{"title":"Cables","description":"\u003cp\u003eHere at the Pi Hut we understand that no single cable fits every project, so we’ve worked hard to find and list as many cable variations as we can, for as many different functions as possible.\u003c\/p\u003e\n\u003cp\u003eWe have pages of different maker cables for your electronics projects, media centres, robots and more. Our extensive cable range covers audio, video, network, USB, power and more.\u003c\/p\u003e\n\u003cp\u003eWe sell USB switch cables for convenient power control for boards such as the Raspberry Pi and Arduino, along with multiple variations of USB cables for other programmable boards.\u003c\/p\u003e\n\u003cp\u003eIf you need a custom DIY USB cable for your specific project needs, take a look at our DIY USB Connectors section for a great range of options.\u003c\/p\u003e","products":[{"product_id":"1-8m-hdmi-cable","title":"HDMI Cable","description":"\u003cp\u003eA high-quality \u003cstrong\u003efull-size \u003c\/strong\u003e(standard) HDMI to HDMI cable for the \u003ca href=\"\/products\/raspberry-pi-3-model-b-plus\" target=\"_blank\"\u003eRaspberry Pi 3B+\u003c\/a\u003e, \u003ca href=\"\/products\/raspberry-pi-3-model-a-plus\" title=\"Raspberry Pi 3A+\"\u003e3A+\u003c\/a\u003e, 3 and 2 (and older).\u003c\/p\u003e\n\u003cp\u003eThis is a high-speed version V1.4 with Ethernet, 3D and CEC support\u003cspan\u003e, available in 1m, 2m or 5m lengths (select\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebefore adding to cart).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eThis HDMI cable is\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003enot\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ecompatible with the Raspberry Pi 4, 5 or Pi Zero:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/hdmi-to-micro-hdmi-cable-2m-gold-plated\" target=\"_blank\"\u003eClick here\u003c\/a\u003e for a Raspberry Pi 4 (Micro HDMI) cable\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Pi Zero HDMI cable\" href=\"\/products\/mini-hdmi-to-hdmi-cable-v1-4-zero\"\u003e Click here\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor a Raspberry Pi Zero (Mini HDMI) cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe moulded connector style may change between batches.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTested for Compatibility with the Raspberry Pi 3B+ and earlier models with full-size HDMI ports\u003c\/li\u003e\n\u003cli\u003eHDMI Male (19-pin) to HDMI Male (19-pin)\u003c\/li\u003e\n\u003cli\u003eFully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)\u003c\/li\u003e\n\u003cli\u003eSupports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions\u003c\/li\u003e\n\u003cli\u003eSupports 3D Content, Supports Audio Return Channel, Supports True HD Dolby 7.1 and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003e30AWG Wire\u003c\/li\u003e\n\u003cli\u003eHDPE insultation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"1m","offer_id":40821663629507,"sku":"103601","price":3.0,"currency_code":"GBP","in_stock":true},{"title":"2m","offer_id":40821663662275,"sku":"103602","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"5m","offer_id":40821663695043,"sku":"103603","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/hdmi-cable-for-raspberry-pi-3-the-pi-hut-29921774502083.jpg?v=1646471702"},{"product_id":"2m-network-cable-for-the-raspberry-pi","title":"Pure Copper RJ45 Cat5e Ethernet LAN Cable","description":"\u003cp\u003eThese RJ45 Cat5e Ethernet cables come in a \u003cstrong\u003evariety of lengths\u003c\/strong\u003e and use \u003cstrong\u003epure copper wires\u003c\/strong\u003e which, compared to cheaper CCA cables, offers a lower DC resistance making them \u003cstrong\u003emore suitable for Power over Ethernet (PoE) projects\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThey also have a lower attenuation, helping to reduce packet loss and the need for retransmitted packets - keeping network speeds where they should be.\u003c\/p\u003e\n\u003cp\u003ePerfect for the \u003ca title=\"Raspberry Pi\" href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi\u003c\/a\u003e and around the home, these pure copper network cables are the ideal choice for a quality connection.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCat 5 Network Cable\u003c\/li\u003e\n\u003cli\u003e26 AWG Bare copper cores\u003c\/li\u003e\n\u003cli\u003eUTP (Unshielded Twisted Pair)\u003c\/li\u003e\n\u003cli\u003eMoulded\u003c\/li\u003e\n\u003cli\u003eCM (UL) C(UL) 4P\u003c\/li\u003e\n\u003cli\u003eISO\/IEC 11801 AND TIA\/EIA 568B.2\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eAvailable lengths: 2m, 5m, 10m, 20m, 30m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"2m","offer_id":54208121536897,"sku":"104756","price":2.0,"currency_code":"GBP","in_stock":true},{"title":"5m","offer_id":54208121569665,"sku":"106480","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"10m","offer_id":54208121602433,"sku":"106479","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"20m","offer_id":54208121635201,"sku":"106481","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"30m","offer_id":54208121667969,"sku":"106482","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/pure-copper-rj45-cat5e-ethernet-lan-cable-2m-the-pi-hut-104756-30132405698755.jpg?v=1646910543"},{"product_id":"usb-cable-with-switch","title":"USB Cable with Switch","description":"\u003cp\u003eA handy power switch for any USB-powered device or project!\u003c\/p\u003e\n\u003cp\u003eOne (male) end plugs into a female USB port, and the other (female) end is ready to accept whatever device you're trying to power. It's a really handy item to have in your maker bits box to avoid reaching for plugs and sockets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-A female to USB-A Male\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eRated for 5V\u003c\/li\u003e\n\u003cli\u003e2A switch rating\u003c\/li\u003e\n\u003cli\u003eNo data line connection\u003c\/li\u003e\n\u003cli\u003eSwitch Dimensions: 60x26x14mm\u003c\/li\u003e\n\u003cli\u003eLength: 22cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default","offer_id":758603909,"sku":"102870","price":2.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-cable-with-switch-the-pi-hut-102870-15176512077886.jpg?v=1646092445"},{"product_id":"in-line-power-switch-for-2-1mm-barrel-jack","title":"In-line Power Switch for 2.1mm Barrel Jack","description":"\u003cp\u003eAdd a power switch to \u003cem\u003eany\u003c\/em\u003e project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.\u003cbr\u003e\u003cbr\u003eComes with a 5.5\/2.1mm barrel jack on one end an a plug on the other. In between is an in-line switch that is rated for 125V and 2Amps (its normally used for lamps, we suppose). Since most people will be using it with no more than 12VDC, we think it can probably handle up to 5A at that voltage.\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739226065,"sku":"103461","price":2.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/in-line-power-switch-for-2-1mm-barrel-jack-the-pi-hut-103461-40122776944835.jpg?v=1675247912"},{"product_id":"jst-ph-battery-extension-cable-500mm","title":"JST-PH Battery Extension Cable - 500mm","description":"\u003cp\u003eBy popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon\/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the battery pack far from your Flora but useful in many other situations where you need a little more space.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eJST-PH Battery Extension Cable - 500mm (\u003ca href=\"https:\/\/www.youtube.com\/watch?feature=player_detailpage\u0026amp;v=XNyl7mZ3V1g#t=71\"\u003e1:11\u003c\/a\u003e)\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; float: left; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739229265,"sku":"103553","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/jst-ph-battery-extension-cable-500mm-the-pi-hut-103553-13723997798462.jpg?v=1646453161"},{"product_id":"arcade-button-quick-connect-wire-pairs-0-11-10-pack","title":"Arcade Button Quick-Connect Wire Pairs - 2.8mm\/0.11\" (10 pack)","description":"\u003cp\u003eQuick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick.\u003c\/p\u003e\n\u003cp\u003eEach wire comes as a 'pair' with two 0.11\"\/2.8mm quick-connects pre-crimped onto 20cm long wires. The wires are then terminated together in a JST 2.5mm\/0.1\" spaced 2-pin connector (we don't have the exact part number yet for the connector but you can just use 0.1\" header) Of course you can cut this off if you don't have use for it.\u003cbr\u003e\u003cbr\u003eWorks best with our round plain arcade buttons, doesn't work as well on the square or round \"illuminated\" buttons.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/quickconnect110.pdf\"\u003eDatasheet showing dimensions for an equivalent 0.11\" quick connect part number\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739233425,"sku":"105667","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/arcade-button-quick-connect-wire-pairs-0-11-10-pack-the-pi-hut-ada1152-28609667334339.jpg?v=1646658913"},{"product_id":"miniature-slip-ring-12mm-diameter-12-wires-max-240v-2a","title":"Miniature Slip Ring - 12mm diameter, 12 wires, max 240V @ 2A","description":"\u003cp\u003eWith a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have.\u003cbr\u003e\u003cbr\u003eInside the miniature plastic tube is a gold plated slip ring for 12 wires. There are twelve color coded wire sets made of 28 AWG and no matter how you twist the assembly, they will remain in continuity. Each of the wire sets can carry up to 2A at up to 240VAC or 240VDC. This model is the tiniest slip ring you can get, a mere 20mm long, 12mm diameter. Rated to rotate up to 300 RPM (but you can probably go faster if you don't mind a reduced life and\/or noise).