkFun XBee Explorer Dongle","description":"\u003cp\u003eThis is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The onboard voltage regulator is good up to 500mA.\u003c\/p\u003e\n\u003cp\u003eThe highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.\u003c\/p\u003e\n\u003cp\u003eThis board also breaks out each of the XBee’s I\/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThere is no XBee included with this Explorer Dongle.\u003c\/li\u003e\n\u003cli\u003eThis board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/Zigbee\/XBee-Explorer-Dongle-v23.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Wireless\/Zigbee\/XBee-Explorer-Dongle-v23.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digi.com\/support\/productdetail?pid=3352\"\u003eX-CTU Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/tutorials\/257\"\u003eXBee Introduction and Buying Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/exploring-xbees-and-xctu\"\u003eXBee and X-CTU Hookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/xbee-wifi-hookup-guide\"\u003eXBee WiFi Hookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/XBee_Explorer_Dongle\/tree\/V_2.3\"\u003eGitHub\u003c\/a\u003e (Design Files)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":39732733575363,"sku":"WRL-11697","price":31.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sparkfun-xbee-explorer-dongle-sparkfun-wrl-11697-40972761039043.jpg?v=1695976152"},{"product_id":"gravity-wifi-iot-module","title":"Gravity: WiFi IoT Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eThis WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on various popular IoT platforms like Easy IoT, IFFTTT, ThingSpeak, SIoT. Besides that, the module is designed with easy-to-use Gravity interface and employs UART and I2C communication protocols. You can use it to build IoT projects with other mainboards like \u003ca href=\"\/collections\/micro-bit-store\"\u003emicro:bit\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/collections\/arduino-store\" target=\"_blank\"\u003eArduino\u003c\/a\u003e, STM32, etc.\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupport Arduino IDE programming, MakeCode and Mind+ Graphical Programming\u003c\/li\u003e\n\u003cli\u003eI2C and UART Communication\u003c\/li\u003e\n\u003cli\u003eSupport Maincontroller Arduino, micro:bit, etc.\u003c\/li\u003e\n\u003cli\u003eSupport protocols like MQTT, HTTP, etc. Work well with IoT platforms EasyIoT, IFTTT, ThingSpeak, etc.\u003c\/li\u003e\n\u003cli\u003ePH2.0-4P Gravity Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply: 3.3V~5.5 V\u003c\/li\u003e\n\u003cli\u003eCommunication: I2C, UART\u003c\/li\u003e\n\u003cli\u003eWireless Mode: IEEE802.11b\/g\/n\u003c\/li\u003e\n\u003cli\u003eEncryption Type: WPA WPA2\/WPA2–PSK\u003c\/li\u003e\n\u003cli\u003eWiFi Frequency: 2.4GHz\u003c\/li\u003e\n\u003cli\u003eBuilt-in Protocol: TCP\/IP Protocol Stack\u003c\/li\u003e\n\u003cli\u003eDimension: 37 x 32mm\u003c\/li\u003e\n\u003cli\u003eSupported IoT Platforms: Easy IoT, IFFTTT, ThingSpeak, SIoT\u003c\/li\u003e\n\u003cli\u003eSupported Programming Platforms: Arduino IDE, MakeCode, Mind+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/WiFi_IoT_Module_SKU_TEL0126\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Gravity: WIFI IoT Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":39824774037699,"sku":"TEL0126","price":13.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gravity-wifi-iot-module-dfrobot-tel0126-40826580533443.jpg?v=1693301170"},{"product_id":"gravity-315mhz-rf-receiver-module","title":"Gravity: 315MHZ RF Receiver Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eThe 315MHz RF receiver module is widely used in the field of vehicle Telecontrol, access control system, identification, etc. Compared with traditional wired communication, RF radio has the advantage of higher flexibility and lower maintenance cost. \u003cbr\u003e \u003cbr\u003e DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip, with 8-bit three-state address coding switch, each one has three states: high level, low level, floating empty, so it supports up to 6,561 of the coding address. Modules can be used with SC2260, SC2262, PT2260, PT2262 and other coding chips, recommend our Remote Wireless Keyfob (315MHz)\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"desCon\"\u003eConnection Example - Gravity: I\/O Expansion Shield V7\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/315MHZ_RF_Receiver_Module_features_1.jpg?v=1693302707\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003ePower Supply: 3.3\/5v (MAX5.5V)\u003c\/li\u003e\n\u003cli\u003eModule Interface: PH2.0-3pin\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 315MHz\u003c\/li\u003e\n\u003cli\u003eModulation Mode: Ask\u003c\/li\u003e\n\u003cli\u003eDemodulation Mode: Superheterodyne type\u003c\/li\u003e\n\u003cli\u003eSensitivity: Typical -108 dBi\u003c\/li\u003e\n\u003cli\u003eTransfer Rate: Maximum 9.6kbps\u003c\/li\u003e\n\u003cli\u003eReceive bandwidth: ±1.25MHz (6dB)\u003c\/li\u003e\n\u003cli\u003eAntenna Impedance: 50 ohms\u003c\/li\u003e\n\u003cli\u003eRF chip: LR480\u003c\/li\u003e\n\u003cli\u003eDecoding Chip: SC2272-L4 latch type\u003c\/li\u003e\n\u003cli\u003eTransmission Distance: 50 m (5V Power)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 0~+70\u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"desCon\"\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/Gravity__315MHZ_RF_Receiver_Module_SKU__TEL0112\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Gravity: 315MHZ RF Receiver Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":39824774234307,"sku":"TEL0112","price":5.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gravity-315mhz-rf-receiver-module-dfrobot-tel0112-40826612252867.jpg?v=1693303509"},{"product_id":"sparkfun-micromod-wifi-function-board-da16200","title":"SparkFun MicroMod WiFi Function Board - DA16200","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"description-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eThe SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC, Lumped RF filter, 4MB flash memory, and an on-board chip antenna to any \u003ca href=\"\/search?q=micromod\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\" title=\"SparkFun MicroMod\"\u003eMicroMod\u003c\/a\u003e project. With the addition of JTAG connectors for deep dive programming, you've got everything you need to get your MicroMod setup ready for your next IoT project.