Cart 0

Superfast Shippingfrom just £2.99

No Quibblereturns policy

Next Day Deliveryorder by 2PM*

TV Aerial (DVB-T & DVB-T2) - Indoor

TV Aerial (DVB-T & DVB-T2) - Indoor
Only 3 left!
£ 19.99

The Raspberry Pi TV-uHAT allows you to receive digital terrestrial TV broadcasts! This is an aerial compatible with the TV HAT!

Please Note. This is an indoor antenna, designed to be situated internally next to, or adhered to, a window.


  • Type: Indoor TV Antenna
  • Receives: Digital HDTV/DVBT/T2
  • Frequency Range: VHF (172-240Mhz) \ UHF (470-860Mhz)
  • Color: Black
  • Impedance: 75ohm
  • Gain: 25db
  • Reception Range: Up To 100 Miles
  • Resolution: Supports 4K Quality (Need 4K TV)
  • Amplifier: Amplified with Television Signal Amplifier Booster

Set up Guide 

Step1 : Connect the end of attached coaxial cable to the ANT/IN connector on the TV HAT (or Digital Converter Box) and plug the USB plug into the USB port of the TV or the Raspberry Pi.

Step 2 : Hold the antenna near the window, placing it horizontally or vertically.

Step 3 : In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna”   or   “Air” , for more detailed instructions, please refer to your TV manual.

Step 4 : In the TV’ s  or  STB ’ s  setup menu, set TV to  “scan” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions.

Step 5 : If reception is sporadic, try moving the antenna to another location and re-scanning the TV until optimal position is found.

Please Note. The antenna works best when placed near to or on a window at a high level, and will require positioning for best reception. Local interference from high power devices could could loss of reception. Indoor use only.

Package Contents:

1 x Indoor Digital TV Antenna

1 x Signal Amplifier

1 x Universal Connector 

1 x User Manual