\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e12-wire slip rings (3:42)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eRated voltage: 240VAC\/240VDC\u003c\/li\u003e\n\u003cli\u003eRated current: 2 Amp\u003c\/li\u003e\n\u003cli\u003e6 x 6\" long 28 AWG wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/SRC012.pdf\"\u003eCheck out the datasheet for the SRC012C-12 for all specifications\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739247249,"sku":"104473","price":21.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/miniature-slip-ring-12mm-diameter-12-wires-max-240v-2a-the-pi-hut-104473-28610484535491.jpg?v=1646352917"},{"product_id":"slip-ring-with-flange-22mm-diameter-12-wires-max-240v-2a","title":"Slip Ring with Flange - 22mm diameter, 12 wires, max 240V @ 2A","description":"\u003cp\u003eWith a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have.\u003cbr\u003e\n\u003cbr\u003e\nInside the plastic tube is a gold plated slip ring for 12 wires. There are 12 color coded wire sets made of 28 AWG and no matter how you twist the assembly, they will remain in continuity. Each of the wire sets can carry up to 2A at up to 240VAC or 240VDC. There's a 44mm (1.7\") diameter flange with mounting holes to make it easy to attach or you can cut it off with a hacksaw and drill\/machine as you wish it seems to just be ABS plastic. Rated to rotate up to 300 RPM (but you can probably go faster if you don't mind a reduced life and\/or noise).\u003cbr\u003e\n\u003cbr\u003e\nHere's a video of our six-connector slip ring, to show how it works inside:\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/p\u003e \u003cp\u003e12-wire slip rings (\u003ca href=\"https:\/\/www.youtube.com\/watch?feature=player_detailpage\u0026amp;v=XNyl7mZ3V1g#t=222\"\u003e3:42\u003c\/a\u003e)\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eRated voltage: 240VAC\/240VDC\u003c\/li\u003e\n\u003cli\u003eRated current: 2 Amp\u003c\/li\u003e\n\u003cli\u003e12 x 6\" long 28 AWG wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/SRC022A-6.pdf\"\u003eCheck out the datasheet for the SRC022A-12 for all specifications\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; float: left; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739247569,"sku":"102782","price":17.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slip-ring-with-flange-22mm-diameter-12-wires-max-240v-2a-the-pi-hut-102782-13718470623294.jpg?v=1646188577"},{"product_id":"usb-cable-8-a-to-mini-b-charging-and-micro-b-data","title":"USB cable - 8\" A to Mini B Charging and Micro B Data","description":"\u003cp\u003e\u003cstrong\u003eThe Mini-B \u0026amp; Micro-B USB Cable provides a compact way to power and connect devices with either Mini USB or Micro USB ports, making it a handy addition to any electronics toolkit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eMini or Micro? Mini or Micro??? Mini AND Micro! \u003c\/p\u003e\n\u003cp\u003eThis is a handy \u003cstrong\u003eUSB \u003c\/strong\u003ecable, it's compact so you can toss it into your toolkit, and has both \u003cstrong\u003eMini-B \u003c\/strong\u003eand \u003cstrong\u003eMicro-B \u003c\/strong\u003econnector. Now you can hook up your LiPo Charger or a \u003ca href=\"\/collections\/arduino-store\" title=\"Arduino Store\"\u003eArduino\u003c\/a\u003e Micro\/Leonardo\/\u003ca href=\"\/collections\/raspberry-pi\" title=\"Official Raspberry Pi Products\"\u003eRaspberry Pi\u003c\/a\u003e using the same cable, sweet!\u003c\/p\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e8 inches\u003c\/strong\u003e long from end to end, its a little more compact than our classic 3 inch long cable\u003c\/p\u003e\n\u003cp\u003eThis cable \u003cstrong\u003edoes not contain a hub\u003c\/strong\u003e, so you can only connect one USB device at a time (to either end). The micro end does data and power, the mini side only does power (not data).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kuBqpIIPpGI?si=ysT8hHiNula6x_dc\u0026amp;start=11\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual connectors: Mini-B and Micro-B USB endpoints\u003c\/li\u003e\n\u003cli\u003eApproximately 8\" (20cm) in length\u003c\/li\u003e\n\u003cli\u003eCompact design, ideal for portable toolkits\u003c\/li\u003e\n\u003cli\u003eCompatible with LiPo chargers, Arduino Micro, Leonardo, and Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eMicro-B end supports data and power transfer\u003c\/li\u003e\n\u003cli\u003eMini-B end supports power only (no data)\u003c\/li\u003e\n\u003cli\u003eSingle device connection at a time\u003c\/li\u003e\n\u003cli\u003eNo hub included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 8.5 inches\u003c\/li\u003e\n\u003cli\u003eWeight: 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB cable - 8\" A to Mini B Charging and Micro B Data\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739247697,"sku":"ADA1197","price":3.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/usb-cable-8-a-to-mini-b-charging-and-micro-b-data-adafruit-ada1197-1243956636.jpg?v=1781190309"},{"product_id":"10-pin-idc-socket-rainbow-breakout-cable","title":"10-pin IDC Socket Rainbow Breakout Cable","description":"\u003cp\u003e\u003cstrong\u003eThe 10-Pin IDC to Female Socket Cable provides a convenient way to break out IDC connections to standard 0.1\" sockets, making it ideal for prototyping, debugging, and custom wiring projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eWe’re not entirely sure what to call this cable. It features a \u003cstrong\u003e10-pin IDC connector\u003c\/strong\u003e on one end, \u003cstrong\u003e6 inches\u003c\/strong\u003e of rainbow ribbon cable, and \u003cstrong\u003e0.1\" female socket\u003c\/strong\u003e connectors on the other end.\u003c\/p\u003e\n\u003cp\u003eWe think it could be useful as a \u003cstrong\u003e10-pin JTAG breakout adapter\u003c\/strong\u003e, or perhaps as a cable re-arranger for custom wiring projects. Either way, it seems handy, so we picked up a bunch.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/XNyl7mZ3V1g?si=aunjqS_hoBEMmqbT\u0026amp;start=7\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10-pin IDC connector on one end\u003c\/li\u003e\n\u003cli\u003e6 inches of rainbow ribbon cable\u003c\/li\u003e\n\u003cli\u003e0.1\" female socket connectors on both ends\u003c\/li\u003e\n\u003cli\u003eSuitable for JTAG debugging and programming\u003c\/li\u003e\n\u003cli\u003eIdeal for breadboard prototyping\u003c\/li\u003e\n\u003cli\u003ePin re-arrangement and breakout applications\u003c\/li\u003e\n\u003cli\u003eStandard 0.1\" pitch connectors\u003c\/li\u003e\n\u003cli\u003eColour-coded ribbon for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1199\/C1429+datasheet.pdf\" target=\"_blank\" title=\"Datasheet\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 10-pin IDC Socket Rainbow Breakout Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739248081,"sku":"ADA1199","price":3.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/10-pin-idc-socket-rainbow-breakout-cable-adafruit-ada1199-1242678737.jpg?v=1780577231"},{"product_id":"right-angle-usb-cable-a-microb","title":"Right Angle USB cable - A\/MicroB","description":"\u003cp\u003e\u003cstrong\u003eThis Right-Angle USB-A to Micro-B Cable saves space with a 90° connector, making it ideal for compact setups like Raspberry Pi Model A or B, while its thicker power wires support higher current devices.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis here is your standard \u003cstrong\u003eA to micro-B USB cable\u003c\/strong\u003e, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a \u003cstrong\u003eright angle bend\u003c\/strong\u003e. We thought this might make a good pair for a \u003ca href=\"\/collections\/raspberry-pi\" title=\"Official Raspberry Pi Products\"\u003eRaspberry Pi\u003c\/a\u003e Model A or B as the cable doesn't stick out as far. We got cables with extra-beefy \u003cstrong\u003e24 AWG\u003c\/strong\u003e \u003cstrong\u003epower wires\u003c\/strong\u003e, and \u003cstrong\u003e28 AWG data lines\u003c\/strong\u003e, so it's particularly good for power-hungry devices like micro-computers and phones.\u003c\/p\u003e\n\u003cp\u003eThis cable isn't suggested for Model B+ since the micro USB moved around the corner - this cable blocks the HDMI port!\u003c\/p\u003e\n\u003cp\u003eApproximately 5 feet \/ 1.5 meter long.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB A to Micro-B connector with right angle bend design\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003e24 AWG power wires for high-current devices\u003c\/li\u003e\n\u003cli\u003e28 AWG data lines\u003c\/li\u003e\n\u003cli\u003e5 feet (1.5 meters) long\u003c\/li\u003e\n\u003cli\u003eIdeal for Raspberry Pi Model A and B\u003c\/li\u003e\n\u003cli\u003eNot compatible with Raspberry Pi Model B+ (blocks HDMI port)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 1.42m\u003c\/li\u003e\n\u003cli\u003eWeight: 56.13g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Right Angle USB cable - A\/MicroB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739294801,"sku":"ADA1318","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/right-angle-usb-cable-a-microb-adafruit-ada1318-1234108313.jpg?v=1776964001"},{"product_id":"2-1mm-dc-barrel-jack-to-alligator-clips","title":"2.1mm DC Barrel Jack to Alligator Clips","description":"\u003cp\u003eTurn a wall adapter into a mini power supply with this incredibly useful adapter.\u003c\/p\u003e\n\u003cp\u003eA high quality molded 2.1mm DC barrel jack is brought out to red (center positive) \u0026amp; black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to 24VDC.