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun MicroMod DA16200 Function Board is ideal for MicroMod projects involving door locks, thermostats, sensors, pet trackers, and other home IoT projects, thanks in part to the multiple sleep modes that allow you to take advantage of current draws as low as 0.2uA-3.5uA.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the DA16200 module's certified WiFi alliance for IEEE802.11b\/g\/n, WiFi Direct, and WPS functionalities means that it has been approved for use by multiple countries and using the WiFi Alliance transfer policy, each WiFi Certification can be transferred without being tested again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A MicroMod Processor and Main Board are not included with this MicroMod WiFi Function Board. These boards will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/micromod-wifi-function-board---da16200-hookup-guide\"\u003eGet Started with the Micromod DA16200 Wifi Function Board Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/GeeHryO9D8k?si=SYQ4QeeaESn63bHI\u0026amp;start=352\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"features-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eArm® Cortex®-M4F core w\/ clock frequency of 30~160 MHz\u003c\/li\u003e\n\u003cli\u003eWiFi processor\n\u003cul\u003e\n\u003cli\u003eIEEE 802.11b\/g\/n, 1x1, 20MHz channel bandwidth, 2.4GHz\u003c\/li\u003e\n\u003cli\u003eIEEE 802.11s Wi-Fi mesh\u003c\/li\u003e\n\u003cli\u003eWiFi security: WPA\/WPA2-Enterprise\/Personal, WPA2 SI, WPA3 SAE, and OWE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e32 M-bit \/ 4 M-byte SPI flash Memory\u003c\/li\u003e\n\u003cli\u003e2 UARTs\u003c\/li\u003e\n\u003cli\u003eOn-Chip RTC\u003c\/li\u003e\n\u003cli\u003eThree ultra-low power sleep modes\u003c\/li\u003e\n\u003cli\u003eSleep current: 3.5uA\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 2.1V to 3.6V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"documents-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eHardware Documentation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/7\/b\/7\/8\/SparkFun_MicroMod_DA16200_Function.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/9\/2\/a\/0\/18594_DA16200-FunctionBoard-EagleFiles.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/6\/3\/c\/8\/BoardOutline.png\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2061\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/how-to-install-ch340-drivers\"\u003eCH340 Drivers\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/5\/9\/7\/Windows-CH340-Driver.zip\"\u003eWindows\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/4\/4\/CH341SER_MAC.ZIP\"\u003eMax OSX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/2\/0\/6\/1\/AP2112.pdf\"\u003eDatasheet\u003c\/a\u003e (AP2112)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/c\/e\/7\/6\/1\/DA16200MOD_Datasheet_Rev3v1.pdf\"\u003eDatasheet\u003c\/a\u003e (DA16200)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/9\/9\/1\/UM-WI-003_DA16200_AT-Command_User_Manual_Rev_2v3.pdf\"\u003eAT Command User Manual\u003c\/a\u003e (DA16200)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ftdichip.com\/Drivers\/CDM\/CDM21224_Setup.zip\"\u003eDownload AT Firmware\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dialog-semiconductor.com\/products\/wi-fi\/da16200\"\u003eDialog Resources\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/MicroMod_DA16200_Function\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMicroMod Documentation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"SparkFun MicroMod\" href=\"\/collections\/sparkfun-micromod\"\u003eFull MicroMod Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-micromod\"\u003eGetting Started with MicroMod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/designing-with-micromod\"\u003eDesigning with MicroMod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/micromod\"\u003eMicroMod Info Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=180\"\u003eMicroMod Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":41135577366723,"sku":"WRL-18594","price":23.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sparkfun-micromod-wifi-function-board-da16200-sparkfun-wrl-18594-40993932116163.jpg?v=1696420568"},{"product_id":"sparkfun-micromod-wifi-function-board-esp32","title":"SparkFun MicroMod WiFi Function Board - ESP32","description":"\u003cdiv id=\"description-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eThe SparkFun MicroMod ESP32 Function Board adds additional wireless options to \u003ca title=\"SparkFun MicroMod\" href=\"\/collections\/sparkfun-micromod\"\u003eMicroMod Processor Boards\u003c\/a\u003e that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.\u003c\/p\u003e\n\u003cp\u003eAt the core of the ESP32 WROOM module is the ESP32-D0WD-V3 chip which is designed to be both scalable and adaptive. ESP32 WROOM module on this board features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 b\/g\/n WiFi transceiver, and dual-mode Bluetooth capabilities. Utilizing our handy M.2 MicroMod connector, no soldering is required to connect it to your system. Simply match up the key on your processor and function board's bevelled edge connector to their respective key on the M.2 connector, then secure them to the mainboard with screws. The ESP32 WROOM module can then be controlled using AT commands via the serial UART port.\u003c\/p\u003e\n\u003cp\u003eThe ESP32 Function Board comes pre-flashed with AT-command firmware and acts as a serial-to-WiFi gateway. Next to the module is a USB-C connector and CP2102 USB-to-serial converter. Whether you want to add AT commands of your own, or flash custom firmware on the ESP32, you can use this port to reprogram the ESP32.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A MicroMod Processor and Main Board are not included with this MicroMod WiFi Function Board. These boards will need to be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/micromod-wifi-function-board---esp32-hookup-guide\"\u003eGet Started with the Micromod ESP32 Function Board\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GeeHryO9D8k?si=vqXL2t0jvmfZcDTO\u0026amp;start=310\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv id=\"features-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage Range\n\u003cul\u003e\n\u003cli\u003e2.5V to 6.0V\n\u003cul\u003e\n\u003cli\u003eTyp. \u003cstrong\u003e5V\u003c\/strong\u003e via Main Board's USB Connector\u003c\/li\u003e\n\u003cli\u003eTyp. \u003cstrong\u003e~3.7V to 4.2V\u003c\/strong\u003e via Main Board's LiPo Battery Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIO Voltage\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Type C Connector\u003c\/li\u003e\n\u003cli\u003eCP2102 USB-to-Serial Converter\u003c\/li\u003e\n\u003cli\u003eAP2112 3.3V Voltage Regulator (Rated 600mA)\u003c\/li\u003e\n\u003cli\u003eESP32-WROOM-32E Module\u003csup\u003e1\u003c\/sup\u003e\n\u003cul\u003e\n\u003cli\u003eXtensa® dual-core 32-bit LX6 microprocessor\u003c\/li\u003e\n\u003cli\u003eUp to 240MHz clock frequency\u003c\/li\u003e\n\u003cli\u003e16MB of flash storage\u003c\/li\u003e\n\u003cli\u003e520kB internal SRAM\u003c\/li\u003e\n\u003cli\u003eIntegrated 802.11 b\/g\/n WiFi transceiver\u003c\/li\u003e\n\u003cli\u003eIntegrated dual-mode Bluetooth® (classic and BLE)\u003c\/li\u003e\n\u003cli\u003eHardware accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003c\/li\u003e\n\u003cli\u003e2.5 µA deep sleep current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eButtons\n\u003cul\u003e\n\u003cli\u003eReset\u003c\/li\u003e\n\u003cli\u003eBoot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower LED\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Pull-Up Resistors\u003c\/li\u003e\n\u003cli\u003eJumpers\n\u003cul\u003e\n\u003cli\u003ePWR LED\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Pull-Up Resistors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ci\u003e\u003csup\u003e1 Note: The ESP32 WROOM is flashed with AT command firmware and controlled via the serial UART port.\u003c\/sup\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv id=\"documents-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eHardware Documentation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/0\/f\/b\/e\/b\/MicroMod_WiFi_Function_Board_ESP32_Schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/c\/b\/0\/1\/6\/MicroMod_WiFi_Function_Board-ESP32.zip\"\u003eBoard Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/f\/8\/b\/e\/MicroMod_WiFi_Function_Board_ESP32_Board_Dimensions.png\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1998\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.silabs.com\/developers\/usb-to-uart-bridge-vcp-drivers#software\"\u003eSilicon Labs CP210X Drivers\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/5\/2\/CP210x_Universal_Windows_Driver.zip\"\u003eWindows\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.silabs.com\/documents\/public\/software\/Mac_OSX_VCP_Driver.zip\"\u003eMax OSX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/3\/1\/1\/c\/DS-17830-ESP32_WROOM_MCU_Module_-_16MB__Chip_Antenna_.pdf\"\u003eDatasheet\u003c\/a\u003e (ESP32-WROOM-32E)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.espressif.com\/projects\/esp-at\/en\/latest\/AT_Command_Set\/index.html\"\u003eReadTheDocs: ESP32 AT Command Set\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.espressif.com\/projects\/esp-at\/en\/latest\/Get_Started\/Downloading_guide.html\"\u003eAT Firmware Downloading Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.espressif.com\/projects\/esp-at\/en\/latest\/AT_Binary_Lists\/ESP32_AT_binaries.html#esp32-wroom-32-series\"\u003eESP32-WROOM AT Firmware\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_WiFi_Function_Board_ESP32\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMicroMod Documentation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/sparkfun-micromod\" title=\"SparkFun MicroMod\"\u003eFull MicroMod Range\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-micromod\"\u003eGetting Started with MicroMod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/designing-with-micromod\"\u003eDesigning with MicroMod\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/micromod\"\u003eMicroMod Info Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=180\"\u003eMicroMod Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":41135577858243,"sku":"WRL-18430","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sparkfun-micromod-wifi-function-board-esp32-sparkfun-wrl-18430-40994229158083.jpg?v=1696424171"},{"product_id":"self-powered-wireless-switch-433mhz","title":"Self-powered Wireless Switch (433Mhz)","description":"\u003cp\u003eRemote controllers can be seen everywhere, and most of them are inseparable from a battery. However, we often encounter problems when using batteries, for instance, it can be troublesome to replace batteries, batteries are easy to corrode in a humid environment, and waste batteries may cause serious environmental pollution.\u003c\/p\u003e \u003cp\u003eDid you know that wireless remote control can actually work without batteries?!\u003c\/p\u003e \u003cp\u003eThis self-powered wireless switch from DFRobot can send signals wirelessly without installing a battery. The switch is composed of a micro-generator and a 433Mhz radio frequency circuit. Based on the principle of electromagnetic induction, the micro generator converts the kinetic energy of the press into electrical energy that will be rectified and stored by the RF circuit later, by which a signal can be transmitted wirelessly. It is suitable as a maintenance-free switch for long-term monitoring of changes in the state of pressing, collisions, etc, such as making wireless doorbells, pagers, food ordering devices and wall switches.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eA receiver is required when using this product\u003c\/strong\u003e. DFRobot recommends the \u003ca href=\"\/products\/gravity-digital-wireless-receive-switch-433mhz\"\u003eGravity: Digital Wireless Switch Receiver (433MHz)\u003c\/a\u003e, or other receivers that support EV1527 decoding format and 10Kbps decoding rate.