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical details\u003c\/h2\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eCable Length: 260.35mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10.86g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739302801,"sku":"103720","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/2-1mm-dc-barrel-jack-to-alligator-clips-the-pi-hut-103720-13719502028862.jpg?v=1646791567"},{"product_id":"2-1mm-dc-barrel-plug-to-alligator-clips","title":"2.1mm DC Barrel Plug to Alligator Clips","description":"\u003cp\u003e\u003cstrong\u003eThe DC Barrel Plug to Alligator Clip Adapter makes it easy to power electronics from battery packs and loose wiring, with a standard 2.1mm DC plug on one end and colour-coded alligator clips on the other.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eTurn any battery pack into a power supply with this incredibly useful adapter. A high quality moulded \u003cstrong\u003e2.1mm DC barrel plug\u003c\/strong\u003e is brought out to red (centre positive) \u0026amp; black (ring negative) alligator clips. 2.1mm is a near-standard for electronics, so with this adapter you can easy clip and connect packs and wires to a power jack. Good for about \u003cstrong\u003e2A or 3A\u003c\/strong\u003e of current and up to \u003cstrong\u003e24VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/oHNjyMrqcno?si=y9EfoNE64m4t9qs4\u0026amp;start=88\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConverts battery packs to power supplies\u003c\/li\u003e\n\u003cli\u003e2.1mm DC barrel plug connector\u003c\/li\u003e\n\u003cli\u003eRed and black alligator clips (centre positive, ring negative)\u003c\/li\u003e\n\u003cli\u003eSupports up to 2-3 Amps current\u003c\/li\u003e\n\u003cli\u003eRated for 24VDC maximum\u003c\/li\u003e\n\u003cli\u003eHigh quality moulded connector\u003c\/li\u003e\n\u003cli\u003eCompatible with standard 2.1mm electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWire Length: At least 254mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2.1mm DC Barrel Plug to Alligator Clips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739302993,"sku":"ADA1329","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/2-1mm-dc-barrel-plug-to-alligator-clips-adafruit-ada1329-1245071969.jpg?v=1781780559"},{"product_id":"2-way-2-1mm-dc-barrel-jack-splitter-squid","title":"2-Way 2.1mm DC Barrel Jack Splitter Squid","description":"\u003cp\u003e\u003cstrong\u003eThis 2-Way DC Power Splitter lets you power two devices from a single 5.5mm\/2.1mm DC power source, providing a simple and tidy way to distribute power between multiple projects or components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDouble up your power adapters with this wonderfully simple \u003cstrong\u003e2-way power jack splitter\u003c\/strong\u003e. All you have to do is connect a standard \u003ca href=\"\/products\/mean-well-5v-4a-20w-power-supply-gst25a05-p1j\" title=\"Mean Well 5V 4A 20W Power Supply (GST25A05-P1J)\"\u003e5.5mm\/2.1mm\u003c\/a\u003e sized plug into one end, and behold, two identical plugs to use!\u003c\/p\u003e\n\u003cp\u003eWe like the rugged moulding on these adapters, and they're really handy when you have a project with multiple pluggable devices.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xZ8z1IgKhNE?si=7RfPM5S_yVtOUCVk\u0026amp;start=25\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-way power jack splitter for 5.5mm\/2.1mm plugs\u003c\/li\u003e\n\u003cli\u003eConverts one power input into two identical outputs\u003c\/li\u003e\n\u003cli\u003eRugged moulded construction\u003c\/li\u003e\n\u003cli\u003eIdeal for powering multiple devices from a single adapter\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 20.3g\u003c\/li\u003e\n\u003cli\u003eTotal Length: 30cm\u003c\/li\u003e\n\u003cli\u003ePlug Cable Length: 10.5cm\u003c\/li\u003e\n\u003cli\u003eMax Width: 14mm\u003c\/li\u003e\n\u003cli\u003eJack-side cable is 22AWG. Plug side cables are 24AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of May 12, 2026\u003c\/strong\u003e : The design of the splitter squid is slightly different.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/1351\/P1351B.pdf\" title=\"Datasheet\" rel=\"noopener\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2-Way 2.1mm DC Barrel Jack Splitter Squid\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739314129,"sku":"ADA1351","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/2-way-2-1mm-dc-barrel-jack-splitter-squid-adafruit-ada1351-1245715300.jpg?v=1782211932"},{"product_id":"4-way-2-1mm-dc-barrel-jack-splitter","title":"4-Way 2.1mm DC Barrel Jack Splitter","description":"\u003cp\u003eQuadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm\/2.1mm sized plug into one end, and behold, four identical plugs to use! We like the rugged molding on these adapters, and they're really handy when you have a project with multiple pluggable devices.\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/p\u003e \u003cp\u003e4-Way 2.1mm DC Barrel Jack Splitter (\u003ca href=\"https:\/\/www.youtube.com\/watch?feature=player_detailpage\u0026amp;v=xZ8z1IgKhNE#t=25\"\u003e0:25\u003c\/a\u003e)\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eWeight: 38g\u003c\/li\u003e\n\u003cli\u003eTotal Length: 410mm \/ 16.1\"\u003c\/li\u003e\n\u003cli\u003eSplitter cable length: 215mm \/ 8.5\"\u003c\/li\u003e\n\u003cli\u003eMax Width: 38mm \/ 1.5\"\u003c\/li\u003e\n\u003cli\u003eJack-side cable is 22AWG. Plug side cables are 24AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; float: left; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739314577,"sku":"103190","price":4.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/4-way-2-1mm-dc-barrel-jack-splitter-the-pi-hut-103190-13718692495422.jpg?v=1646769078"},{"product_id":"usb-diy-connector-shell-type-a-male-plug","title":"USB DIY Connector Shell - Type A Male Plug","description":"\u003cp\u003eMake your own USB connections without slicing apart a USB cable and soldering those thin wires inside.\u003c\/p\u003e\n\u003cp\u003eEach shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Dimensions: 45.95mm \/ 1.8\" x 15.82mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.36g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739329937,"sku":"104249","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-diy-connector-shell-type-a-male-plug-the-pi-hut-104249-28609276248259.jpg?v=1646092082"},{"product_id":"usb-diy-connector-shell-type-a-socket","title":"USB DIY Connector Shell - Type A Socket","description":"\u003cp\u003eMake your own USB connections without slicing apart a USB cable and soldering those thin wires inside.\u003c\/p\u003e\n\u003cp\u003eEach shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739330321,"sku":"104234","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-diy-connector-shell-type-a-socket-the-pi-hut-104234-28609267990723.jpg?v=1646091911"},{"product_id":"usb-diy-connector-shell-type-mini-b-plug","title":"USB DIY Connector Shell - Type Mini-B Plug","description":"\u003cp\u003eMake your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY \"USB shells\" are available in 4:59)\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cp\u003eMax Cable Diameter: 3mm\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 34.4mm x 9.2mm x 8.9mm\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.4g\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739330641,"sku":"104233","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-diy-connector-shell-type-mini-b-plug-the-pi-hut-104233-28609252229315.jpg?v=1646091736"},{"product_id":"mcx-jack-to-bnc-rf-cable-adapter","title":"MCX Jack to BNC RF Cable Adapter","description":"\u003cp\u003eThis RF adapter bit is great for anyone doing RF work. If your receiver\/transmitter\/transceiver has an MCX connector but you really want to tie it to a BNC antenna, this dongle will do the trick!\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e \u003cli\u003eCable length: 139.7 \/ 5.5\"\u003c\/li\u003e \u003cli\u003eWeight: 19.37g\u003c\/li\u003e \u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739443217,"sku":"104200","price":5.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/mcx-jack-to-bnc-rf-cable-adapter-the-pi-hut-104200-28609770094787.jpg?v=1646890930"},{"product_id":"mcx-jack-to-sma-rf-cable-adapter","title":"MCX Jack to SMA RF Cable Adapter","description":"\u003cp\u003e\u003cstrong\u003eThis MCX to SMA RF Adapter makes it easy to connect devices with an MCX connector to SMA antennas or cables, providing a simple and reliable solution for RF testing, prototyping, and wireless projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis \u003cstrong\u003eRF adapter\u003c\/strong\u003e is ideal for anyone working with RF equipment. If your receiver, transmitter, or transceiver has an \u003cstrong\u003eMCX connector\u003c\/strong\u003e but you want to connect it to an \u003cstrong\u003eSMA antenna\u003c\/strong\u003e, this handy adapter makes it quick and easy.\u003c\/p\u003e\n\u003cp\u003eIt provides a simple, reliable way to bridge the two connector types without needing to modify your existing hardware.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnects MCX connectors to SMA antennas\u003c\/li\u003e\n\u003cli\u003eCompatible with receivers, transmitters and transceivers\u003c\/li\u003e\n\u003cli\u003eNo hardware modification required\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation\u003c\/li\u003e\n\u003cli\u003eReliable RF connector adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 260.35 \/ 10.25\"\u003c\/li\u003e\n\u003cli\u003eWeight: 8.92g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x MCX Jack to SMA RF Cable Adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739443409,"sku":"ADA1532","price":4.