\u003c\/p\u003e \u003ch2\u003eImportant Notes\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eAfter the module is connected to the DC power supply, do not press the power push button as the generated excessive energy may damage the chip\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eWhen pressing the power generation button or using DC power, at least one of the dip switches on the module must be dialled up or the chip may be damaged\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eNo battery needed, maintenance-free\u003c\/li\u003e \u003cli\u003eWireless signal, wiring-free\u003c\/li\u003e \u003cli\u003eRF signal, strong penetration\u003c\/li\u003e \u003cli\u003eOnboard 4-position DIP switch, adjustable 15 states\u003c\/li\u003e \u003cli\u003e1 million sets of random address codes\u003c\/li\u003e \u003cli\u003eLifetime of 100,000 presses\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eWorking Frequency: 433Mhz\u003c\/li\u003e \u003cli\u003eTransmission Rate: 10kbps\u003c\/li\u003e \u003cli\u003eEncoding Format: EV1527\u003c\/li\u003e \u003cli\u003eOutput Power: 13dBm\u003c\/li\u003e \u003cli\u003eModulation Method: OOK\u003c\/li\u003e \u003cli\u003ePower Generation Energy: 600uJ\u003c\/li\u003e \u003cli\u003eModule Size: 47x25x11mm(L*W*H)\/1.85x0.98x0.43”\u003c\/li\u003e \u003cli\u003ePress Down Force: Typical 1800g\u003c\/li\u003e \u003cli\u003eAction Method: Automatically rebound after pressing down\u003c\/li\u003e \u003cli\u003eAction Distance: 2.6mm (endpoint)\u003c\/li\u003e \u003cli\u003ePress Frequency: no more than 4 times per second, continuously rapid press will cause energy accumulation that cannot be consumed in time, and eventually burn the chip\u003c\/li\u003e \u003cli\u003eStable Transmission Distance: Indoor 40M\u003c\/li\u003e \u003cli\u003eDistance Test Condition: Straighten the wire antenna of the transmitting module, and for the receiving module, use [Gravity: Digital wireless switch receiver(433MHz)]\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/SKU_TEL0146_Self-Powered_Wireless_Switch_433Mhz\"\u003eProduct wiki\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/nobody\/wiki\/985c65885707af1633e3771f4460e0af.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/nobody\/wiki\/dee5331b715fe6db94fce443764d7336.pdf\"\u003ePCB Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/nobody\/wiki\/dc6ed23243e3a12dfd8e99172454ed80.pdf\"\u003eModule Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":41836221595843,"sku":"TEL0146","price":8.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/self-powered-wireless-switch-433mhz-dfrobot-tel0146-36126653579459.jpg?v=1652981391"},{"product_id":"uart-to-wifi-and-ethernet-module","title":"UART to WiFi and Ethernet Module (Modbus\/MQTT Gateway)","description":"\u003cp\u003eThis 802.11b\/g\/n module has different connectivity options, including a TTL serial port, WiFi, and ethernet for bi-directional transparent transmission. It has several functions, such as a serial server, Modbus gateway, MQTT gateway, and UART to HTTPD Client, providing quick WiFi network access for traditional serial port devices or MCU control devices. Compact and easy to install, this module is ideal for data acquisition, IoT gateway functions, and safety \u0026amp; security IoT applications.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEmbedded Design\u003c\/li\u003e\n\u003cli\u003eUART to WIFI\/ETH\u003c\/li\u003e\n\u003cli\u003eMulti Transparent Transmission Modes\u003c\/li\u003e\n\u003cli\u003eHTTPD\/MQTT\u003c\/li\u003e\n\u003cli\u003eModbus Gateway\u003c\/li\u003e\n\u003cli\u003eHost\/Webpage\/Serial Configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"889\" style=\"height: 724.582px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd width=\"286\" style=\"height: 19.5833px;\"\u003ePower supply\u003c\/td\u003e\n\u003ctd width=\"603\" style=\"height: 19.5833px;\"\u003eDC 3.3V (±5%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003ePower supply method\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003ePin header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e(L × W × H)\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e25.00 x 40.00 x 8.00mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eCommunication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1667px;\"\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003eEthernet\u003c\/td\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003e10 \/ 100M auto-negotiation (Connection via pin header)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eWIFI\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e802.11b\/g\/n compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eSerial port\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eEmbedded\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eUART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eWireless Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eFrequency Band\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e2.412 ~ 2.484 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eWireless network\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eStation \/ AP \/ AP+Station Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eSecurity mechanism\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eWPA-PSK \/ WPA2-PSK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eEncryption type\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eTKIP \/ AES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eTransmitting power\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e802.11b: +19dBm (Max.@11Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e802.11g: +18dBm (Max.@54Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1667px;\"\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003e802.11n: +17dBm (Max.@HT20, MCS7); +17dBm (Max.@HT40, MCS7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eReceiving sensitivity\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e802.11b: -89dBm (@11Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e802.11g: -81dBm (@54Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1667px;\"\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003e802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eSerial Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eBaudrate\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e300 ~ 460800 bps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eParity bit\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eNone, odd, even, mark, space\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eData bit\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e5 ~ 9 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eFlow control\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eRTS\/CTS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eSOFTWARE\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eProtocol\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eTCP \/ UDP \/ ARP \/ ICMP \/ DHCP \/ DNS \/ HTTP \/ MQTT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eConfiguration\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eHost, web browser, serial AT command\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eCommunication method\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eTCP\/IP direct communication, VCOM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1667px;\"\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003eOperating mode\u003c\/td\u003e\n\u003ctd style=\"height: 39.1667px;\"\u003eTransparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003cstrong\u003eEnvironment Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eOperating temperature\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e-40℃ ~ 85℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5833px;\"\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003eHumidity range\u003c\/td\u003e\n\u003ctd style=\"height: 19.5833px;\"\u003e5% ~ 95% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/UART-WIFI232-B2\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/upload\/b\/b9\/UART-WIFI232-B2%3DUser-Manual-EN.pdf\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/UART_To_WiFi_And_Ethernet_Module_features_1.jpg?v=1714048728\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x UART To WiFi And Ethernet Module\u003c\/li\u003e\n\u003cli\u003e1x IPX 2.4G 2DB Antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43308972736707,"sku":"WAV-25116","price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/uart-to-wifi-and-ethernet-module-the-pi-hut-wav-25116-42056935080131.jpg?v=1714060355"},{"product_id":"rm2-wireless-bluetooth-breakout-sp-ce","title":"RM2 Wireless \u0026 Bluetooth Breakout (SP\/CE)","description":"\u003cp\u003eAdd 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module.\u003c\/p\u003e\n\u003cp\u003eThe RM2 uses the same two-in-one wireless and Bluetooth module that's found on \u003ca href=\"\/products\/raspberry-pi-pico-2-w\" title=\"Raspberry Pi Pico 2 W\"\u003eRaspberry Pi Pico W\u003c\/a\u003e, making it easy to use directly with any RP2040 or RP2350 board.\u003c\/p\u003e\n\u003cp\u003eThis breakout has an SP\/CE connector on board so you can connect it easily to any SP\/CE compatible microcontroller (like \u003ca href=\"\/products\/pimoroni-pico-plus-2\" title=\"Pimoroni Pico Plus 2\"\u003ePimoroni Pico Plus 2\u003c\/a\u003e) or add-on using a handy cable (of course, there are also pads if you'd prefer to solder wires to it).\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/search?q=SP%2FCE\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\" title=\"SP\/CE\"\u003eClick here\u003c\/a\u003e to view all things SP\/CE!\u003c\/p\u003e\n\u003cp\u003eThe Host and SP\/CE cables are \u003cstrong\u003eNOT \u003c\/strong\u003eincluded but \u003ca href=\"\/products\/8-pin-jst-sh-cable-sp-ce\"\u003eclick here\u003c\/a\u003e to see the cables we have in the store.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: By default, the BL_ON pin is wired to the WL_ON pin. There is a cuttable trace on the rear of the board if your project needs these to be disconnected.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi RM2 module (\u003ca href=\"https:\/\/www.infineon.com\/cms\/en\/product\/wireless-connectivity\/airoc-wi-fi-plus-bluetooth-combos\/wi-fi-4-802.11n\/cyw43439\/\" rel=\"noopener\" target=\"_blank\"\u003eCYW43439\u003c\/a\u003e), supporting IEEE 802.11 b\/g\/n wireless LAN, and Bluetooth\u003c\/li\u003e\n\u003cli\u003eSP\/CE connector (8-pin JST-SH)\u003c\/li\u003e\n\u003cli\u003e0.1\" headers (\u003ca href=\"\/collections\/solderless-breadboards\" title=\"Solderless Breadboards\"\u003ebreadboard compatible\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/products\/raspberry-pi-pico-w\" title=\"Raspberry Pi Pico W\"\u003eRaspberry Pi Pico\u003c\/a\u003e \/ Pico 2 \/ RP2040 \/ RP2350\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInput voltage: 3.0 - 3.3V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDimensions: 23.8 x 20.4 x 4.7 mm (L x W x H)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eYou can use RM2 Breakout with Raspberry Pi Pico (or other RP2040 or RP2350-based microcontrollers) using our custom MicroPython build that allows for pin re-assignment. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico-rp2350\/releases\/\" rel=\"noopener\" target=\"_blank\"\u003eDownload pirate brand MicroPython for RP2350 boards (with experimental wireless support)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eBuilds for Pico \/ RP2040 are coming soon!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico-rp2350\/blob\/main\/micropython\/examples\/pico_plus_2\/breakouts\/rm2-breakout-catfacts.py\" rel=\"noopener\" target=\"_blank\"\u003eMicroPython example\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll need to set the pins that the module is connected to before you do anything with the network. On a\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"\/products\/pimoroni-pico-plus-2\" target=\"_blank\"\u003ePimoroni Pico Plus 2\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(with an RM2 breakout connected via SP\/CE cable), that would look like this:\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003ewlan = network.WLAN(network.STA_IF, pin_on=32, pin_out=35, pin_in=35, pin_wake=35, pin_clock=34, pin_cs=33)\u003c\/code\u003e\u003c\/p\u003e\n\u003cp\u003eAlternatively, if you have an RP2040 or RP2350 board that exposes GP23, GP24, GP25, and GP29 (such as\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"\/products\/pga2040\" title=\"PGA2040\" target=\"_blank\"\u003ePGA2040\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"\/products\/pga2350\" title=\"PGA2350\" target=\"_blank\"\u003ePGA2350\u003c\/a\u003e) you can wire the module up to the default Pico W pins and you won't need to do any pin configuration. The pins are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWL_ON -\u0026gt; GP23\u003c\/li\u003e\n\u003cli\u003eDAT -\u0026gt; GP24\u003c\/li\u003e\n\u003cli\u003eCS -\u0026gt; GP25\u003c\/li\u003e\n\u003cli\u003eCLK -\u0026gt; GP29\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/rm2_breakout_pinout_diagram.pdf?v=1729266242\"\u003ePinout PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/RM2_Breakout_Schematic.pdf?v=1729267876\" rel=\"noopener\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RM2_Wireless_Bluetooth_Breakout_features_1.jpg?v=1733403147\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x RM2 Wireless \u0026amp; Bluetooth Breakout\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":53798389547393,"sku":"PIM730","price":9.