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/mcx-jack-to-sma-rf-cable-adapter-adafruit-ada1532-1245998276.jpg?v=1782384517"},{"product_id":"resistive-touchscreen-extension-cable-20cm-8-1mm-pitch","title":"Resistive Touchscreen Extension Cable - 20cm - 1mm Pitch","description":"\u003cp\u003e\u003cstrong\u003eThis 20cm Resistive Touch Screen Extension Cable makes it easy to extend the connection between a resistive touch screen and its controller, giving you more flexibility when mounting displays in your projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eStreeeeetch your resistive touch-screen's reach with a \u003cstrong\u003e20cm\u003c\/strong\u003e extension cord. This is a great accessory for our \u003ca href=\"\/products\/adafruit-tsc2046-spi-resistive-touch-screen-controller\" title=\"Adafruit TSC2046 SPI Resistive Touch Screen Controller\"\u003eresistive touch screen controller breakouts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlug your \u003cstrong\u003e4-pin 1mm pitch FPC\u003c\/strong\u003e into the socket end and the other end into your controller board. Pretty nice! The socket connector on the cable is symmetric so if it isn't working the way you like, flip over the connector into the socket.\u003c\/p\u003e\n\u003cp\u003eResistive Touch screen not included but available \u003ca href=\"\/products\/resistive-touch-screen-3-7-diagonal\" title='Resistive Touch screen - 3.7\" Diagonal'\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Rgso9ddjftM?si=vWvL4FtiAPbXsjIa\u0026amp;start=1830\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20cm extension cord for resistive touch-screen controllers\u003c\/li\u003e\n\u003cli\u003e4-pin 1mm pitch FPC connector\u003c\/li\u003e\n\u003cli\u003eCompatible with resistive touch screen controller breakouts\u003c\/li\u003e\n\u003cli\u003eSymmetric socket connector – reversible if needed\u003c\/li\u003e\n\u003cli\u003eExtends reach between touch-screen and controller board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 200mm\u003c\/li\u003e\n\u003cli\u003eWidth: 6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Resistive Touchscreen Extension Cable - 20cm \/ 8\" - 1mm Pitch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResistive Touch screen not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739535825,"sku":"ADA1662","price":2.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/resistive-touchscreen-extension-cable-20cm-1mm-pitch-adafruit-ada1662-1246135355.jpg?v=1782470797"},{"product_id":"3-pin-jst-sm-plug-receptacle-cable-set","title":"3-pin JST SM Plug + Receptacle Cable Set","description":"\u003cp\u003eThese 3-wire cables are 163mm (6.4\") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the \u003ca href=\"https:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\"\u003eJST SM connector datasheet\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eEach order receives one of each connector. Wires are 22 American wire gauge.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eJST SM plug + receptacle connector: \u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/JSTSM.pdf\"\u003eJST SM connector datasheet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: 163mm \/ 6.4\"\u003c\/li\u003e\n\u003cli\u003eWeight (female \/ male): 2.6g \/ 2.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739536145,"sku":"105730","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/3-pin-jst-sm-plug-receptacle-cable-set-the-pi-hut-ada1663-28609322614979.jpg?v=1646783472"},{"product_id":"5-pin-jst-sm-plug-receptacle-cable-set","title":"5-pin JST SM Plug + Receptacle Cable Set","description":"\u003cp\u003e\u003cstrong\u003eThis 5-Pin JST SM Connector Cable Set provides a simple, secure way to add detachable wiring to your projects, with locking connectors that are ideal for LED lighting, sensors, and other low-voltage electronics.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThese 5-wire cables are \u003cstrong\u003e168mm long\u003c\/strong\u003e and come as a set.\u003c\/p\u003e\n\u003cp\u003eOne cable has a \u003cstrong\u003eJST SM type connector\u003c\/strong\u003e plug on the end. The other cable has a matching \u003cstrong\u003eJST SM type receptacle connector\u003c\/strong\u003e. They are good for whenever you have \u003cstrong\u003e5 \u003c\/strong\u003ewires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the JST SM connector \u003ca rel=\"noopener\" title=\"Datasheet\" href=\"http:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\" target=\"_blank\"\u003edatasheet\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEach order includes \u003cstrong\u003eone of each connector\u003c\/strong\u003e, with \u003cstrong\u003e22AWG \u003c\/strong\u003ewires.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MLK9wk46msM?si=hiY4VYBqHXOCbz7_\u0026amp;start=463\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5-wire cable set with JST SM connector plug and receptacle\u003c\/li\u003e\n\u003cli\u003e168mm (6.6\") length\u003c\/li\u003e\n\u003cli\u003e22 AWG wire gauge\u003c\/li\u003e\n\u003cli\u003eSolid and compact connector design\u003c\/li\u003e\n\u003cli\u003eLatching mechanism prevents accidental disconnection\u003c\/li\u003e\n\u003cli\u003eOne plug and one receptacle connector per order\u003c\/li\u003e\n\u003cli\u003eReusable plug and unplug capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJST SM plug + receptacle connector\u003c\/li\u003e\n\u003cli\u003eLength: 168mm\u003c\/li\u003e\n\u003cli\u003eWeight (female \/ male): 4.3g \/ 4.7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 5-pin JST SM Plug + Receptacle Cable Set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739536529,"sku":"ADA1664","price":1.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/5-pin-jst-sm-plug-receptacle-cable-set-adafruit-ada1664-1246140142.jpg?v=1782478478"},{"product_id":"6-pin-jst-sm-plug-receptacle-cable-set","title":"6-pin JST SM Plug + Receptacle Cable Set","description":"\u003cp\u003eThese 6-wire cables are 162mm (6.4\") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 6 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the \u003ca href=\"https:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\"\u003eJST SM connector datasheet\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eEach order receives one of each connector. Wires are 22 American wire gauge.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003eJST SM plug + receptacle connector: \u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/JSTSM.pdf\"\u003eJST SM connector datasheet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLength: 162mm \/ 6.4\"\u003c\/li\u003e\n\u003cli\u003eWeight (female \/ male): 5.1g \/ 5.6g\u003c\/li\u003e\n\u003c\/ul\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739536913,"sku":"103132","price":1.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/6-pin-jst-sm-plug-receptacle-cable-set-the-pi-hut-103132-13724243558462.jpg?v=1646766372"},{"product_id":"10-pin-2x5-socket-socket-1-27mm-idc-swd-cable-150mm-long","title":"10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long","description":"\u003cp\u003eThese little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05\") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop!\u003cbr\u003e\n\u003cbr\u003e\nOne cable per order. The \u003cb\u003eribbon cable\u003c\/b\u003e is 0.06mm\/0.025\" pitch and the \u003cb\u003econnector\u003c\/b\u003e is a 1.27mm (0.05\") pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1\" pitch connectors so be aware which you need!\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/p\u003e \u003cp\u003e10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (\u003ca href=\"https:\/\/www.youtube.com\/watch?feature=player_detailpage\u0026amp;v=bMnwgO8dxxQ#t=637\"\u003e10:37\u003c\/a\u003e)\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm long x 6mm wide \/ 5.9\" x .3\"\u003c\/li\u003e\n\u003cli\u003eConnector: 5mm x 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.9g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; display: inline-block; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2015_863_EU.svg?5383\" style=\"max-width: 146px; display: inline-block;\"\u003e\n      \u003c\/div\u003e\n\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739546001,"sku":"102798","price":2.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/10-pin-2x5-socket-socket-1-27mm-idc-swd-cable-150mm-long-the-pi-hut-102798-13723716386878.jpg?v=1646818926"},{"product_id":"50-pin-0-5mm-pitch-fpc-flex-cable-250mm-10-long","title":"50-pin 0.5mm Pitch FPC Flex Cable - 250mm \/ 10\" long","description":"\u003cp\u003eFPC cables are super thin and flexible. They're often used in electronics when a a round cable would be too bulky, especially if you're dealing with 50 contacts like this one! This cable has 50 pins, 0.5mm pitch, and is 250mm long. 14:35)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eDimensions: 250mm x 26mm (10\" x 1\")\u003c\/li\u003e\n\u003cli\u003eWeight: 0.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739550545,"sku":"104346","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/50-pin-0-5mm-pitch-fpc-flex-cable-250mm-10-long-the-pi-hut-104346-28609350041795.jpg?v=1646763498"},{"product_id":"usb-serial-converter","title":"USB\/Serial Converter (FT232RL)","description":"\u003cp\u003eThis USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-6V serial (RS232) not 5V serial (TTL), good for old devices like GPS, handhelds, programmers, etc with chunky DB9's on the side. Some cheaper RS232 cables 'cheat' and only give you 0-5V which wont work with some devices - this one has a true voltage doubler\/inverter to make it more compatible.\u003cbr\u003e\u003cbr\u003eThese are tested and work great with bit-bang serial programmers and adapters - note that they are slow in comparison to hardware serial ports due to the high overhead of USB.