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/rm2-wireless-bluetooth-breakout-sp-ce-pimoroni-pim730-72481591329153.jpg?v=1733454836"},{"product_id":"raspberry-pi-rmc20452t-radio-module","title":"Raspberry Pi Radio Module 2","description":"\u003cp\u003eRaspberry Pi Radio Module 2 (RM2) is intended to provide easy-to-integrate radio functionality for OEM products or your own PCB designs, originally designed for use with Raspberry Pi’s low-cost, high-performance microcontrollers such as the \u003ca href=\"\/products\/raspberry-pi-pico-2-w\" title=\"Raspberry Pi Pico 2 W\"\u003eRaspberry Pi Pico 2 W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIt uses Infineon’s \u003ca href=\"https:\/\/www.infineon.com\/cms\/en\/product\/wireless-connectivity\/airoc-wi-fi-plus-bluetooth-combos\/wi-fi-4-802.11n\/cyw43439\/\" rel=\"noopener\" title=\"CYW43439\" target=\"_blank\"\u003eCYW43439\u003c\/a\u003e, a single-chip combo device featuring 1x1 \u003cstrong\u003esingle-band 2.4GHz Wi-Fi® 4 (802.11n)\u003c\/strong\u003e and \u003cstrong\u003eBluetooth® 5.2\u003c\/strong\u003e for low-cost applications.\u003c\/p\u003e\n\u003cp\u003eIt is a small form-factor solution with minimal external components for reduced mass production costs. The radio module has \u003cstrong\u003ecastellated edge pads\u003c\/strong\u003e to allow for a variety of mounting options, and features an \u003cstrong\u003eon-board single 2.4GHz antenna\u003c\/strong\u003e for ease of design. It has \u003cstrong\u003efull modular certification\u003c\/strong\u003e, making integration straightforward with regard to regulatory compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as individual units\u003c\/strong\u003e (cut from a tape \u0026amp; reel and packaged into an anti-static bag). \u003cstrong\u003eNeed bulk quantities, or even a full 960-piece reel?\u003c\/strong\u003e Head over to our \u003ca href=\"https:\/\/business.thepihut.com\/products\/raspberry-pi-rmc20452T-radio-module\" rel=\"noopener\" title=\"The Pi Hut Business\" target=\"_blank\"\u003eBusiness site\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCastellated package for easy integration\u003c\/li\u003e\n\u003cli\u003eSingle-band 2.4GHz Wi-Fi 4\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2\u003c\/li\u003e\n\u003cli\u003eFCC modular conformance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWi-Fi support:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi 4 (802.11n), single-band (2.4 GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth support:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBluetooth 5.2\u003cbr\u003eBluetooth Classic and Bluetooth Low Energy (LE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFull software compatibility with Pico W and Pico 2 W SDK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSimple GPIO expander:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree host-controlled GPIOs for added I\/O capabilities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimal I\/O overhead:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-pin-count qSPI host interface allows for simplified integration with minimal I\/O requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSingle-antenna design:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSISO\u003csup\u003e1\u003c\/sup\u003e configuration supports efficient single-antenna wireless performance\u003cbr\u003eWi-Fi and Bluetooth can coexist with a shared antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated internal PA and LNA for signal range and reliability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeed:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupports 20 MHz channels with data rates up to 96 Mbps (PHY rate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth range:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSupports up to 100 m (Class 1) and 10 m (Class 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−30°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLow power consumption:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIEEE Power Save PM1 DITM1 average rate 1: 1.19 mA\u003cbr\u003eReceive active rate MCS7 (at −50 dBm): 43 mA\u003cbr\u003eTransmit active rate MCS7 (at 16 dBm): 271 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMechanical characteristics:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21-pad castellated package\u003cbr\u003e16.5 mm × 14.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDatasheet:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor full product specifications, including footprint and reference schematics, please see the \u003ca title=\"Raspberry Pi Radio Module 2 datasheet\" href=\"https:\/\/datasheets.raspberrypi.com\/rm2\/rm2-datasheet.pdf\"\u003edatasheet\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRMC20452T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRaspberry Pi Radio Module 2 will remain in production until at least January 2036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompliance:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor a full list of local and regional product approvals, please visit \u003ca href=\"https:\/\/pip.raspberrypi.com\" rel=\"noopener\" title=\"pip.raspberrypi.com\" target=\"_blank\"\u003epip.raspberrypi.com\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/raspberry-pi-radio-module-2-available-now-at-4\/\" title=\"Raspberry Pi Radio Module 2 announcement\" rel=\"noopener\" target=\"_blank\"\u003eAnnouncement blog post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/rm2\/rm2-product-brief.pdf\" title=\"Raspberry Pi Radio Module 2 product brief\" rel=\"noopener\" target=\"_blank\"\u003eProduct brief\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Raspberry Pi RMC20452T datasheet\" href=\"https:\/\/datasheets.raspberrypi.com\/rm2\/rm2-datasheet.pdf\" target=\"_blank\"\u003eRaspberry Pi RMC20452T datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e RMC20452T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Raspberry Pi SC1169\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5056561805894\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Japan (JP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi Radio Module 2 (RM2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54441561293185,"sku":"SC1169","price":3.