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNew!\u003c\/strong\u003e we just upgraded our adapters to be way more awesome. They're now FTDI-chip based for better performance and reliability. The drivers are rock solid and available for pretty much every operating system you will run across. Even better, inside are three visible LEDs: a power LED (letting you know its plugged in and working) and RX\/TX LEDs that you can use to help debug your connection. These are now our favorite RS232 adapters!\u003cbr\u003e\u003cbr\u003eUsing our older \"gray\" PL2303 converter? It comes with a CD but we strongly suggest using the most recent drivers from the Prolific Website if you're running windows and the 'fixed' driver for Mac OSX or \u003ca href=\"\"\u003ethe version for MacOS 64 bit\u003c\/a\u003e. If you're \u003ca href=\"https:\/\/www.adafruit.com\/datasheets\/PL2303%201.0.13.zip\"\u003eusing Windows 7 and you have issues, try the Prolific driver version 1.013\u003c\/a\u003e (This is only for the older \"PL2303\" based converter)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\u003cli\u003eCable Length: 1.37m \/ 54.25\" \/ may be up to 2m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIf you're having some issues with Win 7\/8 driver installation, please try the following:\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003estart win 7 or win 8, click start menu, input \u003cstrong\u003eCMD\u003c\/strong\u003e and run to start the command window. Type in the following command: \u003cstrong\u003ebcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen input: \u003cstrong\u003ebcdedit -set TESTSIGNING ON \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen re-start computer, computer will go into testing mode,  install the driver from the CD. When ready, run CMD againa and run input: \u003cstrong\u003ebcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen run: \u003cstrong\u003ebcdedit -set TESTSIGNING OFF \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739621905,"sku":"ADA18","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-serial-converter-ft232rl-the-pi-hut-ada18-28610297954499.jpg?v=1646892540"},{"product_id":"usb-diy-slim-connector-shell-microb-plug","title":"USB DIY Slim Connector Shell - MicroB Plug","description":"\u003cp\u003e\u003cstrong\u003eThis Slim USB Micro-B Male DIY Connector makes it easy to build or repair custom USB cables, with solder-friendly terminals and a compact overmoulded housing for a neat, professional finish.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eMake your own \u003cstrong\u003eUSB\u003c\/strong\u003e \u003cstrong\u003econnections \u003c\/strong\u003ewithout slicing apart a USB cable and soldering those thin wires inside.\u003c\/p\u003e\n\u003cp\u003eThis is the '\u003cstrong\u003eslim\u003c\/strong\u003e' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmoulding for a modern look. We also sell the slim size in \u003ca title=\"USB DIY Slim Connector Shell - A-M Plug\" href=\"\/products\/usb-diy-slim-connector-shell-a-m-plug\"\u003eUSB-A male\u003c\/a\u003e and \u003ca title=\"USB DIY Connector - Micro-USB Female Plug\" href=\"\/products\/usb-diy-connector-microb-female-plug\"\u003eUSB-microB female\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNormal DIY \"USB shells\" are available in \u003ca title=\"USB DIY Connector Shell - Type A Male Plug\" href=\"\/products\/usb-diy-connector-shell-type-a-male-plug\"\u003eUSB A plug\u003c\/a\u003e, micro B, \u003ca title=\"USB DIY Connector Shell - Type Mini-B Plug\" href=\"\/products\/usb-diy-connector-shell-type-mini-b-plug\"\u003emini B\u003c\/a\u003e and \u003ca title=\"USB DIY Connector Shell - Type A Socket\" href=\"\/products\/usb-diy-connector-shell-type-a-socket\"\u003eUSB A socket\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEach shell comes with a plastic shell and a proper connector with \u003cstrong\u003eeasy-to-solder\u003c\/strong\u003e tabs. All \u003cstrong\u003e5 \u003c\/strong\u003epins are brought out, \u003cstrong\u003e3 \u003c\/strong\u003eon one side of the connector, \u003cstrong\u003etwo \u003c\/strong\u003eon the other.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/W-iO9PKYZWM?si=0OzwXCPtcA8MUlWI\u0026amp;start=681\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIY MicroB Male connector - slim design\u003c\/li\u003e\n\u003cli\u003ePress-fit assembly into overmoulding for modern appearance\u003c\/li\u003e\n\u003cli\u003eNo soldering of thin wires required\u003c\/li\u003e\n\u003cli\u003eIncludes plastic shell and connector with easy-to-solder tabs\u003c\/li\u003e\n\u003cli\u003eAll 5 pins brought out - 3 pins on one side, 2 on the other\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard DIY shells available in USB-A plug, micro B, mini B and USB-A socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled Dimensions: 26mm x 10mm x 7mm\u003c\/li\u003e\n\u003cli\u003eAssembled Weight: 1.22g\u003c\/li\u003e\n\u003cli\u003eMicro USB Connector Dimensions: 14mm x 8.5mm x 6mm\u003c\/li\u003e\n\u003cli\u003eMicro USB Connector Weight: 0.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB DIY Slim Connector Shell - MicroB Plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739633681,"sku":"ADA1826","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/usb-diy-slim-connector-shell-microb-plug-adafruit-ada1826-1250814426.jpg?v=1784818093"},{"product_id":"usb-diy-slim-connector-shell-a-m-plug","title":"USB DIY Slim Connector Shell - A-M Plug","description":"\u003cp\u003eMake your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a modern look. We also carry the slim size in \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-slim-connector-shell-microb-plug\"\u003eMicro-B Male\u003c\/a\u003e and \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-microb-female-plug\"\u003eUSB-microB female.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eNormal DIY \"USB shells\" are available in \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-a-male-plug\"\u003eUSB A plug\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-micro-b-plug\"\u003emicro B\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-mini-b-plug\"\u003emini B\u003c\/a\u003e and \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-a-socket\"\u003eUSB A socket.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eEach shell comes with a plastic shell and a proper connector with easy-to-solder tabs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical details\u003c\/h2\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled Dimensions: 30mm x 15mm x 7mm\u003c\/li\u003e\n\u003cli\u003eAssembled Weight: 2.8g\u003c\/li\u003e\n\u003cli\u003eA-M USB Connector Dimensions: 21mm x 12mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eA-M USB Connector Weight: 1.9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739633873,"sku":"102802","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-diy-slim-connector-shell-a-m-plug-the-pi-hut-102802-13720913641534.jpg?v=1646091554"},{"product_id":"usb-diy-connector-microb-female-plug","title":"USB DIY Connector - Micro-USB Female Plug","description":"\u003cp\u003eAs an addition to our other USB DIY shells, we have a 'micro B female' in a panel-mount-like connector. This isn't true panel mount but you could glue the black plastic shell into your project and then press-fit in the micro B connector. The 5-pins are much easier to solder than a surface mount connector\u003cbr\u003e\u003cbr\u003eWe have other DIY \"USB shells\" are available in \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-a-male-plug\"\u003eUSB A plug\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-micro-b-plug\"\u003emicro B\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-mini-b-plug\"\u003emini B\u003c\/a\u003e and \u003ca href=\"https:\/\/thepihut.com\/products\/usb-diy-connector-shell-type-a-socket\"\u003eUSB A socket.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eEach shell comes with a plastic shell and a proper connector with easy-to-solder tabs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical details\u003c\/h2\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled Dimensions: 10mm x 9mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eAssembled Weight: 0.6g\u003c\/li\u003e\n\u003cli\u003eMicroB-F Connector Dimensions: 10mm x 7mm x 2mm\u003c\/li\u003e\n\u003cli\u003eMicroB-F Connector Weight: 0.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739634129,"sku":"103725","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-diy-connector-microb-female-plug-the-pi-hut-103725-13724358967358.jpg?v=1646092460"},{"product_id":"40-pin-fpc-extension-board-200mm-cable","title":"40-pin FPC Extension Board + 200mm Cable","description":"\u003cp\u003eGive your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board.  This 40pin FPC extension board has two 40-pin flex connectors (both are bottom contact type), and an extension cable to add ~22cm (20cm cable plus 2cm board)  Each order comes with one board a 20cm long, 40-pin 0.5mm pitch FPC cable and board. Works great with our 40pin TFTs!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e \u003cli\u003e18mm x 34mm x 4mm \/ 0.7\" x 1.3\" x 0.2\"\u003c\/li\u003e \u003cli\u003eCable Length: 200mm \/ 7.9\"\u003c\/li\u003e \u003cli\u003eBoard Thickness: 1.5mm \/ 0.06\"\u003c\/li\u003e \u003cli\u003eWeight: 2.7g\u003c\/li\u003e \u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739740113,"sku":"ADA2098","price":4.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/40-pin-fpc-extension-board-200mm-cable-the-pi-hut-ada2098-28609593344195.jpg?v=1646764392"},{"product_id":"hdmi-flat-cable-1-foot-30cm-long","title":"HDMI Flat Cable - 30cm","description":"\u003cp\u003eConnect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice moulded grips for easy installation and is 30 cm long.\u003c\/p\u003e\n\u003cp\u003eThis cable is absolutely \u003cstrong\u003eperfect\u003c\/strong\u003e for an LCD Raspberry Pi project. The cable is so thin and flexible that you won't have any loose dangling HDMI cables getting in the way, and you can even fit your Pi behind the screen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003eThickness: 2.7mm\u003c\/li\u003e\n\u003cli\u003eLength: ~30cm\u003c\/li\u003e\n\u003cli\u003eWeight: 27g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739782993,"sku":"103166","price":3.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/hdmi-flat-cable-30cm-the-pi-hut-103166-29915770585283.jpg?v=1646471528"},{"product_id":"bus-pirate-basic-probe-set","title":"Basic Probe Set for Bus Pirate v3.6","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Bus Pirate v3.6 Interface Cable makes it quick and simple to hook your Bus Pirate to circuits for testing and exploration. Designed specifically for v3.6, it provides clean, reliable connections — perfect for debugging, prototyping, and hardware hacking.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis is an interface cable designed for the \u003ca title=\"Bus Pirate - v3.6a\" href=\"\/products\/bus-pirate-v3-6a\"\u003eBus Pirate v3.6\u003c\/a\u003e which can make it easier to connect the Bus Pirate to a circuit and get hacking!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that this is not compatible with Bus Pirate 5!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Bus pirate basic probe set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739870929,"sku":"ADA238","price":17.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/basic-probe-set-for-bus-pirate-v3-6-adafruit-ada238-1204575498.jpg?v=1762972155"},{"product_id":"slim-hdmi-cable-900mm-3-feet-long","title":"Slim HDMI Cable - 900mm \/ 3 feet long","description":"\u003cp\u003eConnect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 914mm long (~3 feet). Sporting a teeny 4mm diameter this cable stays out of your way!\u003c\/p\u003e\n\u003cp\u003eWe also have slim HDMI cables at \u003ca href=\"https:\/\/thepihut.com\/products\/slim-hdmi-cable-450mm-1-5-feet-long\"\u003e450mm long\u003c\/a\u003e and \u003ca href=\"https:\/\/thepihut.com\/products\/slim-hdmi-cable-1820mm-6-feet-long\"\u003e1820mm long\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/2421\/2421.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCable Length: 914mm \/ 3ft\u003c\/li\u003e\n\u003cli\u003eCable Diameter: 4mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003eWeight: 27g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739912529,"sku":"ADA2421","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slim-hdmi-cable-900mm-3-feet-long-the-pi-hut-ada2421-28610160033987.jpg?v=1646188928"},{"product_id":"slim-hdmi-cable-1820mm-6-feet-long","title":"Slim HDMI Cable - 1820mm \/ 6 feet long","description":"\u003cp\u003eConnect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 1820mm long (~6 feet). Sporting a teeny 4mm diameter this cable stays out of your way!\u003c\/p\u003e\n\u003cp\u003eWe also have slim HDMI cables at \u003ca href=\"https:\/\/thepihut.com\/products\/slim-hdmi-cable-450mm-1-5-feet-long\"\u003e450mm long\u003c\/a\u003e and \u003ca href=\"https:\/\/thepihut.com\/products\/slim-hdmi-cable-900mm-3-feet-long\"\u003e914mm long\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/2422\/2422.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCable Length: 1820mm \/ 6ft\u003c\/li\u003e\n\u003cli\u003eCable Diameter: 4mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003eWeight: 45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739912785,"sku":"ADA2422","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slim-hdmi-cable-1820mm-6-feet-long-the-pi-hut-ada2422-28610284159171.jpg?v=1646906236"},{"product_id":"adafruit-mini-din-connector-cable-for-irobot-create-2-7-pins-6-feet","title":"Mini-DIN Connector Cable for iRobot Create 2 - 7 Pins - 6 feet","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 7-Pin Mini-DIN Connector lets you tap into the iRobot Create 2 hackport for full control using an Arduino or any 5 V TTL UART microcontroller. You can even draw power from the robot’s battery (up to ~21 V — use a buck converter for 5 V projects). Perfect for robotics experiments and Create 2 hacking!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eWith this handy 7 Pin Mini-DIN Connector, you can now jack into the hackport on your iRobot and control it with an \u003ca title=\"Official Arduino Products\" href=\"\/collections\/arduino\"\u003eArduino\u003c\/a\u003e or some other favourite microcontroller that has a 5V TTL UART! You can also power your project off of the internal Create 2's battery. Note that the battery voltage can be as high as ~21V, so a \u003ca title=\"UBEC DC\/DC Step-Down (Buck) Converter - 5V @ 3A (±10%)\" href=\"\/products\/ubec-dc-dc-step-down-buck-converter-5v-3a-output\"\u003ebuck converter\u003c\/a\u003e such as this one could be good for getting the unregulated VPWR from 20V down to a more reasonable 5V.\u003c\/p\u003e\n\u003cp\u003eThe iRobot Create 2 is a time tested durable mobile robot platform built from remanufactured Roomba robots, so instead of spending hours, or days, or weeks trying to build a functional robot and figuring out your power supplies and motors, just hack the iRobot! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note, \u003c\/strong\u003eiRobot Create 2 not included.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/EsgKAawwT9A?si=LEtABLccmDJAuDNr\u0026amp;start=8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 180cm\u003c\/li\u003e\n\u003cli\u003eWeight: 75g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/2438\/Create_2_Serial_to_USB_Cable_Creation.pdf\" title=\"Cable Creation\" rel=\"noopener\" target=\"_blank\"\u003eCreating 2 serial to USB cable creation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Create 2 Open Interface Specification\" href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/create_2_Open_Interface_Spec.pdf\" target=\"_blank\"\u003eiRobot Create 2 Open Interface specification\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of Sept 1, 2020 \u003c\/strong\u003ethis cable connector is no longer gold-plated. Instead, it is tin plated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Mini-DIN Connector Cable for iRobot Create 2–7 Pins - 6 feet\n\u003cul\u003e\n\u003cli\u003eiRobot Create 2 not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739931025,"sku":"ADA2438","price":6.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/mini-din-connector-cable-for-irobot-create-2-7-pins-6-feet-adafruit-ada2438-1199474278.jpg?v=1761310998"},{"product_id":"adafruit-50-pin-fpc-extension-board-200mm-cable","title":"50-pin FPC Extension Board + 200mm Cable","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eExtend any 50-pin 0.5mm pitch FPC connection by around 22cm using this extension board and included 20cm cable. Ideal for 50-pin TFTs and other compatible FPC devices.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eGive your 50-pin, 0.5mm pitch devices a little extra reach with this handy \u003ca href=\"\/collections\/adafruit\" title=\"Adafruit Products\"\u003eAdafruit\u003c\/a\u003e extension board. It includes two 50-pin FPC connectors and a matching extension cable, making it easy to reposition displays or other FPC-connected hardware without straining your setup.\u003c\/p\u003e\n\u003cp\u003eEach order includes one extension board and a 20cm long 50-pin 0.5mm pitch FPC cable. Combined with the board itself, you get roughly 22cm of total extension (around 20cm of cable plus 2cm of board). It’s a great match for our 50-pin TFT displays, or any other device that uses the same connector type.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/cHSlleGa1oo?si=3OjPqvl96Ex3uNBG\u0026amp;start=307\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e18mm x 34mm x 4mm\u003c\/li\u003e\n\u003cli\u003eCable Length: 200mm\u003c\/li\u003e\n\u003cli\u003eBoard Thickness: 1.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 50-pin FPC Extension Board\u003c\/li\u003e\n\u003cli\u003e1x 200mm 50-pin 0.5mm pitch FPC cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740003217,"sku":"ADA2571","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/50-pin-fpc-extension-board-200mm-cable-adafruit-ada2571-1215968888.jpg?v=1767978189"},{"product_id":"jst-ph-2-pin-cable-female-connector-150mm","title":"JST PH 2-Pin Cable - Female Connector 150mm","description":"\u003cp\u003eA short 100mm cable with a JST-PH connector on one side, and tinned wires on the other.\u003c\/p\u003e\n\u003cp\u003ePerfect for customising the connections on your project\/PCB to accept a LiPo battery, or simply as a replacement for existing battery connections.\u003c\/p\u003e\n\u003ch2\u003eA Word on Polarity...\u003c\/h2\u003e\n\u003cp\u003eThe cable connector industry doesn't appear to have a clearly defined standard for polarity with JST cables\/connectors\/batteries, so you may find different suppliers will have different polarity. \u003cstrong\u003eAlways check the polarity of any JST cable before using them\u003c\/strong\u003e.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eYou can easily swap the wires over by using a pin or similar to release each wire from the connector - this is a common process when using JST connections.