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-radio-module-2-raspberry-pi-sc1169-1175933621.jpg?v=1751273841"},{"product_id":"bc01-indoor-bluetooth-beacon-for-sensecap-t1000-tracker","title":"BC01 Indoor Bluetooth Beacon for SenseCAP T1000 Tracker","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/sensecap\" title=\"SenseCAP\"\u003eSenseCAP\u003c\/a\u003e \u003cstrong\u003eIndoor Bluetooth Location Beacon\u003c\/strong\u003e is a compact \u003cstrong\u003eBluetooth Low Energy (BLE)\u003c\/strong\u003e device designed to enable accurate indoor positioning and asset tracking when used with the \u003ca href=\"\/products\/sensecap-t1000-b-lorawan-tracker-no-sensors\" title=\"SenseCAP T1000 Tracker\"\u003eSenseCAP T1000 Tracker\u003c\/a\u003e. By transmitting BLE signals at set intervals, the beacon allows BLE-enabled devices to determine their proximity and build precise, location-based systems.\u003c\/p\u003e \u003cp\u003eIdeal for scenarios where GPS fails - such as indoors - this beacon enables metre-level positioning (typically 2–3 metres) by placing multiple units across the environment. This allows for reliable tracking of assets, route guidance, and applications like reverse vehicle locating, all of which can be integrated into mobile apps or embedded systems.\u003c\/p\u003e \u003cp\u003eThe beacon is equipped with \u003cstrong\u003eBluetooth 5.0\u003c\/strong\u003e, offers a transmission \u003cstrong\u003erange of up to 120 metres in open areas\u003c\/strong\u003e, and runs on a \u003cstrong\u003ereplaceable 2400mAh lithium battery\u003c\/strong\u003e \u003cstrong\u003ewith a lifespan of over 5 years\u003c\/strong\u003e (under default 0dBm\/500ms configuration). It \u003cstrong\u003esupports iBeacon protocol\u003c\/strong\u003e and is compatible with Android 4.3+ and iOS 7.0+ systems. Additional features include an \u003cstrong\u003eonboard LED\u003c\/strong\u003e and configuration via \u003ca href=\"https:\/\/sensecraft.seeed.cc\/\" target=\"_blank\" rel=\"noopener\" title=\"SenseCraft\"\u003eSenseCraft\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eHoused in a white polycarbonate enclosure, the unit measures 50 × 20.5 mm and weighs 39g including the battery. Power control is manual via a concealed button under the back cover. Operating temperature is rated for -30°C to +60°C.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSenseCAP T1000 Tracker card not included.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/BC01_Indoor_Bluetooth_Beacon_for_SenseCAP_T1000_Tracker_network_map.jpg\" width=\"1000\" height=\"235\" alt=\"\"\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. \u003ca href=\"https:\/\/thepihut.com\/pages\/lithium-shipping\" target=\"_blank\" rel=\"noopener\"\u003eWhy?\u003c\/a\u003e\u003c\/p\u003e \u003chr\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBluetooth® LE 5.0 support\u003c\/li\u003e \u003cli\u003eIndoor positioning accuracy of 2–3 metres with SenseCAP T1000 Tracker \u003cstrong\u003e(not included)\u003c\/strong\u003e\n\u003c\/li\u003e \u003cli\u003eOver 5 years battery life (0dBm \/ 500ms default configuration)\u003c\/li\u003e \u003cli\u003eTransmission range up to 120 metres in open areas\u003c\/li\u003e \u003cli\u003eCompatible with iOS 7.0\u003cstrong\u003e+\u003c\/strong\u003e and Android 4.3\u003cstrong\u003e+\u003c\/strong\u003e systems\u003c\/li\u003e \u003cli\u003ePowered by a replaceable 2400mAh lithium battery\u003c\/li\u003e \u003cli\u003eCompact size: 50mm diameter, 20.5mm height\u003c\/li\u003e \u003cli\u003eSimple power on\/off using rear button and LED indicator\u003c\/li\u003e \u003cli\u003eWorks with the SenseCraft App\u003c\/li\u003e \u003cli\u003eOperating temperature range: -30°C to +60°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eChip\u003c\/td\u003e \u003ctd\u003enRF52 series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBluetooth protocol\u003c\/td\u003e \u003ctd\u003eBLE 5.0\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBroadcasting range\u003c\/td\u003e \u003ctd\u003e120m\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTx Power\u003c\/td\u003e \u003ctd\u003e-30～+4dBm, default is 0dBm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eAdv Interval\u003c\/td\u003e \u003ctd\u003e100ms～10s, default is 500ms\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBattery\u003c\/td\u003e \u003ctd\u003eLithium battery, 2400mAh\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWorking temperature\u003c\/td\u003e \u003ctd\u003e-30~60°C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimension (L×W×H)\u003c\/td\u003e \u003ctd\u003eΦ50×20.5mm\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/files.seeedstudio.com\/products\/SenseCAP\/T1000_Tracker\/BC01_Indoor_Bluetooth_Beacon.pdf\" target=\"_blank\" rel=\"noopener\" title=\"Specification and guide\"\u003eSpecification and guide\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x BC01 Indoor Bluetooth Beacon (for SenseCAP T1000 Tracker)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSenseCAP T1000 Tracker card not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":54463384846721,"sku":"106412","price":11.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/bc01-indoor-bluetooth-beacon-for-sensecap-t1000-tracker-seeed-106412-1177166096.jpg?v=1752080234"},{"product_id":"sensecap-bc03-indoor-bluetooth-beacon-for-tracker","title":"SenseCAP BC03 Indoor Bluetooth Beacon for Tracker","description":"\u003cp\u003eThe \u003ca title=\"Seeed Products\" href=\"\/collections\/seeed\"\u003eSeeed\u003c\/a\u003e \u003cstrong\u003eSenseCAP BC03 Indoor Bluetooth Beacon\u003c\/strong\u003e is a \u003cstrong\u003ecompact wireless beacon\u003c\/strong\u003e designed to support indoor positioning and asset tracking applications.\u003c\/p\u003e\n\u003cp\u003eBy transmitting Bluetooth signals at regular intervals, the BC03 allows compatible Bluetooth-enabled devices, such as the \u003ca title=\"BC01 Indoor Bluetooth Beacon for SenseCAP T1000 Tracker\" href=\"\/products\/bc01-indoor-bluetooth-beacon-for-sensecap-t1000-tracker\"\u003eSenseCAP T1000 Tracker\u003c\/a\u003e and T2000 Tracker, to detect proximity and determine location within indoor environments.\u003c\/p\u003e\n\u003cp\u003eIdeal for warehouses, offices, retail spaces, and smart buildings, the BC03 helps create reliable location-based solutions where GPS signals may be limited or unavailable. Its low-power Bluetooth operation and compact form factor make it easy to deploy across a wide range of indoor tracking and monitoring applications.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/106873.jpg?v=1778152317\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. \u003ca href=\"https:\/\/thepihut.com\/pages\/lithium-shipping\" target=\"_blank\"\u003eWhy?\u003c\/a\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth® LE 5.0 connectivity\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor positioning, asset tracking, and location-based applications\u003c\/li\u003e\n\u003cli\u003eCompatible with SenseCAP T1000 Tracker and T2000 Tracker\u003c\/li\u003e\n\u003cli\u003eUp to 130m transmission range in open areas\u003c\/li\u003e\n\u003cli\u003eMore than 5 years battery life (0dBm \/ 500ms default configuration)\u003c\/li\u003e\n\u003cli\u003eReplaceable Li\/SOCl2 battery\u003c\/li\u003e\n\u003cli\u003eHigh-gain omni-directional BLE antenna for stable communication\u003c\/li\u003e\n\u003cli\u003eImproved RSSI consistency for better indoor positioning accuracy\u003c\/li\u003e\n\u003cli\u003eMeter-level indoor positioning accuracy (approximately 2–3m)\u003c\/li\u003e\n\u003cli\u003eConfigurable advertising interval and transmit power\u003c\/li\u003e\n\u003cli\u003eSimple installation with pre-applied 3M adhesive\u003c\/li\u003e\n\u003cli\u003eUV-resistant ABS enclosure suitable for UV-sterilisation environments\u003c\/li\u003e\n\u003cli\u003eBlue LED status indicator for power and operation feedback\u003c\/li\u003e\n\u003cli\u003eSupports iBeacon protocol\u003c\/li\u003e\n\u003cli\u003eCompatible with iOS 7.0+ and Android 4.3+ devices\u003c\/li\u003e\n\u003cli\u003eOpen-source indoor positioning solution support\u003c\/li\u003e\n\u003cli\u003eSuitable for asset tracking, personnel positioning, indoor navigation, and route analysis applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eGeneral Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS (Anti-UV）\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIP rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimension(L*W*H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΦ50*20.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e45g(include battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLi\/SOCI2 battery, 2400mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChip\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003enRF52 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth Version\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBLE 5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBluetooth Protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eiBeacon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAccelerometer, Optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × Blue LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAPP\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSenseCraft APP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-20~60℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMore than 5 years\u003cbr\u003e(0dBm\/500ms in default configuration).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDefault broadcast parameters\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUUID\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5EEEDBCA-AC02-43B0-B0CF-C6EB07647825\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMajor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAssigned from the device MAC address\u003cbr\u003e(lower 2 bytes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAssigned from the device MAC address\u003cbr\u003e(upper 2 bytes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMeasured power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-59dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTx Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 ~ +4 dBm, default 0 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdv Interval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20ms ~ 30s, default 500ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePassword\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12345678\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDevice Name\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Service\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBattery icon display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility information\u003c\/h3\u003e\n\u003ctable style=\"height: 90px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 57.5125px;\"\u003e\u003cstrong\u003eBLE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 664.537px;\"\u003eBLE 5.0+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 36px;\"\u003e\n\u003ctd style=\"height: 36px; width: 57.5125px;\"\u003e\u003cstrong\u003eiOS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 36px; width: 664.537px;\"\u003eiOS 7.0+\u003cbr\u003eiPhone 4S, iPhone 5\/5C\/5S, iPhone 6\/6Plus\/6S\/6S Plus, iPhone 7\/7Plus, iPad mini\/mini2\/4\/Air\/Pro, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 36px;\"\u003e\n\u003ctd style=\"height: 36px; width: 57.5125px;\"\u003e\u003cstrong\u003eAndroid\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 36px; width: 664.537px;\"\u003eAndroid 4.3+\u003cbr\u003eSamsung, XIAOMI, HUAWEI, ONEPLUS, vivo, OPPO, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Product documents\" rel=\"noopener\" href=\"https:\/\/files.seeedstudio.com\/wiki\/BC03\/BC03_Beacon_Specification_V1.1.pdf\" target=\"_blank\"\u003eProduct documents\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/wiki.seeedstudio.com\/bluetooth_beacon03_for_tracker_introduction\/\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"User guide\" rel=\"noopener\" href=\"https:\/\/wiki.seeedstudio.com\/bluetooth_beacon03_for_tracker_user_guide\/\" target=\"_blank\"\u003eUser guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SenseCAP BC03 Indoor Bluetooth Beacon for Tracker\u003c\/li\u003e\n\u003cli\u003e1x 3M Sticker (Pre-taped)\u003c\/li\u003e\n\u003cli\u003e2x Insulating film\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":55635442205057,"sku":"106873","price":11.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sensecap-bc03-indoor-bluetooth-beacon-for-tracker-seeed-106873-1237076425.jpg?v=1778165352"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/collections\/1327-05_1024x1024_a0ccddf9-637a-4224-b96c-d99f8ee16080.jpg?v=1541172564","url":"https:\/\/thepihut.com\/collections\/adafruit-wireless\/brand_adafruit.oembed","provider":"The Pi Hut","version":"1.0","type":"link"}