\u003c\/p\u003e\n\u003ch2\u003eOther Options\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/jst-ph-2-pin-cable-male-header-200mm\"\u003eWe have the socket 'mating' version of this cable\u003c\/a\u003e \u003ca href=\"https:\/\/thepihut.com\/products\/jst-ph-battery-extension-cable-500mm\"\u003eand an 'extension' cable that has one of each soldered together\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you want a switch, \u003ca href=\"https:\/\/thepihut.com\/products\/jst-2-pin-extension-cable-with-on-off-switch-jst-ph2\"\u003etry this switched extension cable\u003c\/a\u003e, or for breadboarding and prototyping, \u003ca href=\"https:\/\/thepihut.com\/search?q=jst%20ph%20breakout\"\u003ewe have the matching connector but on a PCB\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg\" id=\"technical-details\"\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740011601,"sku":"102818","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/jst-ph-2-pin-cable-female-connector-150mm-the-pi-hut-102818-15215496134718.jpg?v=1646455323"},{"product_id":"usb-to-2-1mm-male-barrel-jack-cable","title":"USB to 2.1mm Male Barrel Jack Cable (22AWG \u0026 1 meter)","description":"\u003cp\u003eThere's two standard ways to power electronics - USB or 5.5mm\/2.1mm DC barrel jack. This or that! With this \u003cstrong\u003eUSB to 2.1mm Male Barrel Jack Cable\u003c\/strong\u003e, you can now power 5V DC powered electronics that have a DC jack from a USB jack with a handy 1 meter long cable.\u003c\/p\u003e\n\u003cp\u003eSimply plug the USB A side to any computer, \u003ca href=\"https:\/\/www.adafruit.com\/search?q=powerboost\u0026amp;b=1\"\u003ePowerBoost\u003c\/a\u003e, \u003ca href=\"https:\/\/thepihut.com\/products\/5v-1a-1000ma-usb-port-power-supply-ul-listed\"\u003eUSB wall adapter\u003c\/a\u003e, or \u003ca href=\"https:\/\/thepihut.com\/products\/usb-battery-pack-2200-mah-capacity-5v-1a-output\"\u003eeven a USB battery pack\u003c\/a\u003e. Other side is center positive, 5.5mm outer\/2.1mm inner diameter jack. We got these made with nice beefy 22AWG wires so you can use it for high current draw. Great for single-board computers or really anything that requires 5VDC.\u003c\/p\u003e\n\u003ch5\u003eTechnical details\u003c\/h5\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/images\/product-files\/2697\/2697%20datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 23g\u003c\/li\u003e\n\u003cli\u003eCable Length: 3.3 feet \/ 1meter\u003c\/li\u003e\n\u003cli\u003eWire gauge: 22AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740059089,"sku":"102819","price":2.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-to-2-1mm-male-barrel-jack-cable-22awg-1-meter-the-pi-hut-102819-13720009703486.jpg?v=1646893086"},{"product_id":"microusb-plug-to-5-5-2-1mm-dc-barrel-jack-adapter","title":"MicroUSB Plug to 5.5\/2.1mm DC Barrel Jack Adapter","description":"\u003cp\u003eThe premise of this \u003cstrong\u003eMicroUSB Plug to 5.5\/2.1mm Jack adapter \u003c\/strong\u003eis simple. There's a MicroUSB plug on one end and a 5.5mm\/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, \u003ca href=\"https:\/\/thepihut.com\/\"\u003e5V 4A\u003c\/a\u003e or \u003ca href=\"https:\/\/thepihut.com\/collections\/adafruit-power\"\u003e5V 10 Amp\u003c\/a\u003e adapters to something that expects to connect to 5V USB. \u003ca href=\"https:\/\/thepihut.com\/products\/microusb-to-5-5-2-1mm-dc-barrel-jack-adapter\"\u003eWe also have a shorty adapter-without-cable version\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eSince this does not have any resistors or other connections inside for the data lines, this won't work for charging an iPhone, iPod or iPad or other device which expects some sort of resistance on the D+ and D- connections. It does, however, work great for \u003ca href=\"https:\/\/thepihut.com\/collections\/arduino-store\"\u003eArduinos\u003c\/a\u003e, BeagleBones, \u003ca href=\"https:\/\/thepihut.com\/collections\/raspberry-pi-store\"\u003eRaspberry Pis\u003c\/a\u003e, many generic cellphones \u0026amp; Android devices, as well as most other USB-powered gadgets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThere is no regulator or voltage protection in this adapter cable. If you plug in a 9V or 12V power supply in, you could destroy something expecting only ~5V so be very careful!\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eWeight: 8g\u003c\/li\u003e\n\u003cli\u003eCable length from USB end to barrel jack end: ~6\" \/ 152.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740079377,"sku":"104257","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/microusb-plug-to-5-5-2-1mm-dc-barrel-jack-adapter-the-pi-hut-104257-28609368817859.jpg?v=1646355424"},{"product_id":"usb-to-2-1mm-dc-booster-cable-9v","title":"USB to 2.1mm DC Booster Cable - 9V","description":"\u003cp\u003eThis cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 9V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. \u003ca href=\"https:\/\/thepihut.com\/products\/usb-to-5-5mm-2-1mm-or-2-5mm-dc-booster-cable-12v-output\"\u003eWe also have a version that provides 12V\u003c\/a\u003e, and if you just need a passthough cable, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-to-2-1mm-male-barrel-jack-cable\"\u003ehere's one for 5VDC\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThese are rated at 500mA output, here's our measurements for various current draws when we set our bench supply to provide a steady 5V voltage\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e 50mA (9.0V output), 100mA,  90% efficiency\u003c\/li\u003e\n\u003cli\u003e100ma (8.95), 205mA in, 87% efficiency\u003c\/li\u003e\n\u003cli\u003e200ma (8.9V): 410mA in, 86% efficiency\u003c\/li\u003e\n\u003cli\u003e300ma (8.8V): 620mA in, 85% efficiency\u003c\/li\u003e\n\u003cli\u003e500ma (8.8V): 1060mA in, 83% efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSo, overall there's a 90% efficiency at low current draw that drops do about 80% at high current use. There's also a 3 mA quiescent current. Note that often times the USB port voltage can droop too, and in addition you may have power losses with any thin or low quality cables with high resistivity!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eCable Length: ~1.2m \/ ~47\"\u003c\/li\u003e\n\u003cli\u003eWeight: 35.1g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740106577,"sku":"ADA2777","price":6.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-to-2-1mm-dc-booster-cable-9v-the-pi-hut-ada2777-28609806303427.jpg?v=1646086521"},{"product_id":"usb-to-5-5mm-2-1mm-or-2-5mm-dc-booster-cable-12v-output","title":"USB to 5.5mm \/ 2.1mm or 2.5mm DC Booster Cable - 12V Output","description":"\u003cp\u003eThis cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 12V powered devices with a center-positive DC barrel jack from a USB port. \u003ca href=\"https:\/\/thepihut.com\/products\/usb-to-2-1mm-dc-booster-cable-9v\"\u003eWe also have a version that provides 9V\u003c\/a\u003e, and if you just need a passthough cable, \u003ca href=\"https:\/\/thepihut.com\/products\/usb-to-2-1mm-male-barrel-jack-cable\"\u003ehere's one for 5VDC\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe DC barrel plug has a large 2.5mm opening and springs for the center terminal so it can be used with 2.1mm jacks as well.\u003c\/p\u003e\u003cp\u003eThese are rated at 500mA output, but you can go a little higher, we pulled 700mA and we got a little voltage droop but it worked fine. Probably best not to draw 700mA continuously though!\u003c\/p\u003e\u003cp\u003eHere's our measurements for various current draws when we set our bench supply to provide a steady 5V voltage\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50mA (12.4V output), 150mA,  83% efficiency\u003c\/li\u003e\n\u003cli\u003e100ma (12.4V), 290mA in, 86% efficiency\u003c\/li\u003e\n\u003cli\u003e200ma (12.3V): 570mA in, 86% efficiency\u003c\/li\u003e\n\u003cli\u003e300ma (12.2V): 870mA in, 84% efficiency\u003c\/li\u003e\n\u003cli\u003e500ma (12.1V): 1500mA in, 81% efficiency\u003c\/li\u003e\n\u003cli\u003e700ma (11.4V): 2140mA in, 75% efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSo, overall there's a 85% efficiency at low current draw that drops do about 80% at high current use. There's also a 3 mA quiescent current. Note that often times the USB port voltage can droop too, and in addition you may have power losses with any thin or low quality cables with high resistivity!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eCable Length: approximately ~1.15m \/ ~45\"\u003c\/li\u003e\n\u003cli\u003eWeight: 34.6g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740106961,"sku":"ADA2778","price":6.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/usb-to-5-5mm-2-1mm-or-2-5mm-dc-booster-cable-12v-output-the-pi-hut-ada2778-28609805779139.jpg?v=1646086151"},{"product_id":"3-8-1-3mm-or-3-5-1-1mm-to-5-5-2-1mm-dc-jack-adapter-cable","title":"3.8\/1.3mm or 3.5\/1.1mm to 5.5\/2.1mm DC Jack Adapter Cable","description":"\u003cp\u003eThis convenient \u003cstrong\u003e3.8mm\/1.3mm or 3.5mm\/1.1mm or 1.3mm DC to 2.1mm DC adapter cable \u003c\/strong\u003elets you plug one of our solar panels into \u003ca href=\"https:\/\/thepihut.com\/products\/adafruit-usb-dc-solar-lithium-ion-polymer-charger\"\u003eour optimized Solar Lithium Ion\/Polymer charger\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e2.1mm inner diameter (5.5mm outer diameter) is the most common type of DC plug, but you can use this adapter for anything else that has a 1.1 or 1.3mm ID (3.5-3.8mm OD) DC jack! The adapter has little springy parts inside so it can be used with 3.5mm to 3.8mm OD plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: we received a lot of messages from customers worried that these cables look like they won't fit their solar panel connector (or have tried and failed). The first time you plug them in you really need to give it some grunt, but after that, they loosen up and it's much easier. Just give it a good push!\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eCable Length (end to end): ~165mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740115985,"sku":"105671","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/3-8-1-3mm-or-3-5-1-1mm-to-5-5-2-1mm-dc-jack-adapter-cable-the-pi-hut-ada2788-28609321861315.jpg?v=1646778063"},{"product_id":"2-pin-jst-sm-plug-receptacle-cable-set","title":"2-pin JST SM Plug + Receptacle Cable Set","description":"\u003cp\u003eThese 2-wire cables are 16cm long and come as a set.  One side has a 2-pin JST SM type connector plug on the end.  The other side has a matching 2-pin JST SM type receptacle connector.  They are good for whenever you have 2 wires you want to be able to plug and unplug.  We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the \u003ca href=\"https:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\"\u003eJST SM connector datasheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThese match up with our EL inverters and cables so you can use them for creating custom EL wiring setups.\u003c\/p\u003e\u003cp\u003eEach order receives one of each connector.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cp\u003eCable Length: 16cm \/ 6.3\"\u003c\/p\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740184849,"sku":"ADA2880","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/2-pin-jst-sm-plug-receptacle-cable-set-the-pi-hut-ada2880-28609267531971.jpg?v=1646795883"},{"product_id":"bnc-male-plug-terminal-block","title":"BNC Male Plug Terminal Block","description":"\u003cp\u003eOne truth about working with test equipment is you always need the cable or adapter you \u003cem\u003edon't\u003c\/em\u003e have in your toolbox. That's why we love these terminal-block BNC (Bayonet Neill–Concelman, for those in the know) connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs.\u003c\/p\u003e \u003cp\u003eThis is the \u003cstrong\u003eBNC Male Plug Terminal Block\u003c\/strong\u003e. BNC connectors are one of the most common connectors for signal connections such as:\u003c\/p\u003e \u003cp\u003ePlease note that usually these connectors are attached to coaxial cable with specific impedances. If you have specific matching needs, this probably won't work for you.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bnc-female-jack-terminal-block\"\u003eWe also have a (matching) BNC Female Jack Terminal Block!\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003eLength: 39.4mm \/ 1.55\"\u003c\/li\u003e\n\u003cli\u003eWeight: 11g\u003c\/li\u003e\n\u003c\/ul\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740192785,"sku":"104108","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/bnc-male-plug-terminal-block-the-pi-hut-104108-13722675445822.jpg?v=1646624710"},{"product_id":"bnc-female-jack-terminal-block","title":"BNC Female Jack Terminal Block","description":"\u003cp\u003eOne truth about working with test equipment is you always need the cable or adapter you \u003cem\u003edon't\u003c\/em\u003e have in your toolbox. That's why we love these terminal-block BNC (Bayonet Neill–Concelman, for those in the know) connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs.\u003c\/p\u003e\u003cp\u003eThis is the \u003cstrong\u003eBNC Female Jack Terminal Block\u003c\/strong\u003e. BNC connectors are one of the most common connectors for signal connections such as:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnalog and serial digital interface video signals\u003c\/li\u003e\n\u003cli\u003eDIY radio antennas\u003c\/li\u003e\n\u003cli\u003eTest equipment\u003c\/li\u003e\n\u003cli\u003eComposite video\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note that usually these connectors are attached to coaxial cable with specific impedances. If you have specific matching needs, this probably won't work for you.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/bnc-female-jack-terminal-block\"\u003eWe also have a (matching) BNC Male Plug Terminal Block!\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eLength: 37.9mm \/ 1.49\" +\/- 2mm\/0.08\"\u003c\/li\u003e\n\u003cli\u003eWeight: 8.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740196945,"sku":"ADA2889","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/bnc-female-jack-terminal-block-the-pi-hut-ada2889-28609282703555.jpg?v=1646624702"},{"product_id":"2-1mm-to-2-5mm-dc-barrel-plug-adapter","title":"2.1mm to 2.5mm DC Barrel Plug Adapter","description":"\u003cp\u003e\"Hrmph! All I have is a power supply with a 2.1mm plug and my doodly-whatsit has a 2.5mm jack. I keep trying to force the plug to fit but that 0.4mm difference just wont work....what am I going to do!?\"\u003c\/p\u003e\n\u003cp\u003eENTER \u003cem\u003eThe Adapter.\u003c\/em\u003e This 2.1mm to 2.5mm adapter is the best way to adapt a 2.1mm plug so that it will fit into a 2.5mm jack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemember that this will fit into a device that normally would require a 5.5 OD \/ 2.5mm ID plug, and lets you use a 5.5\/2.1mm plug. \u003c\/strong\u003eOnce this is in place you can just any and all of our DC barrel-plug wall adapters, as they all have 2.1mm plugs.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 41mm x 13mm \/ 1.6\" x 0.5\"\u003c\/li\u003e\n\u003cli\u003eWeight: 4.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740204241,"sku":"105674","price":0.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/2-1mm-to-2-5mm-dc-barrel-plug-adapter-the-pi-hut-ada2897-28609274839235.jpg?v=1646827920"},{"product_id":"ethernet-rj45-female-socket-push-terminal-block","title":"Ethernet RJ45 Female Socket Push-Terminal Block","description":"\u003cp\u003eIf you need to connect an RJ45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! \u003cstrong\u003eNo soldering required. \u003c\/strong\u003eJust push the little buttons and slide in your stranded or solid-core wire. Note that these aren't recommended for actual Ethernet traffic, especially long term...but for basic power\/data distribution, RJ45's are great!\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eEthernet (RJ45) Female Jack Push-Terminal Block\u003c\/strong\u003e. There is a standard RJ45 Ethernet jack on one end, and a push terminal block on the other.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/ethernet-rj45-male-plug-terminal-block\"\u003eWe also have a (matching) Ethernet Male Plug Terminal Block.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eLength (end to end): 36mm \/ 1.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 20.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740212881,"sku":"ADA2912","price":5.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/ethernet-rj45-female-socket-push-terminal-block-the-pi-hut-ada2912-28609769996483.jpg?v=1646549644"},{"product_id":"ethernet-rj45-male-plug-terminal-block","title":"Ethernet RJ45 Male Plug Terminal Block","description":"\u003cp\u003eIf you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! \u003cstrong\u003eNo soldering required. \u003c\/strong\u003eJust use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren't recommended for actual Ethernet traffic, especially long term...but for basic power\/data distribution, RJ45's are great!\u003c\/p\u003e \u003cp\u003eThis is the \u003cstrong\u003eEthernet (RJ45) Male Plug Terminal Block\u003c\/strong\u003e. There is a standard RJ45 Ethernet plug on one end, and a screw terminal block on the other.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note these are wired using the '468b' connection scheme\u003c\/strong\u003e: RJ45 1-2-3-4-5-6-7-8 connects to Screws 3-4-5-2-1-6-7-8\u003c\/p\u003e \u003cp\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/ethernet-rj45-female-socket-push-terminal-block\"\u003eWe also have a (matching) Ethernet Female Jack Terminal Block.\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003eLength (end to end): 53.9mm \/ 2.12\"\u003c\/li\u003e\n\u003cli\u003eWeight: 17.7g\u003c\/li\u003e\n\u003cli\u003eTerminal pitch: 5mm\u003c\/li\u003e\n\u003cli\u003eWire gauge: 26-16AWG\u003c\/li\u003e\n\u003c\/ul\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740213585,"sku":"103738","price":5.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/ethernet-rj45-male-plug-terminal-block-the-pi-hut-103738-13721738739774.jpg?v=1646549464"},{"product_id":"micro-b-usb-2-way-y-splitter-cable","title":"Micro B USB 2-Way Y Splitter Cable","description":"\u003cp\u003eDouble up on your micro USB capabilities with the \u003cstrong\u003eMicro B USB 2-Way Splitter Cable\u003c\/strong\u003e. This splitter is great for reducing cable clutter and freeing up port space. It takes a single Micro B connection (with data and power) and gives you two outputs. \u003cstrong\u003eThe longer cable has data and power brought to it. The shorter cable is only power.\u003c\/strong\u003e You can also use it just for power splitting if data is not needed, of course. Simply connect your existing micro USB cable into one end and enjoy twice the functionality! It will work great with your Raspberry Pi or any other device that uses the standard Micro B cable for power\/data\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eShort Cable: ~180mm \/ ~7.1\"\u003c\/li\u003e\n\u003cli\u003eLong Cable: ~300mm \/ ~11.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 10.3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740287185,"sku":"104268","price":2.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/micro-b-usb-2-way-y-splitter-cable-the-pi-hut-104268-28609459486915.jpg?v=1646386924"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/collections\/261-01_1024x1024_9eb3ac66-0ac0-4161-aeaa-c0d732132f9c.jpg?v=1747655047","url":"https:\/\/thepihut.com\/collections\/adafruit-cables\/usb-style_usb-c.oembed?page=2","provider":"The Pi Hut","version":"1